Hm, but with my method described it won't work so... If you have 2 ADSL Lines (let's say 5 MBit each ) ) after load balacing the bandwidth woud be the same. the only goal is failover for the lines more not. Much ADSL Carriers (like Swisscom in Switzerland) limit the bandwith so you can't go over the limit, or ADSL won't work For this case VDSL is (on my oppion) the better solution, the only requirement for VDSL is a new Router/Modem on the client side, which can handle the higher speed level and of course for VDSL the wires must be excellent quality with no distortion, or otherwise VDSL won't work >On Wed, 12 Sep 2007 11:34:52 +0200 (MEST) >elvis.altherr@xxxxxxxxxx wrote: > >> as i described below: >> >> it's not possible (at the moment) to open 2 ADSL Ports on the same >> telefony wire... so if you have 2 5 MB Lines you will have still 2 >> 5MB Lines after implementing this solution more not) If the Line is >> open (on the DSLAM which is managed by the telefony carrier, you have >> normally one port configured for ADSL) >> >> So its a illusion to think, that you can do this > >The OP did refer to two adsl lines. However there is not all that much >redundancy in this scheme, since a lot of faults will takeout both >lines . You can increase it if there are multiple companies with >their own dsl equipment in the exchange. Some people use cable+adsl for >this kind of thing. > >I guess the idea here though is just to improve bandwidth. > > _____________________________________________________________ NEU: Ihre Photos online verwalten, mit anderen teilen und die besten Bilder gleich entwickeln lassen - GRATIS für den 1. Monat (exkl. Entwicklung) www.sunrise.ch/photoalbum
