Search squid archive

Re: Squid 3.0-PRE7 won't build with snmp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

At 21.37 05/09/2007, Nicole wrote:

On 05-Sep-07 My Secret NSA Wiretap Overheard Guido Serassio Saying  :
> Hi,
>
> At 02.12 05/09/2007, Nicole wrote:
>
>>  Squid 3.0-PRE7 seems to not build if you have --enable-snmp.
>>  Server was FreeBSD-6.2 amd64
>>
>>  When --disable-snmp was specified it built ok. Which seems to be opposite
>>perhaps from a bug I noticed, #2071
>
> It should be a dependency problem in Makefile: running make clean
> before the build should fix the problem.
>
> See my comment to the bug #2071:
> http://www.squid-cache.org/bugs/show_bug.cgi?id=2071.
>
> Regards
>
> Guido Serassio
>
>

 Hi
 Yes I tried that. Sadly the build still fails.

 In fact I was also surprised that snmp was enabled by
default and that I had to use --disable-snmp to get it to build.

I have done the following test:

- configure --enable-snmp
- make (OK)
- configure --disable-snmp (but also configure only should be the same)
- make (FAILED, because the files are not compiled again)
- removed manually the .o files
- make (OK)

Please check if make clean really remove the .o files.
I will run some more build test.

Regards

Guido



-
========================================================
Guido Serassio
Acme Consulting S.r.l. - Microsoft Certified Partner
Via Lucia Savarino, 1           10098 - Rivoli (TO) - ITALY
Tel. : +39.011.9530135  Fax. : +39.011.9781115
Email: guido.serassio@xxxxxxxxxxxxxxxxx
WWW: http://www.acmeconsulting.it/


[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux