Hi Antonio, Antonio Pereira wrote:
Hello, I have an existing firewall and would like to use squid to do url filtering and blocking. What is the best setup for this 1or 2 nic cards and if to setup squid as a transparent proxy or a proxy. What is your opinions to those who are already using it under my present setup. I have 4 sites connecting to the internet through one site and that is where the firewall is and now I would like to start filtering and blocking.
Is your firewall a Linux/Unix box or a hardware product? What do the 4 sites mean? Do they mean 4 different networks? If they are 4 different networks, then how are they connected to the firewall?
The number of network interfaces depends upon how your 4 sites are connected to the firewall or how your router handles web traffic from the 4 sites.
I think that your best solution would be to setup Squid in bridge mode and placing it in front of your firewall.
If you need to use authentication or want to make it mandatory for your users to configure the proxy settings in their web browsers, then you just need a normal forward proxy.
If you don't want your users to manually configure the proxy settings in their respective browsers and also want to force your users web traffic to go via Squid, then a transparent proxy will be good for you.
Thanking you...
Any ideas? Thanks
-- With best regards and good wishes, Yours sincerely, Tek Bahadur Limbu (TAG/TDG Group) Jwl Systems Department Worldlink Communications Pvt. Ltd. Jawalakhel, Nepal http://www.wlink.com.np
