Hi Juan, Thanks for the tip, could you possibly explain a little more about the loopback ip, im a little confused :) Thanks On 8/30/07, Juan C. Crespo R. <jcrespo@xxxxxxxxxxxx> wrote: > > You should use one loopback ip instead of one adquiring from a dhcp server, > remember if the Wan ip changes, your tunnel will not work.. > > And that will not make you happy :D > > > Ian escribió: > Hi Henrik, > > We got it working in the end after debugging on the cisco we saw that > the traffic was coming from the ADSL PPPoE's IP and not from the > routers LAN address. We changed the tunnel to be 10.10.250.1 -> > 41.x.x.x and it then worked fine. > > Thanks :) > Ian > > On 8/30/07, Henrik Nordstrom <henrik@xxxxxxxxxxxxxxxxxxx> wrote: > > > On ons, 2007-08-29 at 08:45 +0200, Ian wrote: > > > Hi, > > Yes, the GRE is working. My unit is 10.10.11.1 and the cisco is 10.10.250.1: > > Do you see packets arriving on the GRE interface? > > And do you have matching firewall rules to redirect these packets to the > Squid port? > > Regards > Henrik > > > > > >
