http_port 3128 transparent That should do it. Adrian On Fri, Aug 10, 2007, Indunil Jayasooriya wrote: > Hi, > > I am running squid as a TRANSEPARENT PROXY WITH SQUID 2.5 on CENTOS 4.5. > > Pls see below for squid.con file. > > > http_port 3128 > cache_mem 64 MB > cache_dir ufs /var/spool/squid 100 16 256 > cache_access_log /var/log/squid/access.log > cache_log /var/log/squid/cache.log > cache_store_log /var/log/squid/store.log > > # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS > > # Example rule allowing access from your local networks. Adapt > # to list your (internal) IP networks from where browsing should > # be allowed > > acl mynet src 192.168.101.0/24 > http_access allow mynet > > httpd_accel_host virtual > httpd_accel_port 80 > httpd_accel_with_proxy on > httpd_accel_uses_host_header on > > > I am ruunnig itables on the SAME BOX. I have added below rules for squid. > > #Redirecting traffic destined to port 80 to port 3128 > iptables -t nat -A PREROUTING -p tcp -i eth2 --dport 80 -j REDIRECT > --to-port 3128 > > #For squid traffic to Accept > iptables -A INPUT -i eth2 -d 192.168.101.254 -p tcp -s > 192.168.101.0/24 --dport 3128 -j ACCEPT > > Evrything works fine. > > Now, I am ging to upgrade CENTOS 4.5 to CENTOS 5. It comes with SQUID 2.6. > > But, squid.conf file in SQUID 2.6 has no below lines. > > httpd_accel_host virtual > httpd_accel_port 80 > httpd_accel_with_proxy on > httpd_accel_uses_host_header on > > So, I want to know how to setup squid as a TRANSEPARENT PROXY, when it > comes to SQUID 2.6. > > any idea? > -- > Thank you > Indunil Jayasooriya -- - Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support - - $25/pm entry-level bandwidth-capped VPSes available in WA -
