Search squid archive

Re: Cannot connect to Squid's default port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



These are the results of running the commands. Does it look like there is anything that could be
interfering with port 3128 connections?

--------------------------------------------------------------------
> iptables-save
# Generated by iptables-save v1.2.11 on Thu Jun 28 15:32:38 2007
*nat
:PREROUTING ACCEPT [525278:45243592]
:POSTROUTING ACCEPT [420:38931]
:OUTPUT ACCEPT [420:38931]
COMMIT
# Completed on Thu Jun 28 15:32:38 2007
# Generated by iptables-save v1.2.11 on Thu Jun 28 15:32:38 2007
*mangle
:PREROUTING ACCEPT [702539:100216603]
:INPUT ACCEPT [211958:57721156]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [76059:28676083]
:POSTROUTING ACCEPT [76059:28676083]
COMMIT
# Completed on Thu Jun 28 15:32:38 2007
# Generated by iptables-save v1.2.11 on Thu Jun 28 15:32:38 2007
*filter
:INPUT ACCEPT [535723:156552090]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [177395:71003870]
COMMIT
# Completed on Thu Jun 28 15:32:38 2007
--------------------------------------------------------------------
> iptables --list
Chain INPUT (policy ACCEPT)
target     prot opt source               destination         

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination         

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination       
--------------------------------------------------------------------
> iptables -n -L INPUT
Chain INPUT (policy ACCEPT)
target     prot opt source               destination      
--------------------------------------------------------------------
> telnet #.#.#.# 3128   [FROM CLIENT]
Could not open connection to host on port 3128. Connection failed
--------------------------------------------------------------------
tcpdump -n -i any port 3128
WARNING: Promiscuous mode not support on the "any" device
--------------------------------------------------------------------


> > Could you advise of how I can determine if there is some firewall running? 
> 
> To check if there is a local firewall running:
> 
> iptables-save
> 
> To check if there is a firewall between the client and the Squid server:
> 
> run "tcpdump -n -i any port 3128" on the Squid server, then on a client
> run "telnet ip.of.squid.server 3128".
> 
> Regards
> Henrik
> 



 
____________________________________________________________________________________
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121

[Index of Archives]     [Linux Audio Users]     [Samba]     [Big List of Linux Books]     [Linux USB]     [Yosemite News]

  Powered by Linux