I have squid 2.6.Stable 13 installed on two transparent proxy servers. configured as a sibling working fine with this configuration: >Proxy1: >icp_port 3130 >icp_hit_stale off >cache_peer proxy2 sibling 3128 3130 no-netdb-exchange proxy-only no-digest >no-delay >log_icp_queries off >icp_query_timeout 500 >http_access allow Proxy2 >icp_access allow Proxy2 >visible_hostname Proxy1 > >Proxy2: >icp_port 3130 >icp_hit_stale off >cache_peer proxy1 sibling 3128 3130 no-netdb-exchange proxy-only no-digest >no-delay >log_icp_queries off >icp_query_timeout 500 >http_access allow Proxy1 >icp_access allow Proxy1 >visible_hostname Proxy2 > Best regards On 6/5/2007, "Juraj Sakala" <juraj.sakala@xxxxxxxxxxxx> wrote: >> Added that line and didn't help :(. >> >> This is what happens: >> >> 1) Squids were configured without sibling. >> 2) Configured sibling on each squid as showed before (4 cache_peer >> lines per squid, total 5 squids). >> 3) Reloaded (not restarted) squid. Sibling started working.... After a >> while (~20 secs). Stopped working. >> 4) Changed some settings (disable siblings, reloaded, enabled >> siblings, reloaded) and no ICP requests were sent. >> 5) Restarted Squid and sibling started working again for ~20 secs again. >> >> So every change I make I have to restart squid :( >> >> About if I see SIBLING_HITs on my access.log, yes, for those 20 secs >> sibling works. I see SIBLING_HITs :( > >It is strange problem. I use ICP without problems. Which version of squid do >you use? >Do you have checked cache.log? > >This is part of my working config, perhaps it will be helpful for you: > >Proxy1: >icp_port 3130 >icp_hit_stale off >cache_peer proxy2 sibling 3128 3130 no-netdb-exchange proxy-only no-digest >no-delay >log_icp_queries off >icp_query_timeout 500 >http_access allow Proxy2 >icp_access allow Proxy2 >visible_hostname Proxy1 > >Proxy2: >icp_port 3130 >icp_hit_stale off >cache_peer proxy1 sibling 3128 3130 no-netdb-exchange proxy-only no-digest >no-delay >log_icp_queries off >icp_query_timeout 500 >http_access allow Proxy1 >icp_access allow Proxy1 >visible_hostname Proxy2 > >
