Nothing :( I'm using version 2.5.STABLE14 I've checked cache.log, nothing appears :( nothing comes into my mind! I used tethereal to see if the switch or some kind of firewall were filtering packets, but it's not the case :(, packets stop being sent by squids :( I'm about to start crying! :( On 6/5/07, Juraj Sakala <juraj.sakala@xxxxxxxxxxxx> wrote: > > Added that line and didn't help :(. > > > > This is what happens: > > > > 1) Squids were configured without sibling. > > 2) Configured sibling on each squid as showed before (4 cache_peer > > lines per squid, total 5 squids). > > 3) Reloaded (not restarted) squid. Sibling started working.... After a > > while (~20 secs). Stopped working. > > 4) Changed some settings (disable siblings, reloaded, enabled > > siblings, reloaded) and no ICP requests were sent. > > 5) Restarted Squid and sibling started working again for ~20 secs again. > > > > So every change I make I have to restart squid :( > > > > About if I see SIBLING_HITs on my access.log, yes, for those 20 secs > > sibling works. I see SIBLING_HITs :( > > It is strange problem. I use ICP without problems. Which version of squid do > you use? > Do you have checked cache.log? > > This is part of my working config, perhaps it will be helpful for you: > > Proxy1: > icp_port 3130 > icp_hit_stale off > cache_peer proxy2 sibling 3128 3130 no-netdb-exchange proxy-only no-digest > no-delay > log_icp_queries off > icp_query_timeout 500 > http_access allow Proxy2 > icp_access allow Proxy2 > visible_hostname Proxy1 > > Proxy2: > icp_port 3130 > icp_hit_stale off > cache_peer proxy1 sibling 3128 3130 no-netdb-exchange proxy-only no-digest > no-delay > log_icp_queries off > icp_query_timeout 500 > http_access allow Proxy1 > icp_access allow Proxy1 > visible_hostname Proxy2 > Sunil, i'm glad it helped you :) On 6/5/07, Sunil K.P. <sunil@xxxxxxxxxxx> wrote: > Greetings, > > Thanks a lot. > I was having problems with the sibling hits and it got solved. > > Regards > Sunil Cheers! Santiago
