Dave,
Thanks for response. It would be very helpful to see tcpdump of the following:
1. member caches multicast/unicast HereIam
2. Router's ISeeYou shows 2way connectivity with the caches
3. lead cache multicasts/unicasts RedirectAssign
4. Router's ISeeYou showing the bucket-assignments made
Also the output of "sh ip wccp XX detail" from your router(cisco
enterprise router)?
Thanks in advance for your help and sorry for the trouble.
On 6/1/07, Dave <dcas@xxxxxxxxxx> wrote:
hey thanks for your help. Do you still want to see the TCPDUMP so you
can examine it to see if it helps with your issue of the bucket
assignment being reserved ?
Dave
varadha tech wrote:
> Dave,
> Thanks for the attachment and response. The I_SEE_YOU after the
> REDIRECT_ASSIGN is crucial as that would confirm if the router has
> indeed complied with the request by the lead cache in REDIRECT_ASSIGN.
> So if you get a chance to look at that, let me know or send me a
> longer trace of the WCCP packet capture - mainly to understand what's
> in the WCCP packets that is tickling the router to evenly load balance
> rather than load distribute according to the weights specified.
> Secondly did you see the data traffic being redirected across the two
> caches and what was the wccp status output ("sh ip wccp XX detail" )
> at the router? Thanks again.
>
> On 5/30/07, Dave <dcas@xxxxxxxxxx> wrote:
>> It is on a cisco 12.4(4t3 advanced enterprise)
>>
>> I have emailed you a packet trace.
>>
>> Thank you.
>>
>> varadha tech wrote:
>> > Dave,
>> > Is it possible for you to send a packet trace of the problem you see?
>> > What is the router/IOS version that is used? I see a different problem
>> > wherein the bucket assignment order is reversed at the router. Thanks.
>> >
>> > On 5/29/07, Dave <dcas@xxxxxxxxxx> wrote:
>> >> Hi,
>> >>
>> >> I have just upgraded to running WCCPv2 on squid 2.6 stable12.
>> Everything
>> >> is working apart from load being able to assign the weight of each
>> proxy
>> >> to the routers.
>> >>
>> >> In the squid.conf I have the following
>> >>
>> >> wccp2_forwarding_method 1
>> >> wccp2_return_method 1
>> >> wccp2_service standard 0
>> >> wccp2_assignment_method 1
>> >>
>> >> On one server - wccp2_weight 200
>> >> On the other - wccp2_weight 100
>> >>
>> >> But inside the router it still show 50% hash assignment.
>> >>
>> >> If I examine HERE_I_AM and I_SEE_YOU packets I can see the correct
>> >> weight is being sent to the server as well.
>> >>
>> >> Any ideas ?
>> >>
>> >> Thank you
>> >>
>> >>
>> >
>> >
>>
>
>
