Found it, but what should I change it too? I tried nobody and squid, but I still get the same error: FATAL: failed to make swap directory /usr.local/squid/var/cache/00: (13) Permission denied. Regards, Jon Faranda ________________________________________ From: Juan C. Crespo R. [mailto:jcrespo@xxxxxxxxxxxx] Sent: Monday, March 26, 2007 11:39 AM To: Jonathan Faranda Cc: squid-users@xxxxxxxxxxxxxxx Subject: Re: Reverse proxy with 2 Nics Jonathan Try to find the setting of cache_effective_user cache_effective_group Regards =) Jonathan Faranda escribió: Hi, I upgraded to Squid 2.6.STABLE12 and made the adjustments you mentioned. I tried and start squid with /usr/local/squid/sbin/squid -z and I get the following error: FATAL: Failed to make swap directory /usr/local/squid/var/cache: (13) Permission denied I am executing this as root so I don't understand the problem. Regards, Jon Faranda -----Original Message----- From: Amos Jeffries [mailto:squid3@xxxxxxxxxxxxx] Sent: Monday, March 26, 2007 8:47 AM To: Jonathan Faranda Cc: squid-users@xxxxxxxxxxxxxxx Subject: Re: Reverse proxy with 2 Nics Jonathan Faranda wrote: Hi All, I am attempting to setup a reverse proxy using two nics on a Centos 4.4 box. Nic 1 (eth0 - 192.168.1.3) is where I want my outside world to see and Nic 2 (eth1 - 192.168.3.1) is the network where my webserver resides. I have modified my squid.conf as follows: visible_hostname name_of_reverse_proxy http_port name_of_reverse_proxy:80 tcp_outgoing_address 192.168.3.1 #Nic 2 interface httpd_accel_host 192.168.3.2 #the webserver address httpd_accel_port 80 httpd_accel_single_host on httpd_accel_with_proxy off httpd_accel_uses_host_header on > > I have no firewall running since I flushed the rules with /sbin/iptables -F > > I am assuming it's a routing problem, but I do not understand how to do this. Any ideas? Thanks. > > Regards, > > Jon Faranda It looks like you are trying to use squid2.5 I highly recommend upgrading to squid2.6 or 3.0 Then the configuration becomes simply: visible_hostname name_of_reverse_proxy http_port 192.168.1.3:80 accel http_port 192.168.3.1:80 accel and a secure acl setup takes care of the rest, as per whatever you wish. checkout this page: http://www.visolve.com/squid/squid30/network.php#http_port I believe most of the parameters in this section apply to squid2.6 and 3.0 both. Amos
