Awie, 1. yes 2. use the wccp2_router instead of wccp_router 3. yes 4/5. You'll have to read up on this one, i ended up moving from a 2.4 kernel with a wccp module compiled to a 2.6.9+ kernel with the ip_gre module. I guess try your setup and if it doesn't work you can hopefully upgrade or test on another system. Thanks, Bryan On Fri, 2007-02-02 at 09:24 -0500, Awie wrote: > Hi Bryan, > > Thanks for your suggestion. I will do your suggest but I want to make > sure > before I do the job. Please correct me. > > 1. I will compile new version of Squid (ie. 2.6S9) with > "--enable-wccpv2" > option > 2. Change the squid.conf to match the setting parameter of new Squid > version > 3. Change the Cisco Router WCCP from version 1 to version 2. > 4. Keep the current Linux kernel 2.4.34 that support WCCPv2 > 5. Keep the current ip_wccp.o (version 1.7) that already support > WCCPv2 > > Please advise > > Thx & Rgds, > > Awie > > > ----- Original Message ----- > From: "Bryan Shoebottom" <bshoebottom@xxxxxxxxxxxx> > To: "Awie" <awie@xxxxxxxxxxx> > Cc: "Squid-users" <squid-users@xxxxxxxxxxxxxxx> > Sent: Friday, February 02, 2007 21:33 > Subject: Re: WCCP issue > > > > Awie, > > > > I had a similar problem with only a couple sites, specifically mail > ones > > like hotmail, gmail, etc. I found a lot of documentation to work > with > > the redirect rule in the firewall on the squid server but this > didn't > > make a difference. I finally compiled in WCCPv2 support (into the > 2.5S > > code at the time), and all my problems went away! I am currently > using > > 2.6S9 on one server and 2.6S4 on another with --enable-wccpv2 and > have > > had no complaints. > > Hope this helps. > > > > -- > > Thanks, > > > > Bryan Shoebottom CCNA > > Network & Systems Analyst > > Network Services & Computer Operations > > Fanshawe College > > Phone: (519) 452-4430 x4904 > > Fax: (519) 453-3231 > > BShoebottom@xxxxxxxxxxxx > > > > On Fri, 2007-02-02 at 04:40 -0500, Awie wrote: > > > Dear all, > > > > > > After running for more than 1 year, our proxy cannot serve > normally > > > all > > > request to hotmail.com (only, Yahoo mail is OK). Our proxy is > running > > > Squid > > > 2.5S14 with WCCPv1 (WCCP module version 1.7). We tried to upgrade > to > > > 2.6S9 > > > but we got same result. > > > > > > If we run the proxy as non-transparent or run as transparent by > using > > > "route > > > map" the request to hotmail.com can be served normally. Problem > was > > > always > > > happen with WCCP. > > > > > > Would you tell me what I should do to solve the problem? I prefer > to > > > use > > > WCCP instead of "route map" that consume more CPU resource and > create > > > problem when our proxy dies. > > > > > > Thanks a lot for your kind help. > > > > > > Thx & Rgds, > > > > > > Awie > > > > > > > > > > > > > > > > >
