I had this problem before as I have more than one ip on the cisco router and I write the wrong ip of the wccp router command so be sure that the ip of wccp router is the same with the router id which is (10.100.0.21) in your case. Eng . Hamed Adel Senior Network Engineer Mail: hamedadel@xxxxxxxxxxxxxxxx Tel : +2 0502528897 Mob: +2 0103503888 Fax: +2 0502528897 Web site: www.egyptnetwork.com -----Original Message----- From: Dominique Demore [mailto:demored@xxxxxxxxxxxxxxxxx] Sent: Wednesday, September 06, 2006 4:31 AM To: squid-users@xxxxxxxxxxxxxxx Subject: WCCPv2 + Squid v2.6 Stable3 Hi Everyone, For the past few days, I've been having trouble getting squid to connect to our router. After enabling squid, when I issue the "ip wccp web-cache detail" I get the following: -------------- WCCP Cache-Engine information: Web Cache ID: 10.100.0.21 Protocol Version: 2.0 State: NOT Usable Redirection: L2 Packet Return: L2 Packets Redirected: 0 Connect Time: 00:00:24 Assignment: MASK --------------- When I issue a debug off the router I am seeing the following: --------------- Sep 5 21:23:22 EDT: WCCP-EVNT:S00: Here_I_Am packet from 10.100.0.21 w/bad rcv_id 00000000 Sep 5 21:23:22 EDT: WCCP-PKT:S00: Sending I_See_You packet to 10.100.0.21 w/ rcv_id 00000106 Sep 5 21:23:27 EDT: WCCP-PKT:S00: Sending Removal_Query packet to 10.100.0.21w/ rcv_id 00000107 Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: S00 Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: deallocate rtr_view (24 bytes) Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: allocate hash rtr_view (1560 bytes) Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_change_router_view: rtr_view_size set to 24 bytes Sep 5 21:23:32 EDT: WCCP-EVNT:S00: Built new router view: 0 routers, 0 usable web caches, change # 00000041 Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_copy_wc_assignment_data: enter Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_copy_wc_assignment_data: allocate orig hash info (40 bytes) Sep 5 21:23:32 EDT: WCCP-EVNT:wccp_copy_wc_assignment_data: exit Sep 5 21:23:32 EDT: WCCP-PKT:S00: Sending I_See_You packet to 10.100.0.21 w/ rcv_id 00000108 Sep 5 21:23:42 EDT: WCCP-EVNT:S00: Here_I_Am packet from 10.100.0.21 w/bad rcv_id 00000000 Sep 5 21:23:42 EDT: WCCP-PKT:S00: Sending I_See_You packet to 10.100.0.21 w/ rcv_id 00000109 ---------------- I am curious to why "WCCP-EVNT:S00: Here_I_Am packet from 10.100.0.21 w/bad rcv_id 00000000" is occuring. Squid is installed on RHEL 4.0 Cisco 7606 w/SUP720 [IOS 12.2(17d)SXB1] Anyone else experience this issue.. I have seen some message in the mailing list, but haven't really found a solution. Any help would be greatly appreciated. Thanks. -- Dominique ----- Dominique Démoré Technical Services Coordinator Rainbow District School Board 69 Young Street Sudbury, Ontario P3E 3G5 Tel: (705) 674-3171 x. 258 Fax: (705) 671-2442
