My config options configure options: '--prefix=/usr' '--exec_prefix=/usr' '--bindir=/usr/sbin' '--sbindir=/usr/sbin' '--libexecdir=/usr/lib/squid' '--sysconfdir=/etc/squid' '--localstatedir=/var/spool/squid' '--datadir=/usr/share/squid' '--enable-async-io' '--with-pthreads' '--enable-storeio=ufs,aufs,diskd,null' '--enable-linux-netfilter' '--enable-linux-proxy' '--enable-arp-acl' '--enable-epoll' '--enable-removal-policies=lru,heap' '--enable-snmp' '--enable-delay-pools' '--enable-htcp' '--enable-cache-digests' '--enable-underscores' '--enable-referer-log' '--enable-useragent-log' '--enable-auth=basic,digest,ntlm' '--enable-carp' '--with-large-files' 'i386-debian-linux' 'build_alias=i386-debian-linux' 'host_alias=i386-debian-linux' 'target_alias=i386-debian-linux' -----Original Message----- From: Adrian Chadd [mailto:adrian@xxxxxxxxxxxxxxx] Sent: Saturday, 2 September 2006 12:46 PM To: Stephen Fletcher Cc: squid-users@xxxxxxxxxxxxxxx Subject: Re: WCCPv2 GRE with 2.6 on Linux On Sat, Sep 02, 2006, Stephen Fletcher wrote: > Hi > I have compiled the Debian Unstable package of Squid 2.6.3 and cannot get > WCCPv2 GRE working. > I have built with standard confiure options so WCCPv2 support should be > available. I configure my wccp2_router and leave it as other default wccp2 > options such that it is using ID 0 and GRE. I see the squid proxy ip has > register itself with my Pix. However when GRE packets are sent to the Squid > cache there is no response from Squid. I can't see squid listening on > protocol 47, and nothing shows in the squid access.log. Can you post a squid -v? I've been running squid-2.6 and squid-3 with wccpv2 and it works fine. The thing I initially forgot was --enable-linux-netfilter. It'll run; it just won't work. :) > Registered with Pix... > WCCP-PKT:S00: Received valid Here_I_Am packet from 172.16.1.7 w/rcv_id > 00001AA4 > WCCP-PKT:S00: Sending I_See_You packet to 172.16.1.7 w/ rcv_id 00001AA5 > > I also decided to try using the ip_wccp module instead of ip_gre but it > wouldn't compile with 2.6.17.8. I would prefer to not pursue this method > however. Have you bought up a 'fake' gre interface just so the kernel will handle incoming GRE? also, have you turned on ip forwarding and turned off rp_filter ? adrian
