Hello All,
I tried to benchmark squid with the polygraph,with a polyserver and two
polyclients
when i give the parameter(TheBench.peak_req_rate= 800/sec;)same in
workloads(.pg file) of all the three machine the test is running
successfully
But when i give the parameter as
*Polyserver*
TheBench.peak_req_rate = 800/sec;
*Polyclient1*
TheBench.peak_req_rate = 400/sec;
*Polyclient2*
TheBench.peak_req_rate = 400/sec;
It threw the error
000.10| Connection.cc:485: error: 1/1 (s113) No route to host
000.10| error: raw write after connect failed
000.10| connection to 10.1.129.179:8080 failed after 0 reads, 0 writes, 1 xacts
000.10| Connection.cc:485: error: 2/2 (s113) No route to host
000.10| error: raw write after connect failed
*Should the parameter(TheBench.peak_req_rate) in **workload(.pg file) be
same for all the server and client machines.
*If so what is the use of using two polyclients.*
*
Thanks in Advance
-- Prabu.M.A
