Hi, On Thu, 2 Mar 2006 16:04:53 -0300, "Damian Mantelli (A.C.A.R.A)" <dmantelli@xxxxxxxxxxxx> said: > Yes, you must to set up the delay_pools correctly. > > With that you can divide the bandwidth between groups of ip´s. > Do you also know how to make those grops borrow bandwidth from eachother? (if the other group isn't using its share of bandwidth, that is) Rudi > Example of how I configure my squid.conf with those parameters > > ##################Bandwith Control - Delay > Pools########################### > > delay_pools 3 > delay_class 1 2 > delay_parameters 1 -1/-1 -1/-1 > delay_access 1 allow 512kbytes #This permit 512k download to the ACL > named 512kbytes previously defined > > delay_class 2 2 > delay_parameters 2 64000/64000 32000/48000 > delay_access 2 allow 256kbytes #This permit 256k download to the ACL > named 256kbytes previously defined > > delay_class 3 2 > delay_parameters 3 64000/64000 8000/10000 > delay_access 3 allow 128kbytes #This permit 128k download to the ACL > named 128kbytes previously defined > > > ############################END Delay > Pools################################ > > You know how to separate Ip´s between different ACLs?? > > > > > Ing. Damián Mantelli ? Dpto. de Sistemas - A.C.A.R.A. -[sugit] > Av. Libertador 6250 3º - CP: 1428 - > Ciudad Autonoma de Buenos Aires - Argentina > E-mail: dmantelli@xxxxxxxxxxxx > Tel: (5411) 4787-5200 Int 111 > Fax : (5411) 4787-5200 Int 118 > > -----Mensaje original----- > De: Michael Fernández M. [mailto:mfernandez@xxxxxxxxx] > Enviado el: jueves, 02 de marzo de 2006 12:48 > Para: squid-users@xxxxxxxxxxxxxxx > Asunto: bandwidth > > hi.... > > I have a connection with an ISP (100 Mbps) ... so i want to divide the > bandwidth between groups of ip's---- > > the idea is to give priority to a specifics groups because this groups > access to important sites... > > Someone have done this? > > Thanks!!! > > Michael.- > > > > > > -- -- http://www.fastmail.fm - Email service worth paying for. Try it for free
