hello, I have a RHELv4 cache + Cisco IOS Software, C1700 Software (C1700-K9O3SY7-M), Version 12.3(14)T2, RELEASE SOFTWARE (fc4). I have applied your suggestions, but it's still not working. Please take a lookt at my Router's + Squid config. Am I missing something ? ----------------- ! version 12.3 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable password xxxxxxxx ! no aaa new-model ! resource policy ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero ip wccp version 1 ip wccp web-cache ! ! no ip dhcp use vrf connected ! ! ip cef no ip ips deny-action ips-interface ! no ftp-server write-enable ! interface Ethernet0 ip address x.x.x.x 255.255.255.x no ip route-cache cef full-duplex ! interface FastEthernet0 ip address y.y.y.y 255.255.255.x ip wccp web-cache redirect out speed auto full-duplex ! interface Serial0 no ip address shutdown no fair-queue ! ip classless ip route 0.0.0.0 0.0.0.0 y.y.y.5 no ip http server no ip http secure-server ! control-plane ! line con 0 line aux 0 line vty 0 4 password xxxxxxxx login ! end -------------------- /etc/sysctl.conf ----------- [root@server conf]# cat gre0/rp_filter 1 [root@server conf]# cat bond0/rp_filter 1 Squid.conf ------------ http_port [Server IP]:3128 icp_port 3130 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? no_cache deny QUERY cache_mem 256 MB cache_swap_low 90 cache_swap_high 95 maximum_object_size 4096 KB minimum_object_size 0 KB maximum_object_size_in_memory 8 KB cache_dir ufs /usr/local/squid/var/cache 20240 16 256 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log mime_table /usr/local/squid/etc/mime.conf pid_filename /var/run/squid.pid auth_param basic children 5 auth_param basic realm Squid proxy-caching web server auth_param basic credentialsttl 2 hours auth_param basic casesensitive off refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT acl Local src [My Local Network] http_access allow Local http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports acl our_networks src [my network] http_access allow our_networks http_access deny all http_reply_access allow all icp_access allow all icp_access allow all tcp_outgoing_address [Server IP] cache_mgr postmaster@xxxxxxxxxxxx cache_effective_user squid cache_effective_group squid visible_hostname cache.mydomain.com httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on logfile_rotate 10 forwarded_for on cachemgr_passwd xxxxxxxxxxxx shutdown snmp_port 3401 snmp_access deny all wccp_router [Router IP] wccp_outgoing_address [Server IP] coredump_dir /usr/local/squid/var/cache Regards, Waiting for answer Thanks Dan On 2/22/06, Daniel EPEE LEA <epeelea@xxxxxxxxx> wrote: > Hi, > My kernel is 2.6.9-22.ELsmp #1 SMP > And I have loaded the ip_gre module. > Please can you point out where I do not get it ? > > Regards, > >
