Hello !!
Please help me.
I need set up transparent proxy with linux machine.
This is the network layout:
LAN-(eth0)squid(eth1)-(lan-ip address)JuniperFirewall(ISP-IP)-ISP Router
eth0. 172.21.253.250
eth1 172.21.253.251
Juniper: 172.21.253.254
this is good, or i need use another ip address in eth1?
i need dansguardian, i set up that.
I make these settings, but not working in transparent. If i set up the
address in the browser, this OK.
httpd_accel_port 80
httpd_accel_single_host off
httpd_accel_with_proxy on
httpd_accel_uses_host_header on
httpd_accel_host virtual
and the iptables:
iptables -A PREROUTING -t nat -m tcp -p tcp --dport 80 -j REDIRECT
--to-port 8081
the dansguardian looking in port 8081 and the proxy is in the 8080.
Thank you your help.
Csaba
