Hello, I have been trying to get wccp and squid to work and have been unsuccessful so far. I have followed the FAQ at http://www.squid-cache.org/Doc/FAQ/FAQ-17.html#ss17.13 with the following configurations Trustix 2.4.31 squid 2.5S10 Slackware 2.4.31 squid 2.5S10 Slackware 2.6.10 squid 2.5S10 Slackware 2.6.10 squid 2.5S11 FreeBSD 5.4 Squid 2.5S10 I have tried these combinations with IOS version 12.1.26E and 12.2.18SXD6 and still not solution. I have tried setting the wccp_incoming_address and wccp_outgoing_address to the IP of my only network card, but still nothing works. The following is what i see from my router: MDIST#sho ip wcc we det WCCP Cache-Engine information: Web Cache ID: 0.0.0.0 Protocol Version: 0.4 State: Usable Redirection: GRE Packet Return: GRE Assignment: HASH Initial Hash Info: 00000000000000000000000000000000 00000000000000000000000000000000 Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Hash Allotment: 256 (100.00%) Packets Redirected: 15 Connect Time: 03:16:30 MDIST#sho ip wcc we view WCCP Routers Informed of: -none- WCCP Cache Engines Visible: 10.10.144.2 WCCP Cache Engines NOT Visible: -none- MDIST# Running WCCP packet debug, i can see that the received a Here I am packet and then responds with an I See You packet. The router then assigns the complete hash to the squid server, but the servers responds with no hash assigned. Could it be my gre is setup improperly? It seems as if the squid server doesn't receive/understand anything that is coming from the router. In FreeBSD i have: # Kernel settings options IPFIREWALL options IPFIREWALL_DEFAULT_TO_ACCEPT options IPFIREWALL_FORWARD device gre # GRE tunnel settings ifconfig gre0 create ifconfig gre0 10.10.144.2 10.10.144.1 netmask 255.255.255.255 up ifconfig gre0 tunnel 10.10.144.2 10.10.144.1 route delete 10.10.144.1 # Firewall settings ipfw add fwd 127.0.0.1,3128 tcp from any to any 80 in Thanks, Bryan
