Move all the cache files and log files to a mount point with 20 gig, The Drive is not full and I turned debug on in squid.conf just recently, Waiting for it to fail again. When it does, I'll look for the debug file. ______________________________________________________________________________ | John R. Van Lanen, Manager of Network Operations Voice: (330) 264-6047 | | Tri-County Computer Services Association (TCCSA) Fax: (330) 264-5703 | | "Do not meddle in the affairs of dragons, E-mail:vanlanen@xxxxxxxxx| | because you are crunchy and taste good with ketchup" | ------------------------------------------------------------------------------ > > Running Squid Stable 2.5 ver 3 that comes with the > > Redhat ES 3.0 > > > > The issue I have is that squid will stop dead, > > > > Do a squid status and it shows > > > > squid dead but pid file exists > > squid: ERROR Could not send signal 0 to process > > 5530: (3) No such process, > > > > Have seen this before, restart squid or rebooting > > solves the issue for awhile, > > but, under load it occurrs again. > > > > The 5530 process number changes. > > > > Cache.log shows nothing but normal stuff. > > > > Searching the net shows others with the same issues > > but can't find a solution. > Start squid in debug mode as, > ./squid -NCd10 > what are you getting there? > Is your cache directory getting FULL? Check the > directory size. > ================================================== > Best Regards, > Squid Runner Support > squidrunner_dev at yahoo dot com > Web: http://geocities.com/squidrunner_dev/ > Support: runnersupport at gmail dot com > SquidRunner - An Automatic Squid Builder > ================================================== > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around
