Dear all I am sorry for the late reply due to some busy schedule ASim u are using ur uplink as a multilink dailup its ok. i have tried this with VSAT and it worked well at the 1 MB of downlink. now one suggestion to make ur uplink on a seprate machine. suppose the machine on which u run multilink dailup (up link ) has the ip 192.168.0.2 consult ur downlink provider. u must have some ips of the same range. i mean ur dvb has the ip 192.168.238.238 u must have at least one ip like 192.168.238.239 now if u are not using machine. give it to ur proxy. now u have the following scnerio 1) DVB 192.168.238.238 2) Proxy 192.168.238.239 3) one machine on which is connected to multilink dailup its ip is 192.168.0.2 now on ur lan give ur browser the proxy address 192.168.238.239 or run a trasparent proxy as u wish. and give the default gateway of ur lan machines as 192.168.0.2 thats all INSHALLAH it will work perfect hope for best. again sorry for late reply ; (in law it is said justice delayed justice denied) my number is +92-300-4378689 Kind Regards Muhammad Bilal Ahmad Network Eng. ICT Department WorldCALL Multimedia Pvt Ltd 16-S Gulberg II Lahore, Pakistan Off: 92 (42) 5877051-55 ----- Original Message ----- From: "asim hafeez" <asim.mcp@xxxxxxxxx> To: <mbilal@xxxxxxxxxxxxxxxx> Sent: Sunday, June 12, 2005 8:27 PM Subject: Re: [squid-users] how to > Dear Bilal Bhai. > > Actually I don't have any Hardware Base Router, neither i understood > what the rage of ips i should use (SORRY) Please Give me a brief Now i > tell you What all the hardware & Software i've. > > > 1. Dual Processor 733 Machine > 2. Windows 2000 Server. > > Right Now i've Running Microsoft ISA Server on this machine with dhcp > Recently I've got downlink so When i configured it with ISA server I > did not feel well , coze before downlink i was using multilink dialup > and this dialup was better than this downlinnk link so now i want to > migrate to Squid NT Proxy Server On Microsoft Windows 2000 Server. > Thats Why i want to do this.. > The Simple Configuration of Squid NT. (Simple means just with Dialup) > I know how to do this.. Now i know how to set it up with downlink and > the IP Class of C .. 192.168. I'll use with it... e.g. 192.168.0.1 > .... > Right now my dvb card is using 192.168.238.238 and Lan Adaptor > 192.168.0.1 . So How All I should do .. Just let me know how to use > these ips and where to do . Now i Think You'll Understnad What i want > to .. and Please If you don't mind Can you Please give me ur contact > Number. I'm sending you mine 0333-4634544 > > Best Regards > Asim Hafeez
