Am 22.03.22 um 10:34 schrieb Cong Liu:
qxl use ioremap to map ram_header and rom, in the arm64 implementation,
the device is mapped as DEVICE_nGnRE, it can not support unaligned
access.
Well that some ARM boards doesn't allow unaligned access to MMIO space
is a well known bug of those ARM boards.
So as far as I know this is a hardware bug you are trying to workaround
here and I'm not 100% sure that this is correct.
Christian.
6.620515] pc : setup_hw_slot+0x24/0x60 [qxl]
[ 6.620961] lr : setup_slot+0x34/0xf0 [qxl]
[ 6.621376] sp : ffff800012b73760
[ 6.621701] x29: ffff800012b73760 x28: 0000000000000001 x27: 0000000010000000
[ 6.622400] x26: 0000000000000001 x25: 0000000004000000 x24: ffffcf376848c000
[ 6.623099] x23: ffff0000c4087400 x22: ffffcf3718e17140 x21: 0000000000000000
[ 6.623823] x20: ffff0000c4086000 x19: ffff0000c40870b0 x18: 0000000000000014
[ 6.624519] x17: 000000004d3605ab x16: 00000000bb3b6129 x15: 000000006e771809
[ 6.625214] x14: 0000000000000001 x13: 007473696c5f7974 x12: 696e696666615f65
[ 6.625909] x11: 00000000d543656a x10: 0000000000000000 x9 : ffffcf3718e085a4
[ 6.626616] x8 : 00000000006c7871 x7 : 000000000000000a x6 : 0000000000000017
[ 6.627343] x5 : 0000000000001400 x4 : ffff800011f63400 x3 : 0000000014000000
[ 6.628047] x2 : 0000000000000000 x1 : ffff0000c40870b0 x0 : ffff0000c4086000
[ 6.628751] Call trace:
[ 6.628994] setup_hw_slot+0x24/0x60 [qxl]
[ 6.629404] setup_slot+0x34/0xf0 [qxl]
[ 6.629790] qxl_device_init+0x6f0/0x7f0 [qxl]
[ 6.630235] qxl_pci_probe+0xdc/0x1d0 [qxl]
[ 6.630654] local_pci_probe+0x48/0xb8
[ 6.631027] pci_device_probe+0x194/0x208
[ 6.631464] really_probe+0xd0/0x458
[ 6.631818] __driver_probe_device+0x124/0x1c0
[ 6.632256] driver_probe_device+0x48/0x130
[ 6.632669] __driver_attach+0xc4/0x1a8
[ 6.633049] bus_for_each_dev+0x78/0xd0
[ 6.633437] driver_attach+0x2c/0x38
[ 6.633789] bus_add_driver+0x154/0x248
[ 6.634168] driver_register+0x6c/0x128
[ 6.635205] __pci_register_driver+0x4c/0x58
[ 6.635628] qxl_init+0x48/0x1000 [qxl]
[ 6.636013] do_one_initcall+0x50/0x240
[ 6.636390] do_init_module+0x60/0x238
[ 6.636768] load_module+0x2458/0x2900
[ 6.637136] __do_sys_finit_module+0xbc/0x128
[ 6.637561] __arm64_sys_finit_module+0x28/0x38
[ 6.638004] invoke_syscall+0x74/0xf0
[ 6.638366] el0_svc_common.constprop.0+0x58/0x1a8
[ 6.638836] do_el0_svc+0x2c/0x90
[ 6.639216] el0_svc+0x40/0x190
[ 6.639526] el0t_64_sync_handler+0xb0/0xb8
[ 6.639934] el0t_64_sync+0x1a4/0x1a8
[ 6.640294] Code: 910003fd f9484804 f9400c23 8b050084 (f809c083)
[ 6.640889] ---[ end trace 95615d89b7c87f95 ]---
Signed-off-by: Cong Liu <liucong2@xxxxxxxxxx>
---
drivers/gpu/drm/qxl/qxl_kms.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/gpu/drm/qxl/qxl_kms.c b/drivers/gpu/drm/qxl/qxl_kms.c
index 4dc5ad13f12c..0e61ac04d8ad 100644
--- a/drivers/gpu/drm/qxl/qxl_kms.c
+++ b/drivers/gpu/drm/qxl/qxl_kms.c
@@ -165,7 +165,11 @@ int qxl_device_init(struct qxl_device *qdev,
(int)qdev->surfaceram_size / 1024,
(sb == 4) ? "64bit" : "32bit");
+#ifdef CONFIG_ARM64
+ qdev->rom = ioremap_cache(qdev->rom_base, qdev->rom_size);
+#else
qdev->rom = ioremap(qdev->rom_base, qdev->rom_size);
+#endif
if (!qdev->rom) {
pr_err("Unable to ioremap ROM\n");
r = -ENOMEM;
@@ -183,9 +187,15 @@ int qxl_device_init(struct qxl_device *qdev,
goto rom_unmap;
}
+#ifdef CONFIG_ARM64
+ qdev->ram_header = ioremap_cache(qdev->vram_base +
+ qdev->rom->ram_header_offset,
+ sizeof(*qdev->ram_header));
+#else
qdev->ram_header = ioremap(qdev->vram_base +
qdev->rom->ram_header_offset,
sizeof(*qdev->ram_header));
+#endif
if (!qdev->ram_header) {
DRM_ERROR("Unable to ioremap RAM header\n");
r = -ENOMEM;