Re: [PATCH v2 1/1] virtio-video: Add virtio video device specification

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Tomasz, Keiichi,

On Mittwoch, 8. Januar 2020 13:46:25 CET Tomasz Figa wrote:
> On Wed, Jan 8, 2020 at 9:15 PM Keiichi Watanabe <keiichiw@xxxxxxxxxxxx> 
wrote:
> > Hi Dmitry,
> > 
> > On Wed, Jan 8, 2020 at 7:00 PM Dmitry Sepp <dmitry.sepp@xxxxxxxxxxxxxxx> 
wrote:
> > > Hi Keiichi,
> > > 
> > > On Mittwoch, 8. Januar 2020 07:59:22 CET Keiichi Watanabe wrote:
> > > > Hi Dmitry,
> > > > 
> > > > On Wed, Jan 8, 2020 at 1:50 AM Dmitry Sepp
> > > > <dmitry.sepp@xxxxxxxxxxxxxxx>
> > > 
> > > wrote:
> > > > > Hi Keiichi,
> > > > > 
> > > > > thanks for the updates, please see my comments below.
> > > > > 
> > > > > On Dienstag, 7. Januar 2020 14:24:31 CET Keiichi Watanabe wrote:
> > > > > > Hi Dmitry,
> > > > > > 
> > > > > > On Mon, Jan 6, 2020 at 11:59 PM Dmitry Sepp
> > > > > > <dmitry.sepp@xxxxxxxxxxxxxxx>
> > > > > 
> > > > > wrote:
> > > > > > > Hi,
> > > > > > > 
> > > > > > > a couple of new comments:
> > > > > > > 
> > > > > > > On Mittwoch, 18. Dezember 2019 14:02:14 CET Keiichi Watanabe 
wrote:
> > > > > > > > From: Dmitry Sepp <dmitry.sepp@xxxxxxxxxxxxxxx>
> > > > > > > > 
> > > > > > > > The virtio video encoder device and decoder device provide
> > > > > > > > functionalities
> > > > > > > > to encode and decode video stream respectively.
> > > > > > > > Though video encoder and decoder are provided as different
> > > > > > > > devices,
> > > > > > > > they
> > > > > > > > use a same protocol.
> > > > > > > > 
> > > > > > > > Signed-off-by: Dmitry Sepp <dmitry.sepp@xxxxxxxxxxxxxxx>
> > > > > > > > Signed-off-by: Keiichi Watanabe <keiichiw@xxxxxxxxxxxx>
> > > > > > > > ---
> > > > > > > > 
> > > > > > > >  content.tex      |   1 +
> > > > > > > >  virtio-video.tex | 579
> > > > > > > >  +++++++++++++++++++++++++++++++++++++++++++++++
> > > > > > > >  2 files changed, 580 insertions(+)
> > > > > > > >  create mode 100644 virtio-video.tex
> > > > > > > > 
> > > > > > > > diff --git a/content.tex b/content.tex
> > > > > > > > index 556b373..9e56839 100644
> > > > > > > > --- a/content.tex
> > > > > > > > +++ b/content.tex
> > > > > > > > @@ -5743,6 +5743,7 @@ \subsubsection{Legacy Interface: Framing
> > > > > > > > Requirements}\label{sec:Device \input{virtio-vsock.tex}
> > > > > > > > 
> > > > > > > >  \input{virtio-fs.tex}
> > > > > > > >  \input{virtio-rpmb.tex}
> > > > > > > > 
> > > > > > > > +\input{virtio-video.tex}
> > > > > > > > 
> > > > > > > >  \chapter{Reserved Feature Bits}\label{sec:Reserved Feature
> > > > > > > >  Bits}
> > > > > > > > 
> > > > > > > > diff --git a/virtio-video.tex b/virtio-video.tex
> > > > > > > > new file mode 100644
> > > > > > > > index 0000000..30e728d
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/virtio-video.tex
> > > > > > > > @@ -0,0 +1,579 @@
> > > > > > > > +\section{Video Device}\label{sec:Device Types / Video Device}
> > > > > > > > +
> > > > > > > > +The virtio video encoder device and decoder device are
> > > > > > > > virtual
> > > > > > > > devices
> > > > > > > > that +supports encoding and decoding respectively. Though the
> > > > > > > > encoder
> > > > > > > > and the decoder +are different devices, they use the same
> > > > > > > > protocol.
> > > > > > > > +
> > > > > > > > +\subsection{Device ID}\label{sec:Device Types / Video Device
> > > > > > > > /
> > > > > > > > Device
> > > > > > > > ID}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[30] encoder device
> > > > > > > > +\item[31] decoder device
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\subsection{Virtqueues}\label{sec:Device Types / Video Device
> > > > > > > > /
> > > > > > > > Virtqueues} +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[0] controlq - queue for sending control commands.
> > > > > > > > +\item[1] eventq - queue for sending events happened in the
> > > > > > > > device.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\subsection{Feature bits}\label{sec:Device Types / Video
> > > > > > > > Device /
> > > > > > > > Feature
> > > > > > > > bits} +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[VIRTIO_VIDEO_F_RESOURCE_GUEST_PAGES (0)] Guest pages
> > > > > > > > can be
> > > > > > > > used
> > > > > > > > for
> > > > > > > > video +  buffers.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\devicenormative{\subsubsection}{Feature bits}{Device Types /
> > > > > > > > Video
> > > > > > > > Device
> > > > > > > > / Feature bits} +
> > > > > > > > +The device MUST offer at least one of feature bits.
> > > > > > > > +
> > > > > > > > +\subsection{Device configuration layout}\label{sec:Device
> > > > > > > > Types /
> > > > > > > > Video
> > > > > > > > Device / Device configuration layout} +
> > > > > > > > +Video device configuration uses the following layout
> > > > > > > > structure:
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_config {
> > > > > > > > +        le32 max_cap_len;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{max_cap_len}] defines the maximum length of a
> > > > > > > > descriptor
> > > > > > > > +  required to call VIRTIO_VIDEO_GET_CAPABILITY in bytes. The
> > > > > > > > device
> > > > > > > > +  MUST set this value.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\subsection{Device Initialization}\label{sec:Device Types /
> > > > > > > > Video
> > > > > > > > Device /
> > > > > > > > Device Initialization} +
> > > > > > > > +\devicenormative{\subsubsection}{Device
> > > > > > > > Initialization}{Device
> > > > > > > > Types /
> > > > > > > > Video Device / Device Initialization} +
> > > > > > > > +The driver SHOULD query device capability by using the
> > > > > > > > +VIRTIO_VIDEO_T_GET_CAPABILITY and use that information for
> > > > > > > > the
> > > > > > > > initial
> > > > > > > > +setup.
> > > > > > > > +
> > > > > > > > +\subsection{Device Operation}\label{sec:Device Types / Video
> > > > > > > > Device
> > > > > > > > /
> > > > > > > > Device Operation} +
> > > > > > > > +The driver allocates input and output buffers and queues the
> > > > > > > > buffers
> > > > > > > > +to the device. The device performs operations on the buffers
> > > > > > > > according
> > > > > > > > +to the function in question.
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Create stream}
> > > > > > > > +
> > > > > > > > +To process buffers, the device needs to associate them with a
> > > > > > > > certain
> > > > > > > > +video stream (essentially, a context). Streams are created by
> > > > > > > > +VIRTIO_VIDEO_T_STREAM_CREATE with a default set of parameters
> > > > > > > > +determined by the device.
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Create buffers}
> > > > > > > > +
> > > > > > > > +Buffers are used to store the actual data as well as the
> > > > > > > > relevant
> > > > > > > > +metadata. Scatter lists are supported, so the buffer doesn't
> > > > > > > > need
> > > > > > > > to
> > > > > > > > +be contiguous in guest physical memory.
> > > > > > > > +
> > > > > > > > +\begin{itemize*}
> > > > > > > > +\item Use VIRTIO_VIDEO_T_RESOURCE_CREATE to create a virtio
> > > > > > > > video
> > > > > > > > +  resource that is backed by a buffer allocated from the
> > > > > > > > driver's
> > > > > > > > +  memory.
> > > > > > > > +\item Use VIRTIO_VIDEO_T_RESOURCE_DESTROY to destroy a
> > > > > > > > resource
> > > > > > > > that
> > > > > > > > +  is no longer needed.
> > > > > > > > +\end{itemize*}
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Stream parameter control}
> > > > > > > > +
> > > > > > > > +\begin{itemize*}
> > > > > > > > +\item Use VIRTIO_VIDEO_T_GET_PARAMS to get the current stream
> > > > > > > > parameters
> > > > > > > > for +  input and output streams from the device.
> > > > > > > > +\item Use VIRTIO_VIDEO_T_SET_PARAMS to provide new stream
> > > > > > > > parameters to
> > > > > > > > the +  device.
> > > > > > > > +\item After setting stream parameters, the driver may issue
> > > > > > > > +  VIRTIO_VIDEO_T_GET_PARAMS as some parameters of both input
> > > > > > > > and
> > > > > > > > output
> > > > > > > > can be +  changed implicitly by the device during the set
> > > > > > > > operation.
> > > > > > > > +\end{itemize*}
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Process buffers}
> > > > > > > > +
> > > > > > > > +\begin{itemize*}
> > > > > > > > +\item If the function and the buffer type require so, write
> > > > > > > > data to
> > > > > > > > +the buffer memory.
> > > > > > > > +\item Use VIRTIO_VIDEO_T_RESOURCE_QUEUE to queue the buffer
> > > > > > > > for
> > > > > > > > +processing in the device.
> > > > > > > > +\item The request completes asynchronously when the device
> > > > > > > > has
> > > > > > > > +finished with the buffer.
> > > > > > > > +\end{itemize*}
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Buffer processing control}
> > > > > > > > +
> > > > > > > > +\begin{itemize*}
> > > > > > > > +\item Use VIRTIO_VIDEO_T_STREAM_DRAIN to ask the device to
> > > > > > > > process
> > > > > > > > and
> > > > > > > > +  return all of the already queued buffers.
> > > > > > > > +\item Use VIRTIO_VIDEO_T_QUEUE_CLEAR to ask the device to
> > > > > > > > return
> > > > > > > > back
> > > > > > > > +  already queued buffers from the input or the output queue.
> > > > > > > > This
> > > > > > > > also
> > > > > > > > +  includes input or output buffers that can be currently
> > > > > > > > owned by
> > > > > > > > the
> > > > > > > > +  device's processing pipeline.
> > > > > > > > +\end{itemize*}
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Asynchronous events}
> > > > > > > > +
> > > > > > > > +While processing buffers, the device can send asynchronous
> > > > > > > > event
> > > > > > > > +notifications to the driver. The behaviour depends on the
> > > > > > > > exact
> > > > > > > > +stream. For example, the decoder device sends a resolution
> > > > > > > > change
> > > > > > > > +event when it encounters new resolution metadata in the
> > > > > > > > stream.
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: Request header}
> > > > > > > > +
> > > > > > > > +All requests and responses on the control virt queue have a
> > > > > > > > fixed
> > > > > > > > +header using the following layout structure and definitions:
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +enum virtio_video_ctrl_type {
> > > > > > > > +        VIRTIO_VIDEO_CTRL_UNDEFINED = 0,
> > > > > > > > +
> > > > > > > > +        /* request */
> > > > > > > > +        VIRTIO_VIDEO_T_GET_CAPABILITY = 0x0100,
> > > > > > > > +        VIRTIO_VIDEO_T_STREAM_CREATE,
> > > > > > > > +        VIRTIO_VIDEO_T_STREAM_DESTROY,
> > > > > > > > +        VIRTIO_VIDEO_T_STREAM_DRAIN,
> > > > > > > > +        VIRTIO_VIDEO_T_RESOURCE_CREATE,
> > > > > > > > +        VIRTIO_VIDEO_T_RESOURCE_DESTROY,
> > > > > > > > +        VIRTIO_VIDEO_T_RESOURCE_QUEUE,
> > > > > > > > +        VIRTIO_VIDEO_T_QUEUE_CLEAR,
> > > > > > > > +        VIRTIO_VIDEO_T_SET_PARAMS,
> > > > > > > > +        VIRTIO_VIDEO_T_GET_PARAMS,
> > > > > > > > +
> > > > > > > > +        /* response */
> > > > > > > > +        VIRTIO_VIDEO_S_OK = 0x0200,
> > > > > > > > +        VIRTIO_VIDEO_S_OK_RESOURCE_QUEUE,
> > > > > > > > +        VIRTIO_VIDEO_S_OK_GET_PARAMS,
> > > > > > > > +
> > > > > > > > +        VIRTIO_VIDEO_S_ERR_UNSPEC = 0x0300,
> > > > > > > > +        VIRTIO_VIDEO_S_ERR_OUT_OF_MEMORY,
> > > > > > > > +        VIRTIO_VIDEO_S_ERR_INVALID_RESOURCE_ID,
> > > > > > > > +        VIRTIO_VIDEO_S_ERR_INVALID_STREAM_ID,
> > > > > > > > +        VIRTIO_VIDEO_S_ERR_INVALID_PARAMETER,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_ctrl_hdr {
> > > > > > > > +        le32 type;
> > > > > > > > +        le32 stream_id;
> > > > > > > > +        le32 len; /* Length of the structure in bytes. */
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{type}] is the type of the driver request or the
> > > > > > > > device
> > > > > > > > +response.
> > > > > > > > +\item[\field{stream_id}] specifies a target stream.
> > > > > > > > +\item[\field{len}] is the length of data in bytes, which
> > > > > > > > includes
> > > > > > > > +length of the header.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: controlq}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_GET_CAPABILITY] Retrieve information
> > > > > > > > about
> > > > > > > > +supported formats.
> > > > > > > > +
> > > > > > > > +The driver uses \field{struct virtio_video_get_capability} to
> > > > > > > > send
> > > > > > > > a
> > > > > > > > +query request.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +enum virtio_video_buf_type {
> > > > > > > > +        VIRTIO_VIDEO_BUF_TYPE_INPUT,
> > > > > > > > +        VIRTIO_VIDEO_BUF_TYPE_OUTPUT,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_get_capability {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        enum virtio_video_buf_type buf_type;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{buf_type}] is the buffer type that the driver
> > > > > > > > asks
> > > > > > > > +information about. The driver MUST set either
> > > > > > > > +\field{VIRTIO_VIDEO_BUF_TYPE_INPUT} or
> > > > > > > > \field{VIRTIO_VIDEO_BUF_TYPE_OUTPUT}. +\end{description}
> > > > > > > > +
> > > > > > > > +The device responds a capability by using \field{struct
> > > > > > > > +virtio_video_get_capability_resp}.
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +enum virtio_video_format {
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_UNDEFINED = 0,
> > > > > > > > +        /* Raw formats */
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_NV12 = 1,
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_YUV420,
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_YVU420,
> > > > > > > > +
> > > > > > > > +        /* Compressed formats */
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_H264 = 0x1001,
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_VP8 =  0x1002,
> > > > > > > > +        VIRTIO_VIDEO_FORMAT_VP9 =  0x1003,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +enum virtio_video_profile {
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_UNDEFINED = 0,
> > > > > > > > +
> > > > > > > > +        /* H.264 */
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_MIN = 0x100,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_BASELINE =
> > > > > > > > VIRTIO_VIDEO_PROFILE_H264_BASELINE, +
> > > > > > > > VIRTIO_VIDEO_PROFILE_H264_MAIN,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_EXTENDED,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_HIGH,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_HIGH10PROFILE,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_HIGH422PROFILE,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_HIGH444PREDICTIVEPROFILE,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_SCALABLEBASELINE,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_SCALABLEHIGH,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_STEREOHIGH,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_MULTIVIEWHIGH,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_H264_MAX =
> > > > > > > > VIRTIO_VIDEO_PROFILE_H264_MULTIVIEWHIGH, +
> > > > > > > > +        /* VP8 */
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP8_MIN = 0x200,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP8_ANY =
> > > > > > > > VIRTIO_VIDEO_PROFILE_VP8_MIN,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP8_MAX =
> > > > > > > > VIRTIO_VIDEO_PROFILE_VP8_ANY,
> > > > > > > > +
> > > > > > > > +        /* VP9 */
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP9_MIN = 0x300,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP9_PROFILE0 =
> > > > > > > > VIRTIO_VIDEO_PROFILE_VP9_MIN,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP9_PROFILE1,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP9_PROFILE2,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP9_PROFILE3,
> > > > > > > > +        VIRTIO_VIDEO_PROFILE_VP9_MAX =
> > > > > > > > VIRTIO_VIDEO_PROFILE_VP9_PROFILE3,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_format_range {
> > > > > > > > +        le32 min;
> > > > > > > > +        le32 max;
> > > > > > > > +        le32 step;
> > > > > > > > +        u8 paddings[4];
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_format_desc {
> > > > > > > > +        le32 format;  /* One of VIRTIO_VIDEO_FORMAT_* types
> > > > > > > > */
> > > > > > > > +        le32 profile; /* One of VIRTIO_VIDEO_PROFILE_* types
> > > > > > > > */
> > > > > > > > +        le64 mask;
> > > > > > > > +        struct virtio_video_format_range width;
> > > > > > > > +        struct virtio_video_format_range height;
> > > > > > > > +        le32 num_rates;
> > > > > > > > +        u8 padding[4];
> > > > > > > > +        /* Followed by struct virtio_video_frame_rate
> > > > > > > > frame_rates[]
> > > > > > > > */
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_get_capability_resp {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 num_descs;
> > > > > > > > +        /* Followed by struct virtio_video_format_desc desc[]
> > > > > > > > */
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +The format description \field{struct
> > > > > > > > virtio_video_format_desc}
> > > > > > > > +includes the following fields:
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{format}] specifies an image format. The device
> > > > > > > > MUST
> > > > > > > > set
> > > > > > > > one
> > > > > > > > +  of \field{enum virtio_video_format}.
> > > > > > > > +\item[\field{profile}] specifies a profile of the compressed
> > > > > > > > image
> > > > > > > > format
> > > > > > > > +  specified in \field{format}. The driver SHOULD ignore this
> > > > > > > > value
> > > > > > > > if
> > > > > > > > +  \field{format} is a raw format.
> > > > > > > 
> > > > > > > So how should this be used? The spec does not define any way to
> > > > > > > set
> > > > > > > profile for the device. It is very important for encoder.
> > > > > > 
> > > > > > Thank you for pointing this.
> > > > > > These points are overlooked, as I didn't care about encoder usage
> > > > > > enough.
> > > > > > 
> > > > > > After thinking it again, I think it's not a very good idea to
> > > > > > include
> > > > > > supported profiles and levels in a struct for capability.
> > > > > > This is because these values are available only for limited number
> > > > > > of
> > > > > > formats. Also, it's true that we need to have a way to set these
> > > > > > values
> > > > > > as
> > > > > > Dmitry pointed.
> > > > > 
> > > > > Yes, you are right. In fact, the approach of the v1 spec to keep
> > > > > controls
> > > > > separately was not correct.
> > > > > 
> > > > > > Instead, it would make more sense to have additional three types
> > > > > > of
> > > > > > controls for profiles, levels, and bitrates:
> > > > > > (1) QUERY_CONTROL: Query values supported by the device
> > > > > > (2) GET_CONTROL: Read a value that is set in the device
> > > > > > (3) SET_CONTROL: Set a value in the device
> > > > > > 
> > > > > > These operations are similar to V4L2 controls.
> > > > > > (1), (2) and (3) would correspond VIDIOC_QUERY{CTRL,MENU}, S_CTRL,
> > > > > > and
> > > > > > G_CTRL in V4L2, respectively.
> > > > > > Also, (3) would be similar to enum virtio_video_control_type in
> > > > > > the
> > > > > > virtio-video v1 driver implementation in
> > > > > > https://markmail.org/message/dwghwdqsbl3gsjxu .
> > > > > > 
> > > > > > For QUERY_CONTROL, my idea is like this:
> > > > > > 
> > > > > > enum virtio_video_control_type {
> > > > > > 
> > > > > >   VIRTIO_VIDEO_CONTROL_UNDEFINED = 0,
> > > > > >   
> > > > > >   VIRTIO_VIDEO_CONTROL_BITRATE = 0x100,
> > > > > >   VIRTIO_VIDEO_CONTROL_PROFILE,
> > > > > >   VIRTIO_VIDEO_CONTROL_LEVEL,
> > > > > > 
> > > > > > };
> > > > > > 
> > > > > > struct virtio_video_query_control {
> > > > > > 
> > > > > >   struct virtio_video_ctrl_hdr hdr;
> > > > > >   le32 control; /* One of VIRTIO_VIDEO_CONTROL_* types */
> > > > > >   le32 length;
> > > > > >   /* Followed by additional data.
> > > > > >   
> > > > > >    * If |control| is VIRTIO_VIDEO_CONTROL_PROFILE,
> > > > > >    * the device must pass a codec format like H264 or VP9.
> > > > > >    * The requred data must be defined in the specification.
> > > > > >    */
> > > > > > 
> > > > > > };
> > > > > > 
> > > > > > struct virtio_video_query_control_resp {
> > > > > > 
> > > > > >   struct virtio_video_ctrl_hdr hdr;
> > > > > >   le32 length;
> > > > > >   u8 padding[4];
> > > > > >   /* Followed by data corresponds to the specified control.
> > > > > >   
> > > > > >    * The type of data must be defined in the spec.
> > > > > >    * For example, if the driver queries profiles, this part should
> > > > > >    be
> > > > > >    * an array of supported profiles of a given format.
> > > > > >    */
> > > > > > 
> > > > > > };
> > > > > > 
> > > > > > WDYT?
> > > > > 
> > > > > I think virtio_video_control_type should make sense. But I would
> > > > > disagree
> > > > > with the need to have new QUERY_CONTROL and GET_CONTROL.
> > > > > 
> > > > > I assume the set of supported controls is fixed for some particular
> > > > > format
> > > > > on a given IP. So we'd propose to include controls into format
> > > > > descriptors, so we don't need to QUERY_CONTROL. This way (with
> > > > > 'virtio_video_format_list') we can define not-contiguos ranges, e.g.
> > > > > for
> > > > > profiles.
> > > > > 
> > > > > struct virtio_video_format_frame {
> > > > > 
> > > > >         /* As proposed in Keiichi's prev email */
> > > > > 
> > > > > };
> > > > > 
> > > > > virtio_video_format_list {
> > > > > 
> > > > >         le32 num_entries;
> > > > >         u8 padding[4];
> > > > >         /* Followed by le64 entries[] */
> > > > > 
> > > > > };
> > > > > 
> > > > > struct virtio_video_format_control {
> > > > > 
> > > > >         le32 type;
> > > > >         u8 padding[4];
> > > > >         struct virtio_video_format_list values;
> > > > > 
> > > > > };
> > > > > 
> > > > > struct virtio_video_format_desc {
> > > > > 
> > > > >         le64 mask;
> > > > >         le32 format; /* One of VIRTIO_VIDEO_FORMAT_* types */
> > > > >         le32 planes_layout; /* See the thread [v2 0/1] */
> > > > >         le32 num_frames;
> > > > >         le32 num_controls;
> > > > >         /* Followed by struct virtio_video_format_frame frames[] */
> > > > >         /* Followed by struct virtio_video_format_control controls[]
> > > > >         */
> > > > > 
> > > > > };
> > > > 
> > > > In my understanding, a set of supported levels depends on a profile.
> > > > H.264 spec says that levels are specified within each profile.
> > > > cf. "0.5 Profiles and levels" in
> > > > https://www.itu.int/rec/T-REC-H.264-201906-I/en (V4L2's QUERYMENU
> > > > doesn't
> > > > seem to provide a way to query levels for each profile properly,
> > > > though)
> > > > 
> > > > So, if we want to have supported profiles and levels in format_desc as
> > > > your idea, each supported profile should have a list of supported
> > > > levels.
> > > > I suppose it makes the structure of video_format_desc too complicated.
> > > > I'd like to avoid this complexity caused by some specific formats.
> > > > 
> > > > Instead, I'd like to keep virtio_video_format_desc minimal and have
> > > > QUERY_CONTROL to query format-specific values like profiles and
> > > > levels.
> > > > This design would make it easy to extend controls when we want to
> > > > support new types of formats. We will just need to define new
> > > > VIRTIO_VIDEO_CONTROL_*.
> > > > What do you think?
> > > 
> > > Yes, I think we can keep it this way, this indeed provides more
> > > flexibility and this way we won't need to modify the 'format' parsing
> > > logic when more controls are added.
> > 
> > Thanks! I'm preparing the next version of the patch.
> > 
> > I have one concern about terminology.
> > We have two different things called "controls" now:
> > 1) Messages passed via controlq. i.e. "ctrl" in 'enum
> > virtio_video_ctrl_type' and 'virtio_video_ctrl_hdr'.
> > 2) Commands for profiles, levels, and bitrates similar to V4L2
> > controls. e.g.., "CONTROL" in VIRTIO_VIDEO_CONTROL_*
> > 
> > I feel calling both "controls" is somewhat confusing and I am
> > wondering if we can't rename either of them.
> > 
> > For example, how about renaming 2) to "command"? Then, we'll have
> > {QUERY ,GET, SET}_COMMAND.
> > It may sound strange, though.
> > Do you have any idea?
> 
> "Command" sound like executing an action, but in this context we're
> thinking more about parameters or, exactly, controls. The term
> "control" is not limited to V4L2 and actually used in other subsystems
> as well, for example the Android Camera HAL.
> 
> How about renaming 1) to "commandq" and then having the other symbols
> use the abbreviated "cmd"?

First I thought about renaming 'virtio_video_ctrl_hdr' to 
'virtio_video_req_hdr', but then 'reqq' wouldn't look nice.

So I'd be ok to go with 'commandq' and 'cmd'.

T is for type, S is for status. I was looking at the virtio-iommu spec around 
that time, I think I derived it from there.

Regards,
Dmitry

> 
> Best regards,
> Tomasz
> 
> > Best regards,
> > Keiichi
> > 
> > > Best regards,
> > > Dmitry.
> > > 
> > > > Best regards,
> > > > Keiichi
> > > > 
> > > > > SET_CONTROL seems to be mandatory. If it succeeds, we can store the
> > > > > current
> > > > > value locally, so there is no need to have GET_CONTROL.
> > > > > 
> > > > > The only exception is the initial (default) control value in the
> > > > > device.
> > > > > But with the removal of 'function' and with addition of 'caps'
> > > > > instead,
> > > > > the way to provide defaults is gone. So I suppose for formats we'll
> > > > > be
> > > > > just using GET on driver start to get the 'defaults'. But the thing
> > > > > is
> > > > > that for formats there are other uses for GET, but for controls GET
> > > > > apparently does not make to much sense at runtime.
> > > > > 
> > > > > > > Also, shouldn't the profile come together with level? Would make
> > > > > > > sense
> > > > > > > for
> > > > > > > encoders.
> > > > > > 
> > > > > > Yeah. So, in the above idea of QUERY_CONTROL, profile should be
> > > > > > required when querying supported levels.
> > > > > 
> > > > > So probably should be enumerated together, not queried, as per the
> > > > > comment
> > > > > above.
> > > > > 
> > > > > > > > +\item[\field{mask}] is a bitset that represents the supported
> > > > > > > > +  combination of input and output format. If \textit{i}-th
> > > > > > > > bit is
> > > > > > > > set
> > > > > > > > +  in \field{mask} of \textit{j}-th \field{struct
> > > > > > > > +  virtio_video_format_desc} for input, the device supports
> > > > > > > > encoding
> > > > > > > > or
> > > > > > > > +  decoding from the \textit{j}-th input format to
> > > > > > > > \textit{i}-th
> > > > > > > > output
> > > > > > > > +  format.
> > > > > > > > +\item[\field{width, height}] represents a range of
> > > > > > > > resolutions
> > > > > > > > +  supported by the device. If its \field{step} is not
> > > > > > > > applicable,
> > > > > > > > its
> > > > > > > > +  \field{min} is equal to its \field{max}.
> > > > > > > > +\item[\field{num_rates}] is the length of an array
> > > > > > > > \field{frame_rates}.
> > > > > > > > In
> > > > > > > > case of decoder, the driver SHOULD ignore this value.
> > > > > > > > +\item[\field{frame_rates}] is an array of supported frame
> > > > > > > > rates.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > 
> > > > > > > I'd guess frame rates depend on the resolution as well. This
> > > > > > > dependency
> > > > > > > was
> > > > > > > clear in the v1 spec, but in the v2 there is no dependency
> > > > > > > anymore. I
> > > > > > > think we need to update this.
> > > > > > 
> > > > > > That's a good point. I missed that dependency when updating the
> > > > > > structures.
> > > > > > So, let me update the structs like the following:
> > > > > > 
> > > > > > struct virtio_video_format_frame {
> > > > > > 
> > > > > >         struct virtio_video_format_range width;
> > > > > >         struct virtio_video_format_range height;
> > > > > >         le32 num_rates;
> > > > > >         u8 padding[4];
> > > > > >         /* Followed by struct virtio_video_format_range
> > > > > >         frame_rates[] */
> > > > > > 
> > > > > > };
> > > > > > 
> > > > > > struct virtio_video_format_desc {
> > > > > > 
> > > > > >         le64 mask;
> > > > > >         le32 format; /* One of VIRTIO_VIDEO_FORMAT_* types */
> > > > > >         le32 planes_layout; /* See the thread [v2 0/1] */
> > > > > >         le32 num_frames;
> > > > > >         u8 padding[4];
> > > > > >         /* Followed by struct virtio_video_format_frame frames[]
> > > > > >         */
> > > > > > 
> > > > > > };
> > > > > 
> > > > > Yes, I do agree with this approach.
> > > > > 
> > > > > Best regards,
> > > > > Dmitry.
> > > > > 
> > > > > > Best regards,
> > > > > > Keiichi.
> > > > > > 
> > > > > > > Best regards,
> > > > > > > Dmitry.
> > > > > > > 
> > > > > > > > +\item[VIRTIO_VIDEO_T_STREAM_CREATE] create a video stream
> > > > > > > > (context)
> > > > > > > > +  within the device.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +enum virtio_video_mem_type {
> > > > > > > > +        VIRTIO_VIDEO_MEM_TYPE_GUEST_PAGES,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_stream_create {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 in_mem_type;  /* One of VIRTIO_VIDEO_MEM_TYPE_*
> > > > > > > > types
> > > > > > > > */
> > > > > > > > +        le32 out_mem_type; /* One of VIRTIO_VIDEO_MEM_TYPE_*
> > > > > > > > types
> > > > > > > > */
> > > > > > > > +        char debug_name[64];
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{in_mem_type}] is a type of buffer management for
> > > > > > > > input
> > > > > > > > +buffers. The driver MUST set a value in \field{enum
> > > > > > > > +virtio_video_mem_type}.
> > > > > > > > +\item[\field{out_mem_type}] is a type of buffer management
> > > > > > > > for
> > > > > > > > output
> > > > > > > > +buffers. The driver MUST set a value in \field{enum
> > > > > > > > +virtio_video_mem_type}.
> > > > > > > > +\item[\field{debug_name}] is a text string for a debug
> > > > > > > > purpose.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_STREAM_DESTROY] destroy a video stream
> > > > > > > > (context)
> > > > > > > > +  within the device.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_stream_destroy {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_STREAM_DRAIN] ask the device to push all
> > > > > > > > the
> > > > > > > > +  queued buffers through the pipeline.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_stream_drain {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_RESOURCE_CREATE] create a resource
> > > > > > > > descriptor
> > > > > > > > +  within the device.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_mem_entry {
> > > > > > > > +        le64 addr;
> > > > > > > > +        le32 length;
> > > > > > > > +        u8 padding[4];
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_resource_create {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 resource_id;
> > > > > > > > +        le32 nr_entries;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{resource_id}] internal id of the resource.
> > > > > > > > +\item[\field{nr_entries}] number of \field{struct
> > > > > > > > +  virtio_video_mem_entry} memory entries.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_RESOURCE_DESTROY] destroy a resource
> > > > > > > > descriptor
> > > > > > > > +  within the device.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_resource_destroy {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 resource_id;
> > > > > > > > +        u8 padding[4];
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{resource_id}] internal id of the resource.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_RESOURCE_QUEUE] Add a buffer to the
> > > > > > > > device's
> > > > > > > > +queue.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +#define VIRTIO_VIDEO_MAX_PLANES 8
> > > > > > > > +
> > > > > > > > +struct virtio_video_resource_queue {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 buf_type;
> > > > > > > > +        le32 resource_id;
> > > > > > > > +        le64 timestamp;
> > > > > > > > +        le32 nr_data_size;
> > > > > > > > +        le32 data_size[VIRTIO_VIDEO_MAX_PLANES];
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{buf_type}] buf_type of the .
> > > > > > > > +\item[\field{resource_id}] internal id of the resource.
> > > > > > > > +\item[\field{timestamp}] an abstract sequence counter that
> > > > > > > > can be
> > > > > > > > used
> > > > > > > > +  for synchronisation.
> > > > > > > > +\item[\field{nr_data_size}] number of \field{data_size}
> > > > > > > > entries.
> > > > > > > > +\item[\field{data_size}] number of data bytes within a plane.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +enum virtio_video_buffer_flag {
> > > > > > > > +        VIRTIO_VIDEO_BUFFER_F_ERR        = 0x0001,
> > > > > > > > +        VIRTIO_VIDEO_BUFFER_F_EOS        = 0x0002,
> > > > > > > > +        /* Encoder only */
> > > > > > > > +        VIRTIO_VIDEO_BUFFER_IFRAME        = 0x0004,
> > > > > > > > +        VIRTIO_VIDEO_BUFFER_PFRAME        = 0x0008,
> > > > > > > > +        VIRTIO_VIDEO_BUFFER_BFRAME        = 0x0010,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_resource_queue_resp {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le64 timestamp;
> > > > > > > > +        le32 flags; /* One of VIRTIO_VIDEO_BUFFER_* flags */
> > > > > > > > +        le32 size;  /* Encoded size */
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{timestamp}] an abstract sequence counter that
> > > > > > > > can be
> > > > > > > > used
> > > > > > > > +  for synchronisation.
> > > > > > > > +\item[\field{flags}] mark specific buffers in the sequence.
> > > > > > > > +\item[\field{size}] data size in the buffer (encoder only).
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +The device sends a response to the queue request
> > > > > > > > asynchronously
> > > > > > > > when
> > > > > > > > +it has finished processing the buffer.
> > > > > > > > +
> > > > > > > > +The device SHOULD mark a buffer that triggered a processing
> > > > > > > > error
> > > > > > > > with
> > > > > > > > +the VIRTIO_VIDEO_BUFFER_F_ERR flag.
> > > > > > > > +
> > > > > > > > +The device MUST mark the last buffer with the
> > > > > > > > +VIRTIO_VIDEO_BUFFER_F_EOS flag to denote completion of the
> > > > > > > > drain
> > > > > > > > +sequence.
> > > > > > > > +
> > > > > > > > +In case of encoder, to denote a particular frame type the
> > > > > > > > devie
> > > > > > > > MUST
> > > > > > > > +mark the respective buffer with VIRTIO_VIDEO_BUFFER_IFRAME,
> > > > > > > > +VIRTIO_VIDEO_BUFFER_PFRAME, VIRTIO_VIDEO_BUFFER_BFRAME.
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_RESOURCE_QUEUE_CLEAR] Return already
> > > > > > > > queued
> > > > > > > > +  buffers back from the input or the output queue of the
> > > > > > > > device.
> > > > > > > > The
> > > > > > > > +  device SHOULD return all of the buffers from the respective
> > > > > > > > queue
> > > > > > > > as
> > > > > > > > +  soon as possible without pushing the buffers through the
> > > > > > > > processing
> > > > > > > > +  pipeline.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_queue_clear {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 buf_type;
> > > > > > > > +        u8 padding[4];
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{buf_type}] buffer type.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_GET_PARAMS] Get parameters of the input
> > > > > > > > or the
> > > > > > > > +  output of a stream.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_plane_format {
> > > > > > > > +        le32 plane_size;
> > > > > > > > +        le32 stride;
> > > > > > > > +        u8 padding[4];
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{plane_size}] size of the plane in bytes.
> > > > > > > > +\item[\field{stride}] stride used for the plane in bytes.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_params {
> > > > > > > > +        le32 buf_type; /* One of VIRTIO_VIDEO_BUF_TYPE_*
> > > > > > > > types */
> > > > > > > > +        le32 fourcc;   /* One of VIRTIO_VIDEO_FOURCC_* types
> > > > > > > > */
> > > > > > > > +        le32 frame_width;
> > > > > > > > +        le32 frame_height;
> > > > > > > > +        le32 min_buffers;
> > > > > > > > +        le32 max_buffers;
> > > > > > > > +        le32 frame_rate;
> > > > > > > > +        struct virtio_video_crop {
> > > > > > > > +                le32 left;
> > > > > > > > +                le32 top;
> > > > > > > > +                le32 width;
> > > > > > > > +                le32 height;
> > > > > > > > +        } crop;
> > > > > > > > +        le32 num_planes;
> > > > > > > > +        struct virtio_video_plane_format
> > > > > > > > plane_formats[VIRTIO_VIDEO_MAX_PLANES]; +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{frame_width}] the value to get/set.
> > > > > > > > +\item[\field{frame_height}] the value to get/set.
> > > > > > > > +\item[\field{pixel_format}] the value to get/set.
> > > > > > > > +\item[\field{min_buffers}] minimum buffers required to handle
> > > > > > > > the
> > > > > > > > +  format (r/o).
> > > > > > > > +\item[\field{max_buffers}] maximum buffers required to handle
> > > > > > > > the
> > > > > > > > +  format (r/o).
> > > > > > > > +\item[\field{frame_rate}] the value to get/set.
> > > > > > > > +\item[\field{crop}] cropping (composing) rectangle.
> > > > > > > > +\item[\field{num_planes}] number of planes used to store
> > > > > > > > pixel data
> > > > > > > > +(r/o).
> > > > > > > > +\item[\field{plane_formats}] description of each plane.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_get_params {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        le32 buf_type; /* One of VIRTIO_VIDEO_BUF_TYPE_*
> > > > > > > > types */
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_get_params_resp {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        struct virtio_video_params params;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{buf_type}] buffer type.
> > > > > > > > +\item[\field{params}] parameter values.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\item[VIRTIO_VIDEO_T_SET_PARAMS] Change parameters of a
> > > > > > > > stream.
> > > > > > > > +
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +struct virtio_video_set_params {
> > > > > > > > +        struct virtio_video_ctrl_hdr hdr;
> > > > > > > > +        struct virtio_video_params params;
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{params}] parameters to set.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +Setting stream parameters might have side effects within the
> > > > > > > > device.
> > > > > > > > +For example, the device MAY perform alignment of width and
> > > > > > > > height,
> > > > > > > > +change the number of planes it uses for the format, or do
> > > > > > > > whatever
> > > > > > > > +changes that are required to continue normal operation using
> > > > > > > > the
> > > > > > > > +updated parameters. It is up to the driver to check the
> > > > > > > > parameter
> > > > > > > > set
> > > > > > > > +after the VIRTIO_VIDEO_T_SET_PARAMS request has been issued.
> > > > > > > > +
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +\subsubsection{Device Operation: eventq}
> > > > > > > > +
> > > > > > > > +The device can report events on the event queue. The driver
> > > > > > > > initially
> > > > > > > > +populates the queue with device-writeable buffers. When the
> > > > > > > > device
> > > > > > > > +needs to report an event, it fills a buffer and notifies the
> > > > > > > > driver.
> > > > > > > > +The driver consumes the report and adds a new buffer to the
> > > > > > > > virtqueue.
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +enum virtio_video_event_type {
> > > > > > > > +        VIRTIO_VIDEO_EVENT_T_UNDEFINED = 0,
> > > > > > > > +        /* For all functions */
> > > > > > > > +        VIRTIO_VIDEO_EVENT_T_ERROR_UNSPEC = 0x0100,
> > > > > > > > +        /* For decoder only */
> > > > > > > > +        VIRTIO_VIDEO_EVENT_T_DECODER_RESOLUTION_CHANGED =
> > > > > > > > 0x0200,
> > > > > > > > +};
> > > > > > > > +
> > > > > > > > +struct virtio_video_event {
> > > > > > > > +        le32 event_type; /* One of VIRTIO_VIDEO_EVENT_T_*
> > > > > > > > types */
> > > > > > > > +        le32 stream_id;
> > > > > > > > +        u8 padding[4];
> > > > > > > > +};
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +\begin{description}
> > > > > > > > +\item[\field{event_type}] type of the triggered event .
> > > > > > > > +\item[\field{stream_id}] id of the source stream.
> > > > > > > > +\end{description}
> > > > > > > > +
> > > > > > > > +The device MUST send
> > > > > > > > VIRTIO_VIDEO_EVENT_T_DECODER_RESOLUTION_CHANGED
> > > > > > > > +whenever it encounters new resolution data in the stream.
> > > > > > > > This
> > > > > > > > +includes the case of the initial device configuration after
> > > > > > > > metadata
> > > > > > > > +has been parsed and the case of dynamic resolution change.



_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/spice-devel



[Index of Archives]     [Linux Virtualization]     [Linux Virtualization]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]     [Monitors]