[PATCH spice-server] spice_protocol: Update many names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Using an old "renames" file found in spice-protocol repository
I update some old names in the documentation protocol.
Also updated some other names manually.
I processed the file and fixed some code indentation.
File looks much more up to date.

Signed-off-by: Frediano Ziglio <fziglio@xxxxxxxxxx>
---
 docs/spice_protocol.txt | 808 ++++++++++++++++++++--------------------
 1 file changed, 404 insertions(+), 404 deletions(-)

diff --git a/docs/spice_protocol.txt b/docs/spice_protocol.txt
index 58bc01664..d191462d1 100644
--- a/docs/spice_protocol.txt
+++ b/docs/spice_protocol.txt
@@ -51,10 +51,10 @@ is in little endian format.
 .. UINT32 – 32 bits unsigned  integer
 .. INT32 - 32 bits signed integer
 .. UINT64 – 64 bits unsigned  integer
-.. ADDRESS - 64 bits unsigned integer, value is the offset of the addressed
+.. SPICE_ADDRESS - 64 bits unsigned integer, value is the offset of the addressed
 data from the beginning of spice protocol message body (i.e., data following
-RedDataHeader or RedSubMessage).
-.. FIXED28_4 – 32 bits fixed point number. 28 high bits are signed integer. Low
+SpiceDataHeader or SpicedSubMessage).
+.. SPICE_FIXED28_4 – 32 bits fixed point number. 28 high bits are signed integer. Low
 4 bits is unsigned integer numerator of a fraction with denominator 16.
 .. POINT
 +
@@ -75,12 +75,12 @@ INT32 right +
 +
 .. POINTFIX
 +
-FIXED28_4 x +
-FIXED28_4 y +
+SPICE_FIXED28_4 x +
+SPICE_FIXED28_4 y +
 +
 . Protocol Magic number UINT8[4]
 +
-RED_MAGIC = { 0x52, 0x45, 0x44,  0x51}
+SPICE_MAGIC = { 0x52, 0x45, 0x44,  0x51}
 +
 . Protocol version
 +
@@ -97,8 +97,8 @@ compatibility. It is  set to zero on  major protocol version increment.
 +
 [source,c]
 ----
-RED_VERSION_MAJOR = 1
-RED_VERSION_MINOR = 0
+SPICE_VERSION_MAJOR = 1
+SPICE_VERSION_MINOR = 0
 ----
 +
 . Compatibility – UINT32[]
@@ -117,49 +117,49 @@ expressed using one or more bits in the compatibilities vector.
 +
 [source,c]
 ----
-RED_CHANNEL_MAIN 	= 1
-RED_CHANNEL_DISPLAY 	= 2
-RED_CHANNEL_INPUTS 	= 3
-RED_CHANNEL_CURSOR 	= 4
-RED_CHANNEL_PLAYBACK 	= 5
-RED_CHANNEL_RECORD 	= 6
+SPICE_CHANNEL_MAIN 	= 1
+SPICE_CHANNEL_DISPLAY 	= 2
+SPICE_CHANNEL_INPUTS 	= 3
+SPICE_CHANNEL_CURSOR 	= 4
+SPICE_CHANNEL_PLAYBACK 	= 5
+SPICE_CHANNEL_RECORD 	= 6
 ----
 +
 . Error codes UINT32
 +
 [source,c]
 ----
-RED_ERROR_OK 				= 0
-RED_ERROR_ERROR				= 1
-RED_ERROR_INVALID_MAGIC			= 2
-RED_ERROR_INVALID_DATA			= 3
-RED_ERROR_VERSION_MISMATCH		= 4
-RED_ERROR_NEED_SECURED			= 5
-RED_ERROR_NEED_UNSECURED		= 6
-RED_ERROR_PERMISSION_DENIED		= 7
-RED_ERROR_BAD_CONNECTION_ID		= 8
-RED_ERROR_CHANNEL_NOT_AVAILABLE		= 9
+SPICE_LINK_ERR_OK 			= 0
+SPICE_LINK_ERR_ERROR			= 1
+SPICE_LINK_ERR_INVALID_MAGIC		= 2
+SPICE_LINK_ERR_INVALID_DATA		= 3
+SPICE_LINK_ERR_VERSION_MISMATCH		= 4
+SPICE_LINK_ERR_NEED_SECURED		= 5
+SPICE_LINK_ERR_NEED_UNSECURED		= 6
+SPICE_LINK_ERR_PERMISSION_DENIED	= 7
+SPICE_LINK_ERR_BAD_CONNECTION_ID	= 8
+SPICE_LINK_ERR_CHANNEL_NOT_AVAILABLE	= 9
 ----
 +
 . Warning codes
 +
 [source,c]
 ----
-RED_WARN_GENERAL 				= 0
+SPICE_WARN_GENERAL 				= 0
 ----
 +
 . Information codes
 +
 [source,c]
 ----
-RED_INFO_GENERAL				= 0
+SPICE_INFO_GENERAL				= 0
 ----
 +
 . public key buffer size.
 +
 [source,c]
 ----
-RED_TICKET_PUBKEY_BYTES = 162 /* size needed for holding 1024 bit RSA public
+SPICE_TICKET_PUBKEY_BYTES = 162 /* size needed for holding 1024 bit RSA public
 key in X.509 SubjectPublicKeyInfo format. */
 ----
 +
@@ -168,16 +168,16 @@ key in X.509 SubjectPublicKeyInfo format. */
 .. Connection process
 +
 The channel connection process is initiated by the client. The client sends
-RedLinkMess. In response, the server sends RedLinkReply. When the client
-receives  RedLinkReply, it examines the error code and in case there is no
-error it encrypts its password with public key received in RedLinkReply and
+SpiceLinkMess. In response, the server sends SpiceLinkReply. When the client
+receives  SpiceLinkReply, it examines the error code and in case there is no
+error it encrypts its password with public key received in SpiceLinkReply and
 sends it to the server. The server receive the password and sends the link
 result to the client. The client examines the link result, and in case the
-result equals to RED_ERROR_OK, a valid connection is established.
+result equals to SPICE_LINK_ERR_OK, a valid connection is established.
 +
-Channel connection for channel types other then RED_CHANNEL_MAIN is allowed
-only after the client has active RED_CHANNEL_MAIN channel connection.  Only one
-RED_CHANNEL_MAIN connection is allowed, and this channel connection establishes
+Channel connection for channel types other then SPICE_CHANNEL_MAIN is allowed
+only after the client has active SPICE_CHANNEL_MAIN channel connection.  Only one
+SPICE_CHANNEL_MAIN connection is allowed, and this channel connection establishes
 spice session with the remote server.
 +
 .. Ticketing
@@ -188,33 +188,33 @@ server consisting of a password and time validity. After time validity passes,
 the whole ticket is expired. The ticket is encrypted. To encrypt, server
 generates a 1024 bit RSA key and send the public part to the client (via
 RedLinkInfo). Client uses this key to encrypt the password and send it back to
-server (after RedLinkMess). Server decrypt the password, compare it to ticket
+server (after SpiceLinkMess). Server decrypt the password, compare it to ticket
 and ensure it was received within the allowed time-frame.
 +
-.. RedLinkMess definition.
+.. SpiceLinkMess definition.
 +
 [source,c]
 ----
 UINT32 magic
 ----
 +
-value of this fields must be equal to RED_MAGIC
+value of this fields must be equal to SPICE_MAGIC
 +
 [cols="2*"]
 |===
 |UINT32 major_version
-| value of this fields must be equal to RED_VERSION_MAJOR
+| value of this fields must be equal to SPICE_VERSION_MAJOR
 
 |UINT32 minor_version
-|value of this fields must be equal to RED_VERSION_MINOR
+|value of this fields must be equal to SPICE_VERSION_MINOR
 
 |UINT32 size
 |number of bytes following this field to the end of this message.
 
 |UINT32 connection_id
-|In case of a new session (i.e., channel type is RED_CHANNEL_MAIN) this field
+|In case of a new session (i.e., channel type is SPICE_CHANNEL_MAIN) this field
 is set to zero, and in response the server will allocate session id and will
-send it via the RedLinkReply message. In case of all other channel types, this
+send it via the SpiceLinkReply message. In case of all other channel types, this
 field will be equal to the allocated session id.
 
 |UINT8 channel_type
@@ -235,12 +235,12 @@ type.
 from the “ size” member (i.e., from the address of the “connection_id” member).
 |===
 +
-.. RedLinkReply  definition
+.. SpiceLinkReply  definition
 +
 [cols="2*"]
 |===
 |UINT32 magic
-|value of this field must be equal to RED_MAGIC
+|value of this field must be equal to SPICE_MAGIC
 
 |UINT32 major_version
 |server major protocol version.
@@ -252,9 +252,9 @@ from the “ size” member (i.e., from the address of the “connection_id” m
 |number of bytes following this field to the end of this message.
 
 |UINT32  error
-|Error codes (i.e., RED_ERROR_?)
+|Error codes (i.e., SPICE_LINK_ERR_?)
 
-|UINT8[RED_TICKET_PUBKEY_BYTES]  pub_key
+|UINT8[SPICE_TICKET_PUBKEY_BYTES]  pub_key
 |1024 bit RSA public key in X.509 SubjectPublicKeyInfo format.
 
 |UINT32 num_common_caps
@@ -272,20 +272,20 @@ the “connection_id” member)
 .. Encrypted Password
 +
 Client sends RSA encrypted password, with public key received from server (in
-RedLinkReply). Format is EME-OAEP as described in PKCS#1 v2.0 with SHA-1, MGF1
+SpiceLinkReply). Format is EME-OAEP as described in PKCS#1 v2.0 with SHA-1, MGF1
 and an empty encoding parameter.
 +
 .. Link Result UINT32
 +
-The server sends link result error code (i.e., RED_ERROR_?)
+The server sends link result error code (i.e., SPICE_LINK_ERR_?)
 +
 . Protocol message definition
 +
 All messages transmitted after the link stage have a common message layout. It
-begins with RedDataHeader which describes one main message and an optional sub
+begins with SpiceDataHeader which describes one main message and an optional sub
 messages list.
 +
-.. RedDataHeader
+.. SpiceDataHeader
 +
 [cols="2*"]
 |===
@@ -294,22 +294,22 @@ messages list.
 value of 1 and are incremented on every message transmitted.
 
 |UINT16 type
-|message type can be one that is  accepted by all channel (e.g., RED_MIGRATE),
-or specific to a channel type (e.g., RED_DISPLAY_MODE for display channel).
+|message type can be one that is  accepted by all channel (e.g., SPICE_MSG_MIGRATE),
+or specific to a channel type (e.g., SPICE_MSG_DISPLAY_MODE for display channel).
 
 |UINT32 size
 |size of the message body in bytes. In case sub_list (see below) is not zero
 then the actual main message size is sub_list. The message body follows
-RedDataHeader
+SpiceDataHeader
 
 |UINT32  sub_list
 |optional sub-messages list. If this field is not zero then sub_list is the
-offset in bytes to RedSubMessageList from the end of RedDataHeader.  All
+offset in bytes to SpiceSubMessageList from the end of SpiceDataHeader.  All
 sub-messages need to be executed before the main message, and in the order they
 appear in the sub-messageslist.
 |===
 +
-.. RedSubMessageList
+.. SpiceSubMessageList
 +
 [cols="2*"]
 |===
@@ -318,19 +318,19 @@ appear in the sub-messageslist.
 
 |UINT32[]  sub_messages
 |array of offsets to sub message, offset is number of bytes from the end of
-RedDataHeader to start of RedSubMessage.
+SpiceDataHeader to start of SpicedSubMessage.
 |===
 +
-.. RedSubMessage
+.. SpicedSubMessage
 +
 [cols="2*"]
 |===
 |UINT16  type
-|message type can be one that is  accepted by all channel (e.g., RED_MIGRATE),
-or specific to a channel type (e.g., RED_DISPLAY_MODE for display channel).
+|message type can be one that is  accepted by all channel (e.g., SPICE_MSG_MIGRATE),
+or specific to a channel type (e.g., SPICE_MSG_DISPLAY_MODE for display channel).
 
 |UINT32 size
-|size of the message body in bytes.  The message body follows RedSubMessage.
+|size of the message body in bytes.  The message body follows SpicedSubMessage.
 |===
 +
 . Common messages and messaging naming convention
@@ -344,83 +344,83 @@ client the prefixes are REDC and Redc.
 +
 [source,c]
 ----
-RED_MIGRATE 			= 1
-RED_MIGRATE_DATA		= 2
-RED_SET_ACK			= 3
-RED_PING			= 4
-RED_WAIT_FOR_CHANNELS		= 5
-RED_DISCONNECTING		= 6
-RED_NOTIFY			= 7
+SPICE_MSG_MIGRATE 		= 1
+SPICE_MSG_MIGRATE_DATA		= 2
+SPICE_MSG_SET_ACK		= 3
+SPICE_MSG_PING			= 4
+SPICE_MSG_WAIT_FOR_CHANNELS	= 5
+SPICE_MSG_DISCONNECTING		= 6
+SPICE_MSG_NOTIFY		= 7
 
-RED_FIRST_AVAIL_MESSAGE 	= 101
+SPICE_MSG_FIRST_AVAIL 	= 101
 ----
 +
-Specific channel server messages start from RED_FIRST_AVAIL_MESSAGE. All
-message types from RED_NOTIFY + 1 to RED_FIRST_AVAIL_MESSAGE – 1 are reserved
+Specific channel server messages start from SPICE_MSG_FIRST_AVAIL. All
+message types from SPICE_MSG_NOTIFY + 1 to SPICE_MSG_FIRST_AVAIL – 1 are reserved
 for further use.
 +
 . Client messages that are common to all channels
 +
 [source,c]
 ----
-REDC_ACK_SYNC				= 1
-REDC_ACK				= 2
-REDC_PONG				= 3
-REDC_MIGRATE_FLUSH_MARK			= 4
-REDC_MIGRATE_DATA			= 5
-REDC_DISCONNECTING			= 6
+SPICE_MSGC_ACK_SYNC			= 1
+SPICE_MSGC_ACK				= 2
+SPICE_MSGC_PONG				= 3
+SPICE_MSGC_MIGRATE_FLUSH_MARK		= 4
+SPICE_MSGC_MIGRATE_DATA			= 5
+SPICE_MSGC_DISCONNECTING		= 6
 
-REDC_FIRST_AVAIL_MESSAGE		= 101
+SPICE_MSGC_FIRST_AVAIL		= 101
 ----
 +
-Specific channel client messages start from REDC_FIRST_AVAIL_MESSAGE. All
-message types from REDC_ACK_SYNC+ 1 to REDC_FIRST_AVAIL_MESSAGE – 1 are
+Specific channel client messages start from SPICE_MSGC_FIRST_AVAIL. All
+message types from SPICE_MSGC_ACK_SYNC+ 1 to SPICE_MSGC_FIRST_AVAIL – 1 are
 reserved for further use.
 +
 . Messages acknowledgment.
 +
 Spice provides a set of messages for requesting an acknowledgment on every one
 or more messages that the client consumes. In order to request acknowledgment
-messages, the server sends  RED_SET_ACK with the requested acknowledgment
+messages, the server sends  SPICE_MSG_SET_ACK with the requested acknowledgment
 frequency – after how many received messages the client sends acknowledgment. .
-In response, the client sends  REDC_ACK_SYNC. From this point, for every
-requested number of messages that the client receive, it will send  a REDC_ACK
+In response, the client sends  SPICE_MSGC_ACK_SYNC. From this point, for every
+requested number of messages that the client receive, it will send  a SPICE_MSGC_ACK
 message.
 +
-.. RED_SET_ACK, RedSetAck
+.. SPICE_MSG_SET_ACK, SpiceMsgSetAck
 +
 [cols="2*"]
 |===
 |UINT32 generation
 |the generation of the acknowledgment sequence. This value will be sent back by
-REDC_ACK_SYNC. It is used for acknowledgment accounting synchronization.
+SPICE_MSGC_ACK_SYNC. It is used for acknowledgment accounting synchronization.
 
 |UINT32 window
 |the window size. Spice client will send acknowledgment for every “window”
 messages.  Zero window size will disable  messages acknowledgment.
 |===
 +
-.. REDC_ACK_SYNC, UINT32
+.. SPICE_MSGC_ACK_SYNC, UINT32
 +
 [cols="2*"]
 |===
 |UINT32
-|Spice client sends  RedSetAck.generation in response to RED_SET_ACK
+|Spice client sends  SpiceMsgSetAck.generation in response to SPICE_MSG_SET_ACK
 |===
 +
-.. REDC_ACK, VOID
+.. SPICE_MSGC_ACK, VOID
 +
-Spice client sends  REDC_ACK message for every RedSetAck.window messages it
+Spice client sends  SPICE_MSGC_ACK message for every SpiceMsgSetAck.window messages it
 consumes.
 +
 . Ping
 +
 Spice protocol provides ping messages for debugging purpose. Spice server sends
-RED_PING and the client responses with REDC_PONG. The server can measure round
+SPICE_MSG_PING and the client responses with SPICE_MSGC_PONG. The server can measure round
 trip time by subtracting current time with the time that is returned in
-REDC_PONG message.
+SPICE_MSGC_PONG message.
 +
-.. RED_PING, RedPing
+.. SPICE_MSG_PING, SpiceMsgPing
 +
 [cols="2*"]
 |===
@@ -431,15 +431,15 @@ REDC_PONG message.
 |time stamp of this message
 |===
 +
-.. REDC_PONG, RedPong
+.. SPICE_MSGC_PONG, RedPong
 +
 [cols="2*"]
 |===
 |UINT32 id
-|Spice client copies it from RedPing.id
+|Spice client copies it from SpiceMsgPing.id
 
 |UINT64 time
-|Spice client copies it from RedPing.time
+|Spice client copies it from SpiceMsgPing.time
 |===
 +
 . Channel migration
@@ -450,33 +450,33 @@ connections between spice servers. We will refer these servers as source and
 destination. Main channel is used for initiating and controlling the migration
 process. The following describes the actual channel migration process.
 +
-Channel migration process starts with sending RED_MIGRATE message from the
+Channel migration process starts with sending SPICE_MSG_MIGRATE message from the
 server. The client receives the message, examine the attached flags and: if the
-server requests messages flush (i.e., RED_MIGRATE_NEED_FLUSH flag is on), the
-client sends REDC_MIGRATE_FLUSH_MARK message to the server. This procedure can
+server requests messages flush (i.e., SPICE_MIGRATE_NEED_FLUSH flag is on), the
+client sends SPICE_MSGC_MIGRATE_FLUSH_MARK message to the server. This procedure can
 be used to ensure safe delivery of all mid air messages before performing the
 migration action.  if the server requests data transfer (i.e.,
-RED_MIGRATE_NEED_DATA_TRANSFER flag is on), the client expects to receive one
+SPICE_MIGRATE_NEED_DATA_TRANSFER flag is on), the client expects to receive one
 last message from the server before migrating to destination. This message type
-must be RED_MIGRATE_DATA type. The content of the received message will be
+must be SPICE_MSG_MIGRATE_DATA type. The content of the received message will be
 transmitted to the destination on connection swap.
 +
 Afterward, the client swaps communication channels (i.e., starts using the
 connection with the destination server). The client can close connection with
 the source server only after all other channels also have finished the
 migration process. If the server side has requested data transfer, the client
-first transmits REDC_MIGRATE_DATA message containing the data received on
-RED_MIGRATE_DATA.
+first transmits SPICE_MSGC_MIGRATE_DATA message containing the data received on
+SPICE_MSG_MIGRATE_DATA.
 +
 .. Migration flags
 +
 [source,c]
 ----
-RED_MIGRATE_NEED_FLUSH 			= 1
-RED_MIGRATE_NEED_DATA_TRANSFER 		= 2
+SPICE_MIGRATE_NEED_FLUSH 			= 1
+SPICE_MIGRATE_NEED_DATA_TRANSFER 		= 2
 ----
 +
-.. RED_MIGRATE, RedMigrate
+.. SPICE_MSG_MIGRATE, SpiceMsgMigrate
 +
 [cols="2*"]
 |===
@@ -484,51 +484,51 @@ RED_MIGRATE_NEED_DATA_TRANSFER 		= 2
 |combination of red migration flags.
 |===
 +
-... RED_MIGRATE_DATA, UINT8[]
+... SPICE_MSG_MIGRATE_DATA, UINT8[]
 +
 Server migrate data, body of this message is variable length raw data that is
 determined by each channel type independently
 +
-... REDC_MIGRATE_FLUSH_MARK, VOID
+... SPICE_MSGC_MIGRATE_FLUSH_MARK, VOID
 +
 This messages mark completion of client communication channel flushing.
 +
-.. REDC_MIGRATE_DATA, UINT8[]
+.. SPICE_MSGC_MIGRATE_DATA, UINT8[]
 +
 Post migration data, sent by client to the destination, containing the data
-sent by the source using the RED_MIGRATE_DATA message.
+sent by the source using the SPICE_MSG_MIGRATE_DATA message.
 +
 [[channel_sync]]
 . Channel synchronization
 +
 Spice provides mechanism for synchronizing channels message execution on the
-client side. The server sends RED_WAIT_FOR_CHANNELS message which contains a
-list of channels messages to wait for (i.e., RedWaitForChannels). The Spice
+client side. The server sends SPICE_MSG_WAIT_FOR_CHANNELS message which contains a
+list of channels messages to wait for (i.e., SpiceMsgWaitForChannels). The Spice
 client will wait for completion of all the messages that are in that list
 before executing any more messages.
 +
-.. RedWaitForChannel
+.. SpiceWaitForChannel
 +
 [cols="2*"]
 |===
 |UINT8 type
-|channel type (e.g., RED_CHANNEL_INPUTS)
+|channel type (e.g., SPICE_CHANNEL_INPUTS)
 
 |UINT8 id
 |channel id.
 
 |UIN64 serial
-|message serial id (i.e, RedDataHeader.serial) to wait for
+|message serial id (i.e, SpiceDataHeader.serial) to wait for
 |===
 +
-... RED_WAIT_FOR_CHANNELS, RedWaitForChannels
+... SPICE_MSG_WAIT_FOR_CHANNELS, SpiceMsgWaitForChannels
 +
 [cols="2*"]
 |===
 |UINT8 wait_count
 |number of items in wait_list
 
-|RedWaitForChannel[] wait_list
+|SpiceWaitForChannel[] wait_list
 |list of channels to wait for.
 |===
 +
@@ -537,7 +537,7 @@ before executing any more messages.
 The following messages are used for notification about orderly disconnection
 of the server or client.
 +
-.. RED_DISCONNECTING, RedDisconnect
+.. SPICE_MSG_DISCONNECTING, SpiceMsgDisconnect
 +
 [cols="2*"]
 |===
@@ -545,10 +545,10 @@ of the server or client.
 |time stamp of disconnect action on the server.
 
 |UINT32 reason
-|disconnect reason, RED_ERROR_?
+|disconnect reason, SPICE_LINK_ERR_?
 |===
 +
-.. REDC_DISCONNECTING, RedcDisconnect
+.. SPICE_MSGC_DISCONNECTING, RedcDisconnect
 +
 [cols="2*"]
 |===
@@ -556,18 +556,18 @@ of the server or client.
 |time stamp of disconnect action on the client.
 
 |UINT32 reason
-|disconnect reason, RED_ERROR_?
+|disconnect reason, SPICE_LINK_ERR_?
 |===
 +
 . Server notification
 +
 Spice protocol defines message for delivering notifications to the client using
-RED_NOTIFY message. Messages are categorized by severity and visibility. The
+SPICE_MSG_NOTIFY message. Messages are categorized by severity and visibility. The
 later can be used as hint for the way the message is displayed to the user. For
 example high visibility notifications will trigger message box and low
 visibility notifications will be directed to the log.
 +
-.. RED_NOTIFY, RedNotify
+.. SPICE_MSG_NOTIFY, SpiceMsgNotify
 +
 [cols="2*"]
 |===
@@ -581,7 +581,7 @@ visibility notifications will be directed to the log.
 |one of  RED_NOTIFY_VISIBILITY_?
 
 |UINT32 what
-|one of RED_ERROR_?, RED_WARN_? Or RED_INFO_?, depending on severity.
+|one of SPICE_LINK_ERR_?, RED_WARN_? Or RED_INFO_?, depending on severity.
 
 |UINT32 message_len
 |size of message
@@ -638,7 +638,7 @@ receives REDC_MAIN_MIGRATE_READY he can commence the migration process. The
 server can send RED_MAIN_MIGRATE_CANCEL in order to instruct the client to
 cancel the migration process.
 +
-.. RED_MAIN_MIGRATE_BEGIN, RedMigrationBegin
+.. RED_MAIN_MIGRATE_BEGIN, SpiceMsgMainMigrationBegin
 +
 [cols="2*"]
 |===
@@ -677,11 +677,11 @@ position and shape commands. Spice main channel is used for mouse mode control.
 +
 [source,c]
 ----
-RED_MOUSE_MODE_SERVER = 1
-RED_MOUSE_MODE_CLIENT = 2
+SPICE_MOUSE_MODE_SERVER = 1
+SPICE_MOUSE_MODE_CLIENT = 2
 ----
 +
-.. RED_MAIN_MOUSE_MODE, RedMouseMode
+.. RED_MAIN_MOUSE_MODE, SpiceMsgMainMouseMode
 +
 Spice server sends this message on every mouse mode change
 +
@@ -698,7 +698,7 @@ Spice server sends this message on every mouse mode change
 +
 Spice client sends this message to request specific mouse mode. It is not
 guarantied that the server will accept the request. Only on receiving
-RED_MOUSE_MODE message, the client can know of actual mouse mode change.
+SPICE_MSG_MAIN_MOUSE_MODE message, the client can know of actual mouse mode change.
 +
 [cols="2*"]
 |===
@@ -708,16 +708,16 @@ RED_MOUSE_MODE message, the client can know of actual mouse mode change.
 +
 . Main channel init message
 +
-Spice server must send RedInit as the first transmitted message t and is
+Spice server must send SpiceMsgMainInit as the first transmitted message t and is
 disallowed to send it at any other point.
 +
-.. RED_MAIN_INIT, RedInit
+.. RED_MAIN_INIT, SpiceMsgMainInit
 +
 [cols="2*"]
 |===
 |UINT32 session_id
 |session id is generated by the server. This id will be send on every new
-channel connection within this session (i.e., in RedLinkMess.connection_id).
+channel connection within this session (i.e., in SpiceLinkMess.connection_id).
 
 |UINT32 display_channels_hint
 |optional hint of expected number of display channels. Zero is defined as an
@@ -755,7 +755,7 @@ message the client can decide to link with the new available channel(s). The
 server must receive REDC_MAIN_ATTACH_CHANNELS before sending any
 RED_MAIN_CHANNELS_LIST message.
 +
-.. RED_MAIN_CHANNELS_LIST, RedChannels
+.. RED_MAIN_CHANNELS_LIST, SpiceMsgChannels
 +
 [cols="2*"]
 |===
@@ -771,7 +771,7 @@ RED_MAIN_CHANNELS_LIST message.
 [cols="2*"]
 |===
 |UINT8 type
-|channel type, one of RED_CHANNEL_? channel types, except for RED_CHANNEL_MAIN
+|channel type, one of RED_CHANNEL_? channel types, except for SPICE_CHANNEL_MAIN
 
 |UINT8 id
 |channel id
@@ -853,14 +853,14 @@ messages having unknown type (i.e., receive and dump).
 [cols="2*"]
 |===
 |UINT32
-|disconnect error code RED_ERROR_?
+|disconnect error code SPICE_LINK_ERR_?
 |===
 +
-.. RED_AGENT_MAX_DATA_SIZE = 2048
+.. SPICE_AGENT_MAX_DATA_SIZE = 2048
 .. RED_MAIN_AGENT_DATA, UINT8[]
 +
-Agent packet is the entire message body (i.e. RedDataHeader.size). The maximum
-packet size is RED_AGENT_MAX_DATA_SIZE.
+Agent packet is the entire message body (i.e. SpiceDataHeader.size). The maximum
+packet size is SPICE_AGENT_MAX_DATA_SIZE.
 +
 .. RED_MAIN_AGENT_TOKEN, UINT32
 +
@@ -880,8 +880,8 @@ packet size is RED_AGENT_MAX_DATA_SIZE.
 +
 .. REDC_MAIN_AGENT_DATA, UINT8[]
 +
-Agent packet is the entire message body (i.e. RedDataHeader.size). The maximum
-packet size is RED_AGENT_MAX_DATA_SIZE.
+Agent packet is the entire message body (i.e. SpiceDataHeader.size). The maximum
+packet size is SPICE_AGENT_MAX_DATA_SIZE.
 +
 .. REDC_MAIN_AGENT_TOKEN, UINT32
 +
@@ -899,35 +899,35 @@ Spice Inputs channel controls the server mouse and the keyboard.
 +
 [source,c]
 ----
-REDC_INPUTS_KEY_DOWN 		= 101
-REDC_INPUTS_KEY_UP 		= 102
-REDC_INPUTS_KEY_MODIFAIERS 	= 103
+SPICE_MSGC_INPUTS_KEY_DOWN 		= 101
+SPICE_MSGC_INPUTS_KEY_UP 		= 102
+SPICE_MSGC_INPUTS_KEY_MODIFIERS 	= 103
 
-REDC_INPUTS_MOUSE_MOTION 	= 111
-REDC_INPUTS_MOUSE_POSITION	= 112
-REDC_INPUTS_MOUSE_PRESS		= 113
-REDC_INPUTS_MOUSE_RELEASE	= 114
+SPICE_MSGC_INPUTS_MOUSE_MOTION 		= 111
+SPICE_MSGC_INPUTS_MOUSE_POSITION	= 112
+SPICE_MSGC_INPUTS_MOUSE_PRESS		= 113
+SPICE_MSGC_INPUTS_MOUSE_RELEASE		= 114
 ----
 +
 . Server Messages
 +
 [source,c]
 ----
-RED_INPUTS_INIT 		= 101
-RED_INPUTS_KEY_MODIFAIERS 	= 102
+SPICE_MSG_INPUTS_INIT 			= 101
+SPICE_MSG_INPUTS_KEY_MODIFIERS 		= 102
 
-RED_INPUTS_MOUSE_MOTION_ACK 	= 111
+SPICE_MSG_INPUTS_MOUSE_MOTION_ACK 	= 111
 ----
 +
 . Keyboard messages
 +
 Spice supports sending keyboard key events and keyboard leds synchronization.
-The client sends  key event using REDC_INPUTS_KEY_DOWN and REDC_INPUTS_KEY_UP
+The client sends  key event using SPICE_MSGC_INPUTS_KEY_DOWN and SPICE_MSGC_INPUTS_KEY_UP
 messages. Key value is expressed using PC AT scan code (see
 <<key_code,KeyCode>>).   Keyboard leds synchronization is done by sending
-RED_INPUTS_KEY_MODIFAIERS message by the server or by sending
-REDC_INPUTS_KEY_MODIFAIERS by the client, these messages contain keyboard leds
-state. Keyboard modifiers is also sent by the server using RED_INPUTS_INIT,
+SPICE_MSG_INPUTS_KEY_MODIFIERS message by the server or by sending
+SPICE_MSGC_INPUTS_KEY_MODIFIERS by the client, these messages contain keyboard leds
+state. Keyboard modifiers is also sent by the server using SPICE_MSG_INPUTS_INIT,
 this message must be sent as the first server message and the server mustn't
 send it  at any other point.
 +
@@ -935,12 +935,12 @@ send it  at any other point.
 +
 [source,c]
 ----
-RED_SCROLL_LOCK_MODIFIER 	= 1
-RED_NUM_LOCK_MODIFIER 		= 2
-RED_CAPS_LOCK_MODIFIER 		= 4
+SPICE_SCROLL_LOCK_MODIFIER 	= 1
+SPICE_NUM_LOCK_MODIFIER 	= 2
+SPICE_CAPS_LOCK_MODIFIER 	= 4
 ----
 +
-.. RED_INPUTS_INIT, UINT32
+.. SPICE_MSG_INPUTS_INIT, UINT32
 +
 [cols="2*"]
 |===
@@ -948,7 +948,7 @@ RED_CAPS_LOCK_MODIFIER 		= 4
 |any combination of keyboard led bits. If bit is set then the led is on.
 |===
 +
-.. RED_INPUTS_KEY_MODIFAIERS, UINT32
+.. SPICE_MSG_INPUTS_KEY_MODIFIERS, UINT32
 +
 [cols="2*"]
 |===
@@ -956,7 +956,7 @@ RED_CAPS_LOCK_MODIFIER 		= 4
 |any combination of keyboard led bits. If bit is set then the led is on.
 |===
 +
-.. REDC_INPUTS_KEY_MODIFAIERS, UINT32
+.. SPICE_MSGC_INPUTS_KEY_MODIFIERS, UINT32
 +
 [cols="2*"]
 |===
@@ -974,7 +974,7 @@ RED_CAPS_LOCK_MODIFIER 		= 4
 bytes for supporting extended codes. A code is terminated by a zero byte.
 |===
 +
-.. REDC_INPUTS_KEY_DOWN, KeyCode
+.. SPICE_MSGC_INPUTS_KEY_DOWN, KeyCode
 +
 [cols="2*"]
 |===
@@ -982,7 +982,7 @@ bytes for supporting extended codes. A code is terminated by a zero byte.
 |client sends this message to notify of key press event.
 |===
 +
-.. REDC_INPUTS_KEY_UP,  KeyCode
+.. SPICE_MSGC_INPUTS_KEY_UP,  KeyCode
 +
 KeyCode – client sends this message to notify of key release event.
 +
@@ -1005,30 +1005,30 @@ and redc_inputs_mouse_release messages.
 +
 [source,c]
 ----
-REDC_MOUSE_LBUTTON 	= 1, left button
-REDC_MOUSE_MBUTTON 	= 2, middle button
-REDC_MOUSE_RBUTTON 	= 3, right button
-REDC_MOUSE_UBUTTON 	= 4, scroll up button
-REDC_MOUSE_DBUTTON 	= 5, scroll down button
+SPICE_MOUSE_BUTTON_LEFT 	= 1, left button
+SPICE_MOUSE_BUTTON_MIDDLE 	= 2, middle button
+SPICE_MOUSE_BUTTON_RIGHT 	= 3, right button
+SPICE_MOUSE_BUTTON_UP 		= 4, scroll up button
+SPICE_MOUSE_BUTTON_DOWN 	= 5, scroll down button
 ----
 +
 .. Buttons masks
 +
 [source,c]
 ----
-REDC_LBUTTON_MASK 		= 1,  left button mask
-REDC_MBUTTON_MASK 		= 2,  middle button mask
-REDC_RBUTTON_MASK 		= 4, right button mask
+SPICE_MOUSE_BUTTON_MASK_LEFT 		= 1,  left button mask
+SPICE_MOUSE_BUTTON_MASK_MIDDLE 		= 2,  middle button mask
+SPICE_MOUSE_BUTTON_MASK_RIGHT 		= 4, right button mask
 ----
 +
-.. RED_MOTION_ACK_BUNCH
+.. SPICE_INPUT_MOTION_ACK_BUNCH
 +
 [source,c]
 ----
-RED_MOTION_ACK_BUNCH		= 4
+SPICE_INPUT_MOTION_ACK_BUNCH		= 4
 ----
 +
-.. REDC_INPUTS_MOUSE_MOTION, RedcMouseMotion
+.. SPICE_MSGC_INPUTS_MOUSE_MOTION, SpiceMsgcMouseMotion
 +
 [cols="2*"]
 |===
@@ -1044,7 +1044,7 @@ describe unpressed button.
 
 |===
 +
-.. REDC_INPUTS_MOUSE_POSITION, RedcMousePosition
+.. SPICE_MSGC_INPUTS_MOUSE_POSITION, SpiceMsgcMousePosition
 +
 [cols="2*"]
 |===
@@ -1062,7 +1062,7 @@ describe unpressed button.
 |id of the display that client mouse is on.
 |===
 +
-.. REDC_INPUTS_MOUSE_PRESS, RedcMousePress
+.. SPICE_MSGC_INPUTS_MOUSE_PRESS, SpiceMsgcMousePress
 +
 [cols="2*"]
 |===
@@ -1074,7 +1074,7 @@ describe unpressed button.
 bit describes unpressed button.
 |===
 +
-.. REDC_INPUTS_MOUSE_RELEASE, RedcMouseRelease
+.. SPICE_MSGC_INPUTS_MOUSE_RELEASE, SpiceMsgcMouseRelease
 +
 [cols="2*"]
 |===
@@ -1098,75 +1098,75 @@ supports several images compression methods for reducing network traffic.
 +
 [source,c]
 ----
-RED_DISPLAY_MODE 				= 101
-RED_DISPLAY_MARK 				= 102
-RED_DISPLAY_RESET 				= 103
-RED_DISPLAY_COPY_BITS 				= 104
+SPICE_MSG_DISPLAY_MODE 				= 101
+SPICE_MSG_DISPLAY_MARK 				= 102
+SPICE_MSG_DISPLAY_RESET 			= 103
+SPICE_MSG_DISPLAY_COPY_BITS 			= 104
 
-RED_DISPLAY_INVAL_LIST 				= 105
-RED_DISPLAY_INVAL_ALL_IMAGES		 	= 106
-RED_DISPLAY_INVAL_PALETTE 			= 107
-RED_DISPLAY_INVAL_ALL_PALETTES 			= 108
+SPICE_MSG_DISPLAY_INVAL_LIST 			= 105
+SPICE_MSG_DISPLAY_INVAL_ALL_PIXMAPS		= 106
+SPICE_MSG_DISPLAY_INVAL_PALETTE 		= 107
+SPICE_MSG_DISPLAY_INVAL_ALL_PALETTES 		= 108
 
-RED_DISPLAY_STREAM_CREATE 			= 122
-RED_DISPLAY_STREAM_DATA				= 123
-RED_DISPLAY_STREAM_CLIP				= 124
-RED_DISPLAY_STREAM_DESTROY			= 125
-RED_DISPLAY_STREAM_DESTROY_ALL			= 126
+SPICE_MSG_DISPLAY_STREAM_CREATE 		= 122
+SPICE_MSG_DISPLAY_STREAM_DATA			= 123
+SPICE_MSG_DISPLAY_STREAM_CLIP			= 124
+SPICE_MSG_DISPLAY_STREAM_DESTROY		= 125
+SPICE_MSG_DISPLAY_STREAM_DESTROY_ALL		= 126
 
-RED_DISPLAY_DRAW_FILL				= 302
-RED_DISPLAY_DRAW_OPAQUE				= 303
-RED_DISPLAY_DRAW_COPY				= 304
-RED_DISPLAY_DRAW_BLEND				= 305
-RED_DISPLAY_DRAW_BLACKNESS			= 306
-RED_DISPLAY_DRAW_WHITENESS			= 307
-RED_DISPLAY_DRAW_INVERS				= 308
-RED_DISPLAY_DRAW_ROP3				= 309
-RED_DISPLAY_DRAW_STROKE				= 310
-RED_DISPLAY_DRAW_TEXT				= 311
-RED_DISPLAY_DRAW_TRANSPARENT			= 312
-RED_DISPLAY_DRAW_ALPHA_BLEND			= 313
+SPICE_MSG_DISPLAY_DRAW_FILL			= 302
+SPICE_MSG_DISPLAY_DRAW_OPAQUE			= 303
+SPICE_MSG_DISPLAY_DRAW_COPY			= 304
+SPICE_MSG_DISPLAY_DRAW_BLEND			= 305
+SPICE_MSG_DISPLAY_DRAW_BLACKNESS		= 306
+SPICE_MSG_DISPLAY_DRAW_WHITENESS		= 307
+SPICE_MSG_DISPLAY_DRAW_INVERS			= 308
+SPICE_MSG_DISPLAY_DRAW_ROP3			= 309
+SPICE_MSG_DISPLAY_DRAW_STROKE			= 310
+SPICE_MSG_DISPLAY_DRAW_TEXT			= 311
+SPICE_MSG_DISPLAY_DRAW_TRANSPARENT		= 312
+SPICE_MSG_DISPLAY_DRAW_ALPHA_BLEND		= 313
 ----
 +
 . Client messages
 +
 [source,c]
 ----
-REDC_DISPLAY_INIT 				= 101
+SPICE_MSGC_DISPLAY_INIT 			= 101
 ----
 +
 . Operation flow
 +
-Spice server sends to the client a mode message using RED_DISPLAY_MODE for
+Spice server sends to the client a mode message using SPICE_MSG_DISPLAY_MODE for
 specifying the current draw area size and format. In response the client
 creates a draw area for rendering all the followed rendering commands sent by
 the server. The client will expose the new remote display area content (i.e.,
 after mode command) only after it receives a mark command (i.e.,
-RED_DISPLAY_MARK) from the server. The server can send a reset command using
-RED_DISPLAY_RESET to instruct the client to drop its draw area and palette
+SPICE_MSG_DISPLAY_MARK) from the server. The server can send a reset command using
+SPICE_MSG_DISPLAY_RESET to instruct the client to drop its draw area and palette
 cache.  Sending  mode message is allowed only while no active draw area exists
 on the client side. Sending reset message is  allowed only while active draw
 area exists on client side. Sending mark message is allowed only once, between
 mode and reset messages. Draw commands, copy bits command and stream commands
 are allowed only if the client have an active display area (i.e., between
-RED_DISPLAY_MODE to RED_DISPLAY_RESET).
+SPICE_MSG_DISPLAY_MODE to SPICE_MSG_DISPLAY_RESET).
 +
 On channel connection, the client optionally sends an init message, using
-REDC_DISPLAY_INIT, in order to enable image caching and global dictionary
+SPICE_MSGC_DISPLAY_INIT, in order to enable image caching and global dictionary
 compression. The message includes the cache id and its size and the size of the
 dictionary compression window. These sizes and id are determined by the client.
 It is disallowed to send more then one init message.
 +
 Color pallets cache are manged by the server.
 Items cache insertion commands are sent as part of  the rendering commands.
-Cache items removal are sent explicitly using RED_DISPLAY_INVAL_LIST or
-RED_DISPLAY_INVAL_LIST server messages. Resetting client caches is done by
-sending RED_DISPLAY_INVAL_ALL_IMAGES or RED_DISPLAY_INVAL_ALL_PALETTES server
+Cache items removal are sent explicitly using SPICE_MSG_DISPLAY_INVAL_LIST or
+SPICE_MSG_DISPLAY_INVAL_LIST server messages. Resetting client caches is done by
+sending SPICE_MSG_DISPLAY_INVAL_ALL_PIXMAPS or SPICE_MSG_DISPLAY_INVAL_ALL_PALETTES server
 messages.
 +
 . Draw area control
 +
-.. RED_DISPLAY_MODE,  RedMode
+.. SPICE_MSG_DISPLAY_MODE,  SpiceMsgDisplayMode
 +
 [cols="2*"]
 |===
@@ -1180,11 +1180,11 @@ messages.
 |color depth of the display area. Valid values are 16bpp  or 32bpp.
 |===
 +
-.. RED_DISPLAY_MARK, VOID
+.. SPICE_MSG_DISPLAY_MARK, VOID
 +
 Mark the beginning of the display area visibility
 +
-.. RED_DISPLAY_RESET, VOID
+.. SPICE_MSG_DISPLAY_RESET, VOID
 +
 Drop current display area of the channel and reset palette cache
 +
@@ -1199,77 +1199,77 @@ following definitions of rendering commands this combination is referred to by
 +
 [source,c]
 ----
-ROPD_INVERS_SRC 		= 1
+SPICE_ROPD_INVERS_SRC 		= 1
 ----
 +
 Source Image need to be inverted before rendering
 +
 [source,c]
 ----
-ROPD_INVERS_BRUSH 		= 2
+SPICE_ROPD_INVERS_BRUSH 	= 2
 ----
 +
-Brush need to be inverted before rendering
+SpiceBrush need to be inverted before rendering
 +
 [source,c]
 ----
-ROPD_INVERS_DEST 		= 4
+SPICE_ROPD_INVERS_DEST 		= 4
 ----
 +
 Destination area need to be inverted before rendering
 +
 [source,c]
 ----
-ROPD_OP_PUT 			= 8
+SPICE_ROPD_OP_PUT 		= 8
 ----
 +
-Copy operation should be used.
+SpiceCopy operation should be used.
 +
 [source,c]
 ----
-ROPD_OP_OR 			= 16
+SPICE_ROPD_OP_OR 		= 16
 ----
 +
 OR operation should be used.
 +
 [source,c]
 ----
-ROPD_OP_AND 			= 32
+SPICE_ROPD_OP_AND 		= 32
 ----
 +
 AND operation should be used.
 +
 [source,c]
 ----
-ROPD_OP_XOR 			= 64
+SPICE_ROPD_OP_XOR 		= 64
 ----
 +
 XOR operation should be used.
 +
 [source,c]
 ----
-ROPD_OP_BLACKNESS 		= 128
+SPICE_ROPD_OP_BLACKNESS 	= 128
 ----
 +
 Destination pixel should be replaced by black
 +
 [source,c]
 ----
-ROPD_OP_WHITENESS 		= 256
+SPICE_ROPD_OP_WHITENESS 	= 256
 ----
 +
 Destination pixel should be replaced by white
 +
 [source,c]
 ----
-ROPD_OP_INVERS 			= 512
+SPICE_ROPD_OP_INVERS 		= 512
 ----
 +
 Destination pixel should be inverted
 +
 [source,c]
 ----
-ROPD_INVERS_RES 		= 1024
+SPICE_ROPD_INVERS_RES 		= 1024
 ----
 +
 Result of the operation needs to be inverted
@@ -1355,7 +1355,7 @@ PIXMAP_FORMAT_RGBA		= 9
 +
 pixel format is 32 bits ARGB8888.
 +
-.. Palette
+.. SpicePalette
 +
 [cols="2*"]
 |===
@@ -1418,7 +1418,7 @@ beginning  of line n+1
 [source,c]
 ----
 union {
-	ADDRESS palette; /* address of the color palette. Must be zero if no
+	SPICE_ADDRESS palette; /* address of the color palette. Must be zero if no
 color table is required for format */
 }
 ----
@@ -1428,7 +1428,7 @@ color table is required for format */
 |UINT64 palette_id
 |id of the palette, valid if FLAG_PAL_FROM_CACHE is set
 
-|ADDRESS data
+|SPICE_ADDRESS data
 |address of line 0 of the pixmap.
 |===
 +
@@ -1476,7 +1476,7 @@ pixmap lines are ordered from top to bottom (i.e. line 0 is the highest line).
 [source,c]
 ----
 union {
-	ADDRESS palette; /* address of the color palette (see Palette section
+	SPICE_ADDRESS palette; /* address of the color palette (see SpicePalette section
 in “Raw raster image”). Zero value is disallowed. */
 	UINT64 palette_id; /* id of the palette, valid if FLAG_PAL_FROM_CACHE
 is set. */
@@ -1507,19 +1507,19 @@ being compressed.
 [source,c]
 ----
 IMAGE_TYPE_PIXMAP 		= 0
-IMAGE_TYPE_QUIC 		= 1
-IMAGE_TYPE_LZ_PLT 		= 100
-IMAGE_TYPE_LZ_RGB 		= 101
-IMAGE_TYPE_GLZ_RGB 		= 102
-IMAGE_TYPE_FROM_CACHE		= 103
+SPICE_IMAGE_TYPE_QUIC 		= 1
+SPICE_IMAGE_TYPE_LZ_PLT 	= 100
+SPICE_IMAGE_TYPE_LZ_RGB 	= 101
+SPICE_IMAGE_TYPE_GLZ_RGB 	= 102
+SPICE_IMAGE_TYPE_FROM_CACHE	= 103
 ----
 +
 .. Image flags
 +
 IMAGE_FLAG_CACHE_ME = 1, this flag instruct the client to add the image to
-image cache, cache key is ImageDescriptor.id (see below).
+image cache, cache key is SpiceImageDescriptor.id (see below).
 +
-.. ImageDescriptor
+.. SpiceImageDescriptor
 +
 [cols="2*"]
 |===
@@ -1541,8 +1541,8 @@ image cache, cache key is ImageDescriptor.id (see below).
 +
 .. Image data
 +
-Image data follows ImageDescriptor and its content depends on
-ImageDescriptor.type:
+Image data follows SpiceImageDescriptor and its content depends on
+SpiceImageDescriptor.type:
 +
 * In case of PIXMAP – content is Pixmap.
 * In case of QUIC – content is Quic compressed image. Data begins with   the
@@ -1556,15 +1556,15 @@ by the compressed data.
 begins with the size of the compressed data, represented by UINT32, ,  followed
 by the compressed data.
 * In case of FROM_CACHE –  No image data. The client should use
-ImageDescriptor.id to retrieve the relevant image from cache.
+SpiceImageDescriptor.id to retrieve the relevant image from cache.
 +
-. Glyph String
+. Glyph SpiceString
 +
 Glyph string defines an array of glyphs for rendering. Glyphs in a string can
 be in A1, A4 or A8  format (i.e., 1bpp, 4bpp, or 8bpp alpha mask). Every glyph
 contains its rendering position on the destination draw area.
 +
-.. RasterGlyph
+.. SpiceRasterGlyph
 +
 [cols="2*"]
 |===
@@ -1589,7 +1589,7 @@ is A4,  the line stride is ALIGN(width, 2) / 2. If the format is A8,  the line
 stride is width.
 |===
 +
-.. Glyph String flags
+.. Glyph SpiceString flags
 +
 [source,c]
 ----
@@ -1676,7 +1676,7 @@ PATH_SEGMENT_FLAG_BEZIER 	= 16
 +
 this segment content is a Bezier curve
 +
-.. PathSeg
+.. SpicePathSeg
 +
 [cols="2*"]
 |===
@@ -1692,9 +1692,9 @@ this segment content is a Bezier curve
 +
 .. PathSegList
 +
-List of PathSeg items. End of the list is reached if the sum of all previous
+List of SpicePathSeg items. End of the list is reached if the sum of all previous
 PathSegs' sizes is equal to  list_size. Address of next segment is the address
-of PathSeg.points[PathSeg.count]
+of SpicePathSeg.points[SpicePathSeg.count]
 +
 [cols="2*"]
 |===
@@ -1702,40 +1702,40 @@ of PathSeg.points[PathSeg.count]
 |total size of in bytes of all PathSegs in the list,
 |===
 +
-PathSeg seg0 – first path segment.
+SpicePathSeg seg0 – first path segment.
 +
-.. Clip types
+.. SpiceClip types
 +
 [source,c]
 ----
-CLIP_TYPE_NONE 		= 0
+SPICE_CLIP_TYPE_NONE 		= 0
 ----
 +
 no clipping
 +
 [source,c]
 ----
-CLIP_TYPE_RECTS		= 1
+SPICE_CLIP_TYPE_RECTS		= 1
 ----
 +
 data is RectList and union of all rectangles in RectList is the effective clip
 +
 [source,c]
 ----
-CLIP_TYPE_PATH		= 2
+SPICE_CLIP_TYPE_PATH		= 2
 ----
 +
 data is PathSegList and the figure described by PathSegList is the effective
 clip
 +
-.. Clip
+.. SpiceClip
 +
 [cols="2*"]
 |===
 |UIN32 type
 |one of CLIP_TYPE_?
 
-|ADDRESS data
+|SPICE_ADDRESS data
 |address of clip data. The content depends on <type>
 |===
 +
@@ -1754,34 +1754,34 @@ MASK_FLAG_INVERS 	= 1, the effective mask is the inverse of the mask
 
 |POINT position | origin of the mask in bitmap coordinates
 
-|ADDRESS bitmap | address of the mask's image, the format of the image must be
+|SPICE_ADDRESS bitmap | address of the mask's image, the format of the image must be
 1bpp. If the bitmap is zero then no masking operation needs to be preformed.
 |===
 +
 In all rendering commands, the mask must be big enough to cover the destination
 rectangle
 +
-.. Brush types
+.. SpiceBrush types
 +
 [source,c]
 ----
-BRUSH_TYPE_NONE		= 0 /* the brush is invalid */
-BRUSH_TYPE_SOLID	= 1 /* the brush is solid RGB color */
-BRUSH_TYPE_PATTERN	= 2 /* the brush is a pattern */
+SPICE_BRUSH_TYPE_NONE		= 0 /* the brush is invalid */
+SPICE_BRUSH_TYPE_SOLID		= 1 /* the brush is solid RGB color */
+SPICE_BRUSH_TYPE_PATTERN	= 2 /* the brush is a pattern */
 ----
 +
-.. Pattern
+.. SpicePattern
 +
 [cols="2*"]
 |===
-|ADDRESS image
+|SPICE_ADDRESS image
 |address of the pattern's Image
 
 |POINT position
 |origin coordinates of the pattern in the image
 |===
 +
-.. Brush
+.. SpiceBrush
 +
 [cols="2*"]
 |===
@@ -1794,7 +1794,7 @@ BRUSH_TYPE_PATTERN	= 2 /* the brush is a pattern */
 Union {
 	UINT32 color; */ RGB color. The format of the color depends on current
 draw area mode.*/
-	Pattern pattern;
+	SpicePattern pattern;
 }
 ----
 +
@@ -1804,14 +1804,14 @@ The following defines the method for scaling image
 +
 [source,c]
 ----
-IMAGE_SCALE_INTERPOLATE 		= 0
+SPICE_IMAGE_SCALE_MODE_INTERPOLATE 	= 0
 ----
 +
 The client is allowed to INTERPOLATE pixel color.
 +
 [source,c]
 ----
-IMAGE_SCALE_NEAREST 			= 1
+SPICE_IMAGE_SCALE_MODE_NEAREST 		= 1
 ----
 +
 The client must use the nearest pixel.
@@ -1851,7 +1851,7 @@ LINE_ATTR_CAP_SQUARE 			= 1
 LINE_ATTR_CAP_BUTT 			= 2
 ----
 +
-.. LineAttr
+.. SpiceLineAttr
 +
 [cols="2*"]
 |===
@@ -1867,14 +1867,14 @@ LINE_ATTR_CAP_BUTT 			= 2
 |UINT8 style_num_segments
 |number of style segments in line style
 
-|FIXED28_4 width
+|SPICE_FIXED28_4 width
 |width of the line in pixels
 
-|FIXED28_4 miter_limit
+|SPICE_FIXED28_4 miter_limit
 |miter limit in pixels
 
-| ADDRESS style
-|address of line style line style is array of FIXED28_4. The array defines
+| SPICE_ADDRESS style
+|address of line style line style is array of SPICE_FIXED28_4. The array defines
 segments that each represents length of  foreground or background pixels in the
 style. If FLAG_START_WITH_GAP is defined then the first segment in the style is
 background, otherwise it is foreground. Renderer uses  this array of segments
@@ -1883,7 +1883,7 @@ repeatedly during rendering operation.
 +
 . Rendering command
 +
-.. RedDrawBase
+.. SpiceMsgDisplayBase
 +
 Common field to all rendering command
 +
@@ -1892,45 +1892,45 @@ Common field to all rendering command
 |RECT bounding_box
 |the affected area on the display area
 
-|Clip clip
+|SpiceClip clip
 |the effective clip to set before rendering a command
 |===
 +
-.. RED_DISPLAY_COPY_BITS
+.. SPICE_MSG_DISPLAY_COPY_BITS
 +
 [source,c]
 ----
-RedDrawBase
+SpiceMsgDisplayBase
 POINT source_position
 ----
 +
-Copy bits from the draw area to bounding_box on the draw area. Source area left
+SpiceCopy bits from the draw area to bounding_box on the draw area. Source area left
 top corner is source_position and its height and width is equal to bounding_box
 height and width. Source and  destination rectangles can overlap.
 +
-.. RED_DISPLAY_DRAW_FILL
+.. SPICE_MSG_DISPLAY_DRAW_FILL
 +
 [source,c]
 ----
-RedDrawBase
-Brush brush
+SpiceMsgDisplayBase
+SpiceBrush brush
 UINT16 rop_descriptor
 Mask mask
 ----
 +
-Fill  bounding_box using brush as the fill pattern and rop_descriptor
+SpiceFill  bounding_box using brush as the fill pattern and rop_descriptor
 instructions. If the mask is valid, it will limit the modified area (i.e., only
 pixels on the destination area that their corresponding bits are set will be
 affected).
 +
-.. RED_DISPLAY_DRAW_OPAQUE
+.. SPICE_MSG_DISPLAY_DRAW_OPAQUE
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS source_image
+SpiceMsgDisplayBase
+SPICE_ADDRESS source_image
 RECT source_area
-Brush brush
+SpiceBrush brush
 UINT16 rop_descriptor
 UINT8 scale_mode
 Mask mask
@@ -1942,29 +1942,29 @@ bounding_box. In case scaling of source image is required it will be performed
 according to scale_mode and before the combination with brush pixels. If mask
 is valid it will limit the modified area.
 +
-.. RED_DISPLAY_DRAW_COPY
+.. SPICE_MSG_DISPLAY_DRAW_COPY
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS source_image
+SpiceMsgDisplayBase
+SPICE_ADDRESS source_image
 RECT source_area
 UINT16 rop_descriptor
 UINT8 scale_mode
 Mask mask
 ----
 +
-Copy pixels from source_area in source_image to bounding_box using
+SpiceCopy pixels from source_area in source_image to bounding_box using
 rop_descriptor instructions. In case scaling of source image is required it
 will be performed according to scale_mode and before the copying to the draw
 area. If mask is valid it will limit the modified area.
 +
-.. RED_DISPLAY_DRAW_BLEND
+.. SPICE_MSG_DISPLAY_DRAW_BLEND
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS source_image
+SpiceMsgDisplayBase
+SPICE_ADDRESS source_image
 RECT source_area
 UINT16 rop_descriptor
 UINT8 scale_mode
@@ -1976,47 +1976,47 @@ draw area using rop_descriptor instructions. In case scaling of source image is
 required it will be performed according to scale_mode and before the mixing
 with the draw area. If mask is valid it will limit the modified area.
 +
-.. RED_DISPLAY_DRAW_BLACKNESS
+.. SPICE_MSG_DISPLAY_DRAW_BLACKNESS
 +
 [source,c]
 ----
-RedDrawBase
+SpiceMsgDisplayBase
 Mask mask
 ----
 +
-Fill bounding_box with black pixels. If mask is valid it will limit the
+SpiceFill bounding_box with black pixels. If mask is valid it will limit the
 modified area.
 +
-.. RED_DISPLAY_DRAW_WHITENESS
+.. SPICE_MSG_DISPLAY_DRAW_WHITENESS
 +
 [source,c]
 ----
-RedDrawBase
+SpiceMsgDisplayBase
 Mask mask
 ----
 +
-Fill bounding_box with white pixels. If mask is valid it will limit the
+SpiceFill bounding_box with white pixels. If mask is valid it will limit the
 modified area.
 +
-.. RED_DISPLAY_DRAW_INVERS
+.. SPICE_MSG_DISPLAY_DRAW_INVERS
 +
 [source,c]
 ----
-RedDrawBase
+SpiceMsgDisplayBase
 Mask mask
 ----
 +
 Inverse all pixels in bounding_box. If mask is valid it will limit the modified
 area.
 +
-.. RED_DISPLAY_DRAW_ROP3
+.. SPICE_MSG_DISPLAY_DRAW_ROP3
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS source_image
+SpiceMsgDisplayBase
+SPICE_ADDRESS source_image
 RECT source_area
-Brush brush
+SpiceBrush brush
 UINT8 rop3
 UINT8 scale_mode
 Mask mask
@@ -2029,36 +2029,36 @@ operations). In case scaling of source image is required it will be performed
 according to scale_mode and before the mixing. If mask is valid it will limit
 the modified area.
 +
-.. RED_DISPLAY_DRAW_TRANSPARENT
+.. SPICE_MSG_DISPLAY_DRAW_TRANSPARENT
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS source_image
+SpiceMsgDisplayBase
+SPICE_ADDRESS source_image
 RECT source_area
 UINT32 transparent_color
 UINT32 transparent _true_color
 ----
 +
-Copy pixels from source_area on source_image to  bounding_box on the draw area.
-In case scaling of source image is required  it will use IMAGE_SCALE_NEAREST.
+SpiceCopy pixels from source_area on source_image to  bounding_box on the draw area.
+In case scaling of source image is required  it will use SPICE_IMAGE_SCALE_MODE_NEAREST.
 Pixels with value equal to the transparent color will be masked out.
-Transparent color is provided in two forms: true color (i.e., RGB888) and  the
+SpiceTransparent color is provided in two forms: true color (i.e., RGB888) and  the
 color in the original format (i.e., before compression) .
 +
-.. RED_DISPLAY_DRAW_ALPHA_BLEND
+.. SPICE_MSG_DISPLAY_DRAW_ALPHA_BLEND
 +
 [source,c]
 ----
-RedDrawBase
+SpiceMsgDisplayBase
 UINT8 alpha
-ADDRESS source_image
+SPICE_ADDRESS source_image
 RECT source_area
 ----
 +
 Alpha blend source_area of source_image on  bounding_box of draw area using
 alpha value or alternatively per pixel alpha value.  In case scaling of source
-image is required, it will use IMAGE_SCALE_INTERPOLATE mode. Alpha value is
+image is required, it will use SPICE_IMAGE_SCALE_MODE_INTERPOLATE mode. Alpha value is
 defined as 0 is full transparency and 255 is full opacity. Format of source
 image can be pre-multiplied ARGB8888 for per pixel alpha value.
 +
@@ -2071,13 +2071,13 @@ alpha' =   (source_alpha *  alpha)  /  255
 new_color = color' + ((255 - alpha' ) * destination_color) / 255
 ----
 +
-.. RED_DISPLAY_DRAW_STROKE
+.. SPICE_MSG_DISPLAY_DRAW_STROKE
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS path – address of the PathSegList that defines the path to render
-LineAttr attr
+SpiceMsgDisplayBase
+SPICE_ADDRESS path – address of the PathSegList that defines the path to render
+SpiceLineAttr attr
 Bush brush
 UINT16 fore_mode -  foreground rop_descriptor
 UINT16 back_mode – background rop_descriptor
@@ -2089,15 +2089,15 @@ styled (i.e., LINE_ATTR_FLAG_STYLED is set in attr.falgs) then background
 drawn using fore_mode. If the line is not  styled, the entire path is rendered
 using fore_mode.
 +
-.. RED_DISPLAY_DRAW_TEXT
+.. SPICE_MSG_DISPLAY_DRAW_TEXT
 +
 [source,c]
 ----
-RedDrawBase
-ADDRESS string – address of GlyphString
+SpiceMsgDisplayBase
+SPICE_ADDRESS string – address of GlyphString
 RECT back_area
-Brush fore_brush
-Brush back_brush
+SpiceBrush fore_brush
+SpiceBrush back_brush
 UINT16 fore_mode
 UINT16 back_mode
 ----
@@ -2118,12 +2118,12 @@ for having smoother playback and audio synchronization. Audio  synchronization
 is achieved by  using time stamp that is attached to audio and video streams.
 By using video streaming the network traffic can be dramatically reduced. When
 the stream is created, the server sends create message using
-RED_DISPLAY_STREAM_CREATE. After the server creates a stream he can send data
-using RED_DISPLAY_STREAM_DATA, or set new stream clipping by sending clip
-message using RED_DISPLAY_STREAM_CLIP. Once the server no longer needs the
-stream, he can send destroy command using RED_DISPLAY_STREAM_DESTROY. The
+SPICE_MSG_DISPLAY_STREAM_CREATE. After the server creates a stream he can send data
+using SPICE_MSG_DISPLAY_STREAM_DATA, or set new stream clipping by sending clip
+message using SPICE_MSG_DISPLAY_STREAM_CLIP. Once the server no longer needs the
+stream, he can send destroy command using SPICE_MSG_DISPLAY_STREAM_DESTROY. The
 server can also destroy all active streams by sending destroy all message using
-RED_DISPLAY_STREAM_DESTROY_ALL.
+SPICE_MSG_DISPLAY_STREAM_DESTROY_ALL.
 +
 .. Stream flags
 +
@@ -2139,7 +2139,7 @@ STREAM_FLAG_TOP_DOWN = 1 /* stream frame line order is from top to bottom */
 STREAM_CODEC_TYPE_MJPEG = 1 /* this stream uses motion JPEG  codec */
 ----
 +
-.. RED_DISPLAY_STREAM_CREATE,  RedStreamCreate
+.. SPICE_MSG_DISPLAY_STREAM_CREATE,  SpiceMsgDisplayStreamCreate
 +
 [cols="2*"]
 |===
@@ -2170,16 +2170,16 @@ STREAM_CODEC_TYPE_MJPEG = 1 /* this stream uses motion JPEG  codec */
 |RECT destination
 |area to render into on the client display area
 
-|Clip clip
+|SpiceClip clip
 |clipping of the stream
 |===
 +
-.. RED_DISPLAY_STREAM_DATA, RedStreamData
+.. SPICE_MSG_DISPLAY_STREAM_DATA, SpiceMsgDisplayStreamData
 +
 [cols="2*"]
 |===
 |UINT32 id
-|stream id (i.e., RedStreamCreate.id)
+|stream id (i.e., SpiceMsgDisplayStreamCreate.id)
 
 |UINT32 multimedia_time
 |frame time stamp
@@ -2191,21 +2191,21 @@ STREAM_CODEC_TYPE_MJPEG = 1 /* this stream uses motion JPEG  codec */
 |additional data padding in bytes
 
 |UINT8[] data
-|stream data depending on RedStreamCreate.codec_type. Size of  data is (
+|stream data depending on SpiceMsgDisplayStreamCreate.codec_type. Size of  data is (
 data_size +  pad_size)
 |===
 +
-.. RED_DISPLAY_STREAM_CLIP, RedStreamClip
+.. SPICE_MSG_DISPLAY_STREAM_CLIP, SpiceMsgDisplayStreamClip
 +
 [cols="2*"]
 |===
 |UINT32 id
-|stream id (i.e., RedStreamCreate.id)
+|stream id (i.e., SpiceMsgDisplayStreamCreate.id)
 |===
 +
-Clip clip – new clipping of the stream
+SpiceClip clip – new clipping of the stream
 +
-.. RED_DISPLAY_STREAM_DESTROY, UINT32
+.. SPICE_MSG_DISPLAY_STREAM_DESTROY, UINT32
 +
 [cols="2*"]
 |===
@@ -2213,7 +2213,7 @@ Clip clip – new clipping of the stream
 |id of stream to destroy
 |===
 +
-.. RED_DISPLAY_STREAM_DESTROY_ALL, VOID
+.. SPICE_MSG_DISPLAY_STREAM_DESTROY_ALL, VOID
 +
 Destroy all active streams
 +
@@ -2248,7 +2248,7 @@ RED_RES_TYPE_IMAGE = 1
 |list of  resources id
 |===
 +
-.. RED_DISPLAY_INVAL_LIST, RedResourceList
+.. SPICE_MSG_DISPLAY_INVAL_LIST, RedResourceList
 +
 [cols="2*"]
 |===
@@ -2256,13 +2256,13 @@ RED_RES_TYPE_IMAGE = 1
 |list of resources to remove from cache
 |===
 +
-.. RED_DISPLAY_INVAL_ALL_IMAGES, RedWaitForChannels
+.. SPICE_MSG_DISPLAY_INVAL_ALL_PIXMAPS, SpiceMsgWaitForChannels
 +
-Remove all images from the image cache. The client must use RedWaitForChannels
+Remove all images from the image cache. The client must use SpiceMsgWaitForChannels
 (for more info see <<channel_sync,Channel synchronization>>) to synchronize
 with other channels before clearing the cache.
 +
-.. RED_DISPLAY_INVAL_PALETTE, UINT64
+.. SPICE_MSG_DISPLAY_INVAL_PALETTE, UINT64
 +
 [cols="2*"]
 |===
@@ -2270,7 +2270,7 @@ with other channels before clearing the cache.
 |client needs to remove palette with that id from the cache
 |===
 +
-.. RED_DISPLAY_INVAL_ALL_PALETTES, VOID
+.. SPICE_MSG_DISPLAY_INVAL_ALL_PALETTES, VOID
 +
 Remove all palettes from palette cache
 
@@ -2281,43 +2281,43 @@ position on the remote display area, cursor position messages are irrelevant
 for client mouse mode (see <<mouse_modes,Mouse Modes>>). Spice protocol also
 defines a set of messages for managing cursor shape cache on the client site.
 Client must strictly obey all such instructions. The server sends
-RED_CURSOR_INIT to set current pointer state (i.e., shape, position, visibility
+SPICE_MSG_CURSOR_INIT to set current pointer state (i.e., shape, position, visibility
 etc.) and to clear shape cache. After the server sends init message it can send
-any other cursor command except for RED_CURSOR_INIT. The server can send
-RED_CURSOR_RESET message - this will disable the cursor and reset the cursor
+any other cursor command except for SPICE_MSG_CURSOR_INIT. The server can send
+SPICE_MSG_CURSOR_RESET message - this will disable the cursor and reset the cursor
 cache. After this message the only valid message the server can send is
-RED_CURSOR_INIT. The relevant remote display area for a cursor channel is the
+SPICE_MSG_CURSOR_INIT. The relevant remote display area for a cursor channel is the
 one of the display channel that has the same channel id (i.e.,
-RedLinkMess.channel_id).
+SpiceLinkMess.channel_id).
 
 . Server messages
 +
 [source,c]
 ----
-RED_CURSOR_INIT 		= 101
-RED_CURSOR_RESET		= 102
-RED_CURSOR_SET			= 103
-RED_CURSOR_MOVE			= 104
-RED_CURSOR_HIDE			= 105
-RED_CURSOR_TRAIL		= 106
-RED_CURSOR_INVAL_ONE		= 107
-RED_CURSOR_INVAL_ALL		= 108
+SPICE_MSG_CURSOR_INIT 		= 101
+SPICE_MSG_CURSOR_RESET		= 102
+SPICE_MSG_CURSOR_SET		= 103
+SPICE_MSG_CURSOR_MOVE		= 104
+SPICE_MSG_CURSOR_HIDE		= 105
+SPICE_MSG_CURSOR_TRAIL		= 106
+SPICE_MSG_CURSOR_INVAL_ONE	= 107
+SPICE_MSG_CURSOR_INVAL_ALL	= 108
 ----
 +
 .. Cursors types
 +
 [source,c]
 ----
-CURSOR_TYPE_ALPHA 		= 0
-CURSOR_TYPE_MONO 		= 1
-CURSOR_TYPE_COLOR4 		= 2
-CURSOR_TYPE_COLOR8 		= 3
-CURSOR_TYPE_COLOR16 		= 4
-CURSOR_TYPE_COLOR24 		= 5
-CURSOR_TYPE_COLOR32 		= 6
+SPICE_CURSOR_TYPE_ALPHA 	= 0
+SPICE_CURSOR_TYPE_MONO 		= 1
+SPICE_CURSOR_TYPE_COLOR4 	= 2
+SPICE_CURSOR_TYPE_COLOR8 	= 3
+SPICE_CURSOR_TYPE_COLOR16 	= 4
+SPICE_CURSOR_TYPE_COLOR24 	= 5
+SPICE_CURSOR_TYPE_COLOR32 	= 6
 ----
 +
-.. CursorHeader
+.. SpiceCursorHeader
 +
 [cols="2*"]
 |===
@@ -2348,7 +2348,7 @@ and retrieving cursors from the cursor cache.
 CURSOR_FLAGS_NONE 		= 1
 ----
 +
-set when RedCursor (see below) is invalid
+set when SpiceCursor (see below) is invalid
 +
 [source,c]
 ----
@@ -2356,30 +2356,30 @@ CURSOR_CURSOR_FLAGS _CACHE_ME 	= 2
 ----
 +
 set when the client should add this shape to the shapes cache. The client will
-use CursorHeader.unique as cache key.
+use SpiceCursorHeader.unique as cache key.
 +
 [source,c]
 ----
 CURSOR_FLAGS_FROM_CACHE 	= 4
 ----
 +
-set when the client should retrieve the cursor shape, using CursorHeader.unique
-as key, from the shapes cache. In this case all fields of CursorHeader except
+set when the client should retrieve the cursor shape, using SpiceCursorHeader.unique
+as key, from the shapes cache. In this case all fields of SpiceCursorHeader except
 for 'unique' are invalid.
 +
-.. RedCursor
+.. SpiceCursor
 +
 [cols="2*"]
 |===
 |UINT32 flags
 |any valid combination of  RED_CURSOR_?
 
-|CursorHeader header
+|SpiceCursorHeader header
 |
 
 |UINT8[] data
 |actual cursor shape data, the size is determine by width, height and type from
-CursorHeader. Next we will describe in detail the  shape data format according
+SpiceCursorHeader. Next we will describe in detail the  shape data format according
 to cursor type:
 
 |ALPHA, alpha shape
@@ -2423,7 +2423,7 @@ ALIGN(<width>, 8) / 8; bits order within every byte is big endian.
 For more deatails on drawing the cursor shape see <<cursor_shape, this
 section>>
 +
-.. RED_CURSOR_INIT, RedCursorInit
+.. SPICE_MSG_CURSOR_INIT, SpiceMsgCursorInit
 +
 [cols="2*"]
 |===
@@ -2440,13 +2440,13 @@ client mode.
 |UIN8 visible
 |if 1, the cursor is visible. If 0, the cursor is invisible.
 
-|RedCursor cursor
+|SpiceCursor cursor
 |current cursor shape
 |===
 +
-.. RED_CURSOR_RESET, VOID
+.. SPICE_MSG_CURSOR_RESET, VOID
 +
-.. RED_CURSOR_SET, RedCursorSet
+.. SPICE_MSG_CURSOR_SET, SpiceMsgCursorSet
 +
 [cols="2*"]
 |===
@@ -2457,11 +2457,11 @@ mode.
 |UINT8 visible
 |if 1, the cursor is visible. If 0, the cursor is invisible.
 
-|RedCursor cursor
+|SpiceCursor cursor
 |current cursor shape
 |===
 +
-.. RED_CURSOR_MOVE, POINT16
+.. SPICE_MSG_CURSOR_MOVE, POINT16
 +
 [cols="2*"]
 |===
@@ -2470,11 +2470,11 @@ mode.
 sets cursor visibility to 1.
 |===
 +
-.. RED_CURSOR_HIDE, VOID
+.. SPICE_MSG_CURSOR_HIDE, VOID
 +
 Hide pointer on the relevant display area.
 +
-.. RED_CURSOR_TRAIL
+.. SPICE_MSG_CURSOR_TRAIL
 +
 [cols="2*"]
 |===
@@ -2485,7 +2485,7 @@ Hide pointer on the relevant display area.
 |millisecond interval between trail updates
 |===
 +
-.. RED_CURSOR_INVAL_ONE, UINT64
+.. SPICE_MSG_CURSOR_INVAL_ONE, UINT64
 +
 [cols="2*"]
 |===
@@ -2493,7 +2493,7 @@ Hide pointer on the relevant display area.
 |id of cursor shape to remove from the cursor cache
 |===
 +
-.. RED_CURSOR_INVAL_ALL, VOLD
+.. SPICE_MSG_CURSOR_INVAL_ALL, VOLD
 +
 Clear cursor cache
 +
@@ -2523,10 +2523,10 @@ Else, put source color.
 == Playback channel definition
 
 Spice supports sending audio streams for playback on the client side. An audio
-stream is sent by the server in an audio packet using RED_PLAYBACK_DATA
+stream is sent by the server in an audio packet using SPICE_MSG_PLAYBACK_DATA
 message. The content of the audio packet is controlled by the playback mode
-that the server sends using RED_PLAYBACK_MODE message. The server can start and
-stop the stream using RED_PLAYBACK_START and RED_PLAYBACK_STOP messages.
+that the server sends using SPICE_MSG_PLAYBACK_MODE message. The server can start and
+stop the stream using SPICE_MSG_PLAYBACK_START and SPICE_MSG_PLAYBACK_STOP messages.
 Sending audio packet is allowed only between  start and stop messages. Sending
 start message is allowed only in stop state and after at least one mode message
 was sent. Sending a stop message is allowed only during a start state.
@@ -2535,10 +2535,10 @@ was sent. Sending a stop message is allowed only during a start state.
 +
 [source,c]
 ----
-RED_PLAYBACK_DATA 			= 101
-RED_PLAYBACK_MODE 			= 102
-RED_PLAYBACK_START			= 103
-RED_PLAYBACK_STOP			= 104
+SPICE_MSG_PLAYBACK_DATA 		= 101
+SPICE_MSG_PLAYBACK_MODE 		= 102
+SPICE_MSG_PLAYBACK_START		= 103
+SPICE_MSG_PLAYBACK_STOP			= 104
 ----
 +
 . Audio format
@@ -2564,13 +2564,13 @@ RED_PLAYBACK_DATA_MODE_CELT_0_5_1	= 2
 +
 [source,c]
 ----
-RED_PLAYBACK_CAP_CELT_0_5_1 		= 0
+SPICE_PLAYBACK_CAP_CELT_0_5_1 		= 0
 ----
 +
 Spice client needs to declare support of CELT_5_1 in channel capabilities in
 order to allow the server to send playback packets in CELT_0_5_1 format.
 +
-. RED_PLAYBACK_MODE, RedPlaybackMode
+. SPICE_MSG_PLAYBACK_MODE, SpiceMsgPlaybackMode
 +
 [cols="2*"]
 |===
@@ -2584,7 +2584,7 @@ order to allow the server to send playback packets in CELT_0_5_1 format.
 |specific data, content depend on mode
 |===
 +
-. RED_PLAYBACK_START, RedRecordStart
+. SPICE_MSG_PLAYBACK_START, SpiceMsgRecordStart
 +
 [cols="2*"]
 |===
@@ -2598,7 +2598,7 @@ order to allow the server to send playback packets in CELT_0_5_1 format.
 |channel samples per second
 |===
 +
-. RED_PLAYBACK_DATA, RedPlaybackPacket
+. SPICE_MSG_PLAYBACK_DATA, SpiceMsgPlaybackPacket
 +
 [cols="2*"]
 |===
@@ -2609,22 +2609,22 @@ order to allow the server to send playback packets in CELT_0_5_1 format.
 |playback data , content depend on mode
 |===
 +
-. RED_PLAYBACK_STOP, VOID
+. SPICE_MSG_PLAYBACK_STOP, VOID
 +
 Stop current audio playback
 
 == Record Channel definition
 
 Spice supports transmitting of audio captured streams from the client to the
-server. Spice server starts audio capturing using RED_RECORD_START message.
+server. Spice server starts audio capturing using SPICE_MSG_RECORD_START message.
 This message instructs the client to start transmitting captured audio . In
 response, the client sends time stamp of the stream start using
-REDC_RECORD_START_MARK. After the client sends start mark it can start
-transmitting audio stream data using REDC_RECORD_DATA. One mode message must be
-sent by the client before any other message using REDC_RECORD_MODE. This, in
+SPICE_MSGC_RECORD_START_MARK. After the client sends start mark it can start
+transmitting audio stream data using SPICE_MSGC_RECORD_DATA. One mode message must be
+sent by the client before any other message using SPICE_MSGC_RECORD_MODE. This, in
 order to inform the server on what type of data will be transferred. Mode
 message can also be transmitted at any other time in order to switch the data
-type delivered by REDC_RECORD_DATA. The Server can send RED_RECORD_STOP for
+type delivered by SPICE_MSGC_RECORD_DATA. The Server can send SPICE_MSG_RECORD_STOP for
 stopping captured audio streaming. Sending a start message is allowed only
 while the stream is in stop state. Sending a stop message and data messages is
 allowed only while the stream is in start state. Sending mark message is
@@ -2634,17 +2634,17 @@ allowed only between start message and the first data message.
 +
 [source,c]
 ----
-RED_RECORD_START 			= 101
-RED_RECORD_STOP				= 102
+SPICE_MSG_RECORD_START 			= 101
+SPICE_MSG_RECORD_STOP			= 102
 ----
 +
 . Client messages
 +
 [source,c]
 ----
-REDC_RECORD_DATA 			= 101
-REDC_RECORD_MODE			= 102
-REDC_RECORD_START_MARK			= 103
+SPICE_MSGC_RECORD_DATA 			= 101
+SPICE_MSGC_RECORD_MODE			= 102
+SPICE_MSGC_RECORD_START_MARK		= 103
 ----
 +
 . Audio format
@@ -2670,13 +2670,13 @@ RED_RECORD_DATA_MODE_CELT_0_5_1		= 2
 +
 [source,c]
 ----
-RED_PLAYBACK_CAP_CELT_0_5_1 		= 0
+SPICE_PLAYBACK_CAP_CELT_0_5_1 		= 0
 ----
 +
 Spice server needs to declare support of CELT_5_1 in channel capabilities in
 order to allow the client to send recorded packets in CELT_0_5_1 format.
 +
-. REDC_RECORD_MODE, RedcRecordMode
+. SPICE_MSGC_RECORD_MODE, SpiceMsgcRecordMode
 +
 [cols="2*"]
 |===
@@ -2690,7 +2690,7 @@ order to allow the client to send recorded packets in CELT_0_5_1 format.
 |specific data, content depend on mode
 |===
 +
-. RED_RECORD_START, RedRecordStart
+. SPICE_MSG_RECORD_START, SpiceMsgRecordStart
 +
 [cols="2*"]
 |===
@@ -2698,13 +2698,13 @@ order to allow the client to send recorded packets in CELT_0_5_1 format.
 |number of audio channels
 
 |UINT32 format
-|one of RED_AUDIO_FMT_?
+|one of SPICE_AUDIO_FMT_?
 
 |UINT32 frequency
 |channel samples per second
 |===
 +
-. REDC_RECORD_START_MARK, UINT32
+. SPICE_MSGC_RECORD_START_MARK, UINT32
 +
 [cols="2*"]
 |===
@@ -2712,7 +2712,7 @@ order to allow the client to send recorded packets in CELT_0_5_1 format.
 |client time stamp of stream start
 |===
 +
-. REDC_RECORD_DATA, RedcRecordPacket
+. SPICE_MSGC_RECORD_DATA, SpiceMsgcRecordPacket
 +
 [cols="2*"]
 |===
@@ -2723,6 +2723,6 @@ order to allow the client to send recorded packets in CELT_0_5_1 format.
 |recorded data , content depend on mode
 |===
 +
-. RED_RECORD_STOP, VOID
+. SPICE_MSG_RECORD_STOP, VOID
 +
 Stop current audio capture
-- 
2.21.0

_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/spice-devel

[Index of Archives]     [Linux Virtualization]     [Linux Virtualization]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]     [Monitors]