On 05/07/2018 17:04, Mitja Mihelič wrote:
On 05/07/2018 16:56, Mitja Mihelič wrote:
On 19/06/2018 10:09, Victor Toso wrote:
Hi,
On Mon, Jun 18, 2018 at 04:23:32PM +0200, Mitja Mihelič wrote:
Does it work fine with remote-viewer?
Question ^
You could try different image compression too,
e.g image-compression=off
https://people.freedesktop.org/~teuf/spice-doc/html/ch03.html
Cheers,
toso
Why would this be happening? Help would be very much
appreciated.
Kind regards,
Mitja
I would also try to download a new version of spice-html5 and use
it directly to see if the problem is fixed.
Note that you can set image compression using libvirt like
<graphics type='spice' port='5901' autoport='no'>
<image compression='auto_glz'/>
</graphics>
(note the "image" element inside "graphics").
Frediano
Where would I set those options?
You must have access to the host which is the computer running
qemu and run `virsh edit $domain` for the xml file
toso
Here are the sections containing the string "spice".
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0'/>
<address type='virtio-serial' controller='0' bus='0' port='3'/>
</channel>
...
<graphics type='spice' autoport='yes' keymap='en-us'
defaultMode='secure' passwd='*****' passwdValidTo='1970-01-01T00:00:01'>
<listen type='network' network='vdsm-ovirtmgmt'/>
<channel name='main' mode='secure'/>
<channel name='display' mode='secure'/>
<channel name='inputs' mode='secure'/>
<channel name='cursor' mode='secure'/>
<channel name='playback' mode='secure'/>
<channel name='record' mode='secure'/>
<channel name='smartcard' mode='secure'/>
<channel name='usbredir' mode='secure'/>
</graphics>
Is there anything else I should be looking at?
Kind regards,
Mitja
The previous output was taken from a server, where SPICE works. This
one is from a server that produces the initially described issue. The
only difference I see are the passwd and passwdValidTo settings.
<channel type='spicevmc'>
<target type='virtio' name='com.redhat.spice.0'/>
<address type='virtio-serial' controller='0' bus='0' port='3'/>
</channel>
...
<graphics type='spice' autoport='yes' keymap='en-us'
defaultMode='secure'>
<listen type='network' network='vdsm-ovirtmgmt'/>
<channel name='main' mode='secure'/>
<channel name='display' mode='secure'/>
<channel name='inputs' mode='secure'/>
<channel name='cursor' mode='secure'/>
<channel name='playback' mode='secure'/>
<channel name='record' mode='secure'/>
<channel name='smartcard' mode='secure'/>
<channel name='usbredir' mode='secure'/>
</graphics>
Kind regards,
Mitja
_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/spice-devel
Answering the question for posterity.
We found a temporary solution to the described problem.
We had an oVirt development cluster with a working SPICE console. By
comparing packages we have established the differences between working
and not working SPICE setup. We have isolated the spice-server package.
The installed version was spice-server-0.14.0-2.el7_5.3.x86_64
We downgraded the package to spice-server-0.12.8-2.el7.1.x86_64 and
rebooted the nodes in sequence.
Now the SPICE console works again.
Kind regards,
Mitja
_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/spice-devel