On 06/08/2017 10:52 AM, Pavel Grunt wrote:
On Wed, 2017-06-07 at 14:29 -0300, guidugli@xxxxxxxxx wrote:
Hi Uri and Pavel,
Sorry for the delay but I was really busy at work in the past days
and
I wanted to play a bit with the settings and make sure I am not
doing
some mistake. So, I did install the latest vdagent and my VM is set
like below:
<model type='qxl' ram='65536' vram='65536' vgamem='16384' heads='1'
primary='yes'/>
If I try to change the resolution of the VM, I can change to
2560x1440,
or 2560x1600 but there is no 2560x1080 mode available.
I believe that the problem is that this mode is not listed in the
qxl/vdagent driver.
Why do you need to do it manually? The guest will adjust automatically
if you use remote-viewer or virt-viewer to connect to it.
Specifically, try to enable fullscreen-mode via remote-viewer's
menu View->FullScreen.
Uri.
Do you have the latest spice guest tools?
Pavel
Thanks
Carlos
On Mon, 2017-05-22 at 11:34 +0300, Uri Lublin wrote:
On 05/22/2017 10:59 AM, Pavel Grunt wrote:
Hi,
On Sat, 2017-05-20 at 20:18 -0300, guidugli@xxxxxxxxx wrote:
Hi,
I have an ultra wide monitor that has max resolution of
2560x1080. I
use KVM + Spice QXL on all VMs. Unfortunately, I cannot use
this
resolution on my virtual machines. Since I can reach this
resolution
if
I use GPU passthrough, I believe the limitation is in spice.
If my suspicion is correct, how do I add this resolution?
you must install the latest spice vdagent and set qxl memory
parameters.
For more details see:
https://www.spice-space.org/multiple-monitors.html
Pavel
Hi,
I just want to add that by default (64 MB ram (Bar0)
and 16MB vgamem) this resolution should be supported
and that if you change to fullscreen mode (and
spice-vdagent is running on the guest) then Spice
should automatically change the guest resolution to fit
your monitor.
Uri.
Thank you,
Carlos
_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/spice-devel