Re: [qxl] Use pci_io_write8 instead of outb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



ack

----- Original Message -----
> From: Adam Jackson <ajax@xxxxxxxxxx>
> 
> This ensures better portability as some arches (eg aarch64) don't have
> outb.
> On linux pci_io_* try to open the sysfs map file corresponding to the
> I/O port range, which the kernel translates arch-appropriately.  If
> there is no such file then it'll try to use port instructions if that's
> a thing the architecture has.  So you only need one path, pciaccess
> exists to get the portability right for you.
> 
> https://bugzilla.redhat.com/show_bug.cgi?id=1201877
> ---
> Hey,
> 
> This patch was suggested by Adam as a way to fix the build failure reported
> in rhbz#1201877
> It hasn't been runtime tested on aarch64, but it builds there. I've ran some
> quick tests on x86, and things are fine there.
> 
> Christophe
> 
> 
>  src/qxl.h        | 3 ++-
>  src/qxl_driver.c | 5 +++++
>  2 files changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/src/qxl.h b/src/qxl.h
> index f46bc58..ff55604 100644
> --- a/src/qxl.h
> +++ b/src/qxl.h
> @@ -273,6 +273,7 @@ struct _qxl_screen_t
>  #ifndef XSPICE
>  #ifdef XSERVER_LIBPCIACCESS
>      struct pci_device *		pci;
> +    struct pci_io_handle *	io;
>  #else
>      pciVideoPtr			pci;
>      PCITAG			pci_tag;
> @@ -631,7 +632,7 @@ void ioport_write(qxl_screen_t *qxl, uint32_t io_port,
> uint32_t val);
>  #else
>  static inline void ioport_write(qxl_screen_t *qxl, int port, int val)
>  {
> -    outb(qxl->io_base + port, val);
> +    pci_io_write8(qxl->io, port, val);
>  }
>  #endif
>  
> diff --git a/src/qxl_driver.c b/src/qxl_driver.c
> index 942067f..ce0a88e 100644
> --- a/src/qxl_driver.c
> +++ b/src/qxl_driver.c
> @@ -219,6 +219,8 @@ unmap_memory_helper (qxl_screen_t *qxl)
>  	pci_device_unmap_range (qxl->pci, qxl->vram, qxl->pci->regions[1].size);
>      if (qxl->rom)
>  	pci_device_unmap_range (qxl->pci, qxl->rom, qxl->pci->regions[2].size);
> +    if (qxl->io)
> +	pci_device_close_io (qxl->pci, qxl->io);
>  #else
>      if (qxl->ram)
>  	xf86UnMapVidMem (scrnIndex, qxl->ram, (1 << qxl->pci->size[0]));
> @@ -251,6 +253,9 @@ map_memory_helper (qxl_screen_t *qxl)
>                            qxl->pci->regions[2].size, 0,
>                            (void **)&qxl->rom);
>      
> +    qxl->io = pci_device_open_io(qxl->pci,
> +                                qxl->pci->regions[3].base_addr,
> +                                qxl->pci->regions[3].size);
>      qxl->io_base = qxl->pci->regions[3].base_addr;
>  #else
>      qxl->ram = xf86MapPciMem (scrnIndex, VIDMEM_FRAMEBUFFER,
> --
> 2.4.0
> 
> _______________________________________________
> Spice-devel mailing list
> Spice-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/spice-devel
> 
_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/spice-devel





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]     [Monitors]