Re: win 7 terminal recognize usb as libusbx devicewhen exiting usb redirect

["=?gb18030?b?s8LH5w==?=" <chenqing@xxxxxxxxxxxx>]

On 10/22/2014 04:40 AM, ³ÂÇç wrote:
> hi, all:
> environment:
>     terminal: win 7
>     guest: win 7
>     usb redirect: usb clerk (provided by Cody Chan)
>     usb device: kinston data traveller 8G
>                     teclast 16G (use correctly)
>                     usb harddisk (use correctly)
>
> following is my steps to use kinston usb storage:
>  1.connect usb to terminal, recognize as: mass storage device
>  2.use virt-viewer to connect to guest, usb device is successfully
> redirected
>  3.disconnect from guest
>  4.back to terminal, usb device recognize as "universal serial bus
> device" whose driver is libusbx, and oemxx.inf generated in
> windows/system32/inf
> (something happened in this step make win 7 to choose libusbx as its
> driver)

Hi,

Seems like a usbclerk problem ==> not removing the WinUSB driver upon
client distconnect
- What are the versions of usbclerk, virt-viewer ?

----------------------------------------------------------------------

virt-viewer 0.5.7,  the version of usbclerk  not clear (cody provides)

----------------------------------------------------------------------

- Anything interesting in usbclerk's log (try at
c:\windows\temp\usbclerk.log) ?

----------------------------------------------------------------------

3608::INFO::2014-10-23 10:31:32,719::USBClerk::dispatch_message::Installing winusb driver for 0930:6544

3608::INFO::2014-10-23 10:31:32,735::USBClerk::install_winusb_driver::Looking for device vid:pid 0930:6544

3608::INFO::2014-10-23 10:31:32,735::USBClerk::install_winusb_driver::Device 0930:6544 found

3608::INFO::2014-10-23 10:31:32,735::USBClerk::install_winusb_driver::Installing driver for USB device: "DataTraveler 2.0" (0930:6544) inf: usb_device_0930_6544.inf

3608::INFO::2014-10-23 10:31:37,802::USBClerk::dispatch_message::Completed successfully

3608::INFO::2014-10-23 10:31:48,793::USBClerk::remove_winusb_driver::WinUSB driver is not installed

****correct log is:

960::INFO::2014-10-23 10:36:11,585::USBClerk::dispatch_message::Installing winusb driver for 1f75:0916

960::INFO::2014-10-23 10:36:11,601::USBClerk::install_winusb_driver::Looking for device vid:pid 1f75:0916

960::INFO::2014-10-23 10:36:11,601::USBClerk::install_winusb_driver::Device 1f75:0916 found

960::INFO::2014-10-23 10:36:11,601::USBClerk::install_winusb_driver::Installing driver for USB device: "" (1f75:0916) inf: usb_device_1f75_0916.inf

960::INFO::2014-10-23 10:36:16,069::USBClerk::dispatch_message::Completed successfully

960::INFO::2014-10-23 10:36:36,389::USBClerk::remove_winusb_driver::Removing 1f75:0916

960::INFO::2014-10-23 10:36:36,436::USBClerk::uninstall_inf::Uninstalling inf: C:\Windows\INF\oem22.inf

****(**1. teclast usb device recognize as an unknown "universal serial bus device", but kinston is correctly recognize as itself

            2.oem22.inf is similar to inf i've posted except the section "strings")

----------------------------------------------------------------------
- Older versions of usbclerk did not remove the driver upon client
disconnect, can
   you try un-redirect the usb device (from the remote-viewer menu)
before disconnecting the client ?

----------------------------------------------------------------------
already tried, all turn out to the same result

----------------------------------------------------------------------
Uri

_______________________________________________
Spice-devel mailing list
Spice-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/spice-devel