On 2024-11-25 09:01:33 [-0800], Guenter Roeck wrote:
> Unfortunately it doesn't make a difference.
stunning. It looks like the exact same error message.
> [ 1.050499] =============================
> [ 1.050801] [ BUG: Invalid wait context ]
> [ 1.051200] 6.12.0+ #1 Not tainted
> [ 1.051571] -----------------------------
> [ 1.051875] swapper/0/1 is trying to lock:
> [ 1.052201] 0000000001b694c8 (pci_poke_lock){....}-{3:3}, at: pci_config_read16+0x8/0x80
> [ 1.052994] other info that might help us debug this:
> [ 1.053331] context-{5:5}
> [ 1.053641] 2 locks held by swapper/0/1:
> [ 1.053959] #0: fffff800042b50f8 (&dev->mutex){....}-{4:4}, at: __driver_attach+0x80/0x160
> [ 1.054388] #1: 0000000001d29078 (pci_lock){....}-{2:2}, at: pci_bus_read_config_word+0x18/0x80
> [ 1.054793] stack backtrace:
> [ 1.055171] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0+ #1
> [ 1.055632] Call Trace:
> [ 1.055985] [<00000000004e31d0>] __lock_acquire+0xa50/0x3160
> [ 1.056329] [<00000000004e63e8>] lock_acquire+0xe8/0x340
> [ 1.056645] [<00000000010f0dfc>] _raw_spin_lock_irqsave+0x3c/0x80
> [ 1.056966] [<0000000000443828>] pci_config_read16+0x8/0x80
> [ 1.057278] [<000000000044442c>] sun4u_read_pci_cfg+0x12c/0x1a0
> [ 1.057593] [<0000000000b7657c>] pci_bus_read_config_word+0x3c/0x80
> [ 1.057913] [<0000000000b7fa78>] pci_find_capability+0x18/0xa0
> [ 1.058228] [<0000000000b794b0>] set_pcie_port_type+0x10/0x160
> [ 1.058543] [<0000000000442a98>] pci_of_scan_bus+0x158/0xb00
> [ 1.058854] [<00000000010c74a0>] pci_scan_one_pbm+0xd0/0xf8
> [ 1.059167] [<0000000000446174>] sabre_probe+0x1f4/0x5c0
> [ 1.059476] [<0000000000c13a48>] platform_probe+0x28/0x80
> [ 1.059785] [<0000000000c11158>] really_probe+0xb8/0x340
> [ 1.060098] [<0000000000c11584>] driver_probe_device+0x24/0xe0
> [ 1.060413] [<0000000000c117ac>] __driver_attach+0x8c/0x160
> [ 1.060728] [<0000000000c0ef54>] bus_for_each_dev+0x54/0xc0
>
> The original call trace also included _raw_spin_lock_irqsave(), and
> I don't have CONFIG_PREEMPT_RT enabled in my sparc64 builds to start with.
You don't have to. "CONFIG_PROVE_RAW_LOCK_NESTING" looks if you try to
acquire raw_spinlock_t -> spinlock_t. Which it did before I made the
patch.
The pci_lock is from drivers/pci/access.c and is defined as
raw_spinlock_t. And I made pci_poke_lock of the same time. But debug
says 3:3 which suggests LD_WAIT_CONFIG. (No patch applied).
> FWIW, I don't understand the value of
> pr_warn("context-{%d:%d}\n", curr_inner, curr_inner);
> Why print curr_inner twice ?
The syntax was once (or is) inner:outer. If you look from the top, you
have 4 (mutex_t) followed pci_lock (the raw_spinlock_t) 2. You are at
level 2 now and try to acquire spin_lock_t (3).
> Thanks,
> Guenter
Sebastian
