Re: [PATCH 00/17] mm: introduce numa_memblks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 19, 2024 at 02:33:47PM +0100, Jonathan Cameron wrote:
> On Tue, 16 Jul 2024 14:13:29 +0300
> Mike Rapoport <rppt@xxxxxxxxxx> wrote:
> 
> > From: "Mike Rapoport (Microsoft)" <rppt@xxxxxxxxxx>
> > 
> > Hi,
> > 
> > Following the discussion about handling of CXL fixed memory windows on
> > arm64 [1] I decided to bite the bullet and move numa_memblks from x86 to
> > the generic code so they will be available on arm64/riscv and maybe on
> > loongarch sometime later.
> > 
> > While it could be possible to use memblock to describe CXL memory windows,
> > it currently lacks notion of unpopulated memory ranges and numa_memblks
> > does implement this.
> > 
> > Another reason to make numa_memblks generic is that both arch_numa (arm64
> > and riscv) and loongarch use trimmed copy of x86 code although there is no
> > fundamental reason why the same code cannot be used on all these platforms.
> > Having numa_memblks in mm/ will make it's interaction with ACPI and FDT
> > more consistent and I believe will reduce maintenance burden.
> > 
> > And with generic numa_memblks it is (almost) straightforward to enable NUMA
> > emulation on arm64 and riscv.
> > 
> > The first 5 commits in this series are cleanups that are not strictly
> > related to numa_memblks.
> > 
> > Commits 6-11 slightly reorder code in x86 to allow extracting numa_memblks
> > and NUMA emulation to the generic code.
> > 
> > Commits 12-14 actually move the code from arch/x86/ to mm/ and commit 15
> > does some aftermath cleanups.
> > 
> > Commit 16 switches arch_numa to numa_memblks.
> > 
> > Commit 17 enables usage of phys_to_target_node() and
> > memory_add_physaddr_to_nid() with numa_memblks.
> 
> Hi Mike,
> 
> I've lightly tested with emulated CXL + Generic Ports and Generic
> Initiators as well as more normal cpus and memory via qemu on arm64 and it's
> looking good.
> 
> From my earlier series, patch 4 is probably still needed to avoid
> presenting nodes with nothing in them at boot (but not if we hotplug
> memory then remove it again in which case they disappear)
> https://lore.kernel.org/all/20240529171236.32002-5-Jonathan.Cameron@xxxxxxxxxx/
> However that was broken/inconsistent before your rework so I can send that
> patch separately. 

I'd appreciate it :)
 
> Thanks for getting this sorted!  I should get time to do more extensive
> testing and review in next week or so.

Thanks, you may want to wait for v2, I'm planning to send it this week.
 
> Jonathan
> 
> > 
> > [1] https://lore.kernel.org/all/20240529171236.32002-1-Jonathan.Cameron@xxxxxxxxxx/
> > 
> > Mike Rapoport (Microsoft) (17):
> >   mm: move kernel/numa.c to mm/
> >   MIPS: sgi-ip27: make NODE_DATA() the same as on all other
> >     architectures
> >   MIPS: loongson64: rename __node_data to node_data
> >   arch, mm: move definition of node_data to generic code
> >   arch, mm: pull out allocation of NODE_DATA to generic code
> >   x86/numa: simplify numa_distance allocation
> >   x86/numa: move FAKE_NODE_* defines to numa_emu
> >   x86/numa_emu: simplify allocation of phys_dist
> >   x86/numa_emu: split __apicid_to_node update to a helper function
> >   x86/numa_emu: use a helper function to get MAX_DMA32_PFN
> >   x86/numa: numa_{add,remove}_cpu: make cpu parameter unsigned
> >   mm: introduce numa_memblks
> >   mm: move numa_distance and related code from x86 to numa_memblks
> >   mm: introduce numa_emulation
> >   mm: make numa_memblks more self-contained
> >   arch_numa: switch over to numa_memblks
> >   mm: make range-to-target_node lookup facility a part of numa_memblks
> > 
> >  arch/arm64/include/asm/Kbuild                 |   1 +
> >  arch/arm64/include/asm/mmzone.h               |  13 -
> >  arch/arm64/include/asm/topology.h             |   1 +
> >  arch/loongarch/include/asm/Kbuild             |   1 +
> >  arch/loongarch/include/asm/mmzone.h           |  16 -
> >  arch/loongarch/include/asm/topology.h         |   1 +
> >  arch/loongarch/kernel/numa.c                  |  21 -
> >  arch/mips/include/asm/mach-ip27/mmzone.h      |   1 -
> >  .../mips/include/asm/mach-loongson64/mmzone.h |   4 -
> >  arch/mips/loongson64/numa.c                   |  20 +-
> >  arch/mips/sgi-ip27/ip27-memory.c              |   2 +-
> >  arch/powerpc/include/asm/mmzone.h             |   6 -
> >  arch/powerpc/mm/numa.c                        |  26 +-
> >  arch/riscv/include/asm/Kbuild                 |   1 +
> >  arch/riscv/include/asm/mmzone.h               |  13 -
> >  arch/riscv/include/asm/topology.h             |   4 +
> >  arch/s390/include/asm/Kbuild                  |   1 +
> >  arch/s390/include/asm/mmzone.h                |  17 -
> >  arch/s390/kernel/numa.c                       |   3 -
> >  arch/sh/include/asm/mmzone.h                  |   3 -
> >  arch/sh/mm/init.c                             |   7 +-
> >  arch/sh/mm/numa.c                             |   3 -
> >  arch/sparc/include/asm/mmzone.h               |   4 -
> >  arch/sparc/mm/init_64.c                       |  11 +-
> >  arch/x86/Kconfig                              |   9 +-
> >  arch/x86/include/asm/Kbuild                   |   1 +
> >  arch/x86/include/asm/mmzone.h                 |   6 -
> >  arch/x86/include/asm/mmzone_32.h              |  17 -
> >  arch/x86/include/asm/mmzone_64.h              |  18 -
> >  arch/x86/include/asm/numa.h                   |  24 +-
> >  arch/x86/include/asm/sparsemem.h              |   9 -
> >  arch/x86/mm/Makefile                          |   1 -
> >  arch/x86/mm/amdtopology.c                     |   1 +
> >  arch/x86/mm/numa.c                            | 618 +-----------------
> >  arch/x86/mm/numa_internal.h                   |  24 -
> >  drivers/acpi/numa/srat.c                      |   1 +
> >  drivers/base/Kconfig                          |   1 +
> >  drivers/base/arch_numa.c                      | 223 ++-----
> >  drivers/cxl/Kconfig                           |   2 +-
> >  drivers/dax/Kconfig                           |   2 +-
> >  drivers/of/of_numa.c                          |   1 +
> >  include/asm-generic/mmzone.h                  |   5 +
> >  include/asm-generic/numa.h                    |   6 +-
> >  include/linux/numa.h                          |   5 +
> >  include/linux/numa_memblks.h                  |  58 ++
> >  kernel/Makefile                               |   1 -
> >  kernel/numa.c                                 |  26 -
> >  mm/Kconfig                                    |  11 +
> >  mm/Makefile                                   |   3 +
> >  mm/numa.c                                     |  57 ++
> >  {arch/x86/mm => mm}/numa_emulation.c          |  42 +-
> >  mm/numa_memblks.c                             | 565 ++++++++++++++++
> >  52 files changed, 847 insertions(+), 1070 deletions(-)
> >  delete mode 100644 arch/arm64/include/asm/mmzone.h
> >  delete mode 100644 arch/loongarch/include/asm/mmzone.h
> >  delete mode 100644 arch/riscv/include/asm/mmzone.h
> >  delete mode 100644 arch/s390/include/asm/mmzone.h
> >  delete mode 100644 arch/x86/include/asm/mmzone.h
> >  delete mode 100644 arch/x86/include/asm/mmzone_32.h
> >  delete mode 100644 arch/x86/include/asm/mmzone_64.h
> >  create mode 100644 include/asm-generic/mmzone.h
> >  create mode 100644 include/linux/numa_memblks.h
> >  delete mode 100644 kernel/numa.c
> >  create mode 100644 mm/numa.c
> >  rename {arch/x86/mm => mm}/numa_emulation.c (94%)
> >  create mode 100644 mm/numa_memblks.c
> > 
> > 
> > base-commit: 22a40d14b572deb80c0648557f4bd502d7e83826
> 

-- 
Sincerely yours,
Mike.




[Index of Archives]     [Kernel Development]     [DCCP]     [Linux ARM Development]     [Linux]     [Photo]     [Yosemite Help]     [Linux ARM Kernel]     [Linux SCSI]     [Linux x86_64]     [Linux Hams]

  Powered by Linux