Re: [RFC PATCH 00/14] Introducing TIF_NOTIFY_IPI flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Vincent,

Thank you for taking a look at the series.

On 3/6/2024 3:29 PM, Vincent Guittot wrote:
> Hi Prateek,
> 
> Adding Julia who could be interested in this patchset. Your patchset
> should trigger idle load balance instead of newly idle load balance
> now when the polling is used. This was one reason for not migrating
> task in idle CPU

Thank you.

> 
> On Tue, 20 Feb 2024 at 18:15, K Prateek Nayak <kprateek.nayak@xxxxxxx> wrote:
>>
>> Hello everyone,
>>
>> [..snip..]
>>
>>
>> Skipping newidle_balance()
>> ==========================
>>
>> In an earlier attempt to solve the challenge of the long IRQ disabled
>> section, newidle_balance() was skipped when a CPU waking up from idle
>> was found to have no runnable tasks, and was transitioning back to
>> idle [2]. Tim [3] and David [4] had pointed out that newidle_balance()
>> may be viable for CPUs that are idling with tick enabled, where the
>> newidle_balance() has the opportunity to pull tasks onto the idle CPU.
>>
>> Vincent [5] pointed out a case where the idle load kick will fail to
>> run on an idle CPU since the IPI handler launching the ILB will check
>> for need_resched(). In such cases, the idle CPU relies on
>> newidle_balance() to pull tasks towards itself.
> 
> Calling newidle_balance() instead of the normal idle load balance
> prevents the CPU to pull tasks from other groups

Thank you for the correction.

> 
>>
>> Using an alternate flag instead of NEED_RESCHED to indicate a pending
>> IPI was suggested as the correct approach to solve this problem on the
>> same thread.
>>
>>
>> Proposed solution: TIF_NOTIFY_IPI
>> =================================
>>
>> Instead of reusing TIF_NEED_RESCHED bit to pull an TIF_POLLING CPU out
>> of idle, TIF_NOTIFY_IPI is a newly introduced flag that
>> call_function_single_prep_ipi() sets on a target TIF_POLLING CPU to
>> indicate a pending IPI, which the idle CPU promises to process soon.
>>
>> On architectures that do not support the TIF_NOTIFY_IPI flag (this
>> series only adds support for x86 and ARM processors for now),
> 
> I'm surprised that you are mentioning ARM processors because they
> don't use TIF_POLLING.

Yup I just realised that after Linus Walleij pointed it out on the
thread.

> 
>> call_function_single_prep_ipi() will fallback to setting
>> TIF_NEED_RESCHED bit to pull the TIF_POLLING CPU out of idle.
>>
>> Since the pending IPI handlers are processed before the call to
>> schedule_idle() in do_idle(), schedule_idle() will only be called if the
>> IPI handler have woken / migrated a new task on the idle CPU and has set
>> TIF_NEED_RESCHED bit to indicate the same. This avoids running into the
>> long IRQ disabled section in schedule_idle() unnecessarily, and any
>> need_resched() check within a call function will accurately notify if a
>> task is waiting for CPU time on the CPU handling the IPI.
>>
>> Following is the crude visualization of how the situation changes with
>> the newly introduced TIF_NOTIFY_IPI flag:
>> --
>> CPU0                                                    CPU1
>> ====                                                    ====
>>                                                         do_idle() {
>>                                                                 __current_set_polling();
>>                                                                 ...
>>                                                                 monitor(addr);
>>                                                                 if (!need_resched_or_ipi())
>>                                                                         mwait() {
>>                                                                         /* Waiting */
>> smp_call_function_single(CPU1, func, wait = 1) {                                ...
>>         ...                                                                     ...
>>         set_nr_if_polling(CPU1) {                                               ...
>>                 /* Realizes CPU1 is polling */                                  ...
>>                 try_cmpxchg(addr,                                               ...
>>                             &val,                                               ...
>>                             val | _TIF_NOTIFY_IPI);                             ...
>>         } /* Does not send an IPI */                                            ...
>>         ...                                                             } /* mwait exit due to write at addr */
>>         csd_lock_wait() {                                       ...
>>         /* Waiting */                                           preempt_fold_need_resched(); /* fold if NEED_RESCHED */
>>                 ...                                             __current_clr_polling();
>>                 ...                                             flush_smp_call_function_queue() {
>>                 ...                                                     func(); /* Will set NEED_RESCHED if sched_ttwu_pending() */
>>         } /* End of wait */                                     }
>> }                                                               if (need_resched()) {
>>                                                                         schedule_idle();
>> smp_call_function_single(CPU1, func, wait = 1) {                }
>>         ...                                                     ... /* IRQs remain enabled */
>>         arch_send_call_function_single_ipi(CPU1); ----------->  /* Processes the IPI */
>> --
>>
>> Results
>> =======
>>
>> With the TIF_NOTIFY_IPI, the time taken to complete a fixed set of IPIs
>> using ipistorm improves drastically. Following are the numbers from the
>> same dual socket 3rd Generation EPYC system (2 x 64C/128T) (boost on,
>> C2 disabled) running ipistorm between CPU8 and CPU16:
>>
>> cmdline: insmod ipistorm.ko numipi=100000 single=1 offset=8 cpulist=8 wait=1
>>
>>   ==================================================================
>>   Test          : ipistorm (modified)
>>   Units         : Normalized runtime
>>   Interpretation: Lower is better
>>   Statistic     : AMean
>>   ==================================================================
>>   kernel:                               time [pct imp]
>>   tip:sched/core                        1.00 [0.00]
>>   tip:sched/core + revert               0.81 [19.36]
>>   tip:sched/core + TIF_NOTIFY_IPI       0.20 [80.99]
>>
>> Same experiment was repeated on an dual socket ARM server (2 x 64C)
>> which too saw a significant improvement in the ipistorm performance:
> 
> Could you share more details about this ARM server ? Could it be an Arm64 one ?
> I was not expecting any change for arm/arm64 which are not using TIF_POLLING

I looked at the lscpu output and it said It was an "aarch64" server with
model name "Neoverse-N1". Let me go back and test it once again just to
be sure I did not catch a one off behavior (Might be a while since I
have limited access to this machine) I'll also add a debug
WARN_ON_ONCE() to see if "TIF_NOTIF_IPI" is being set.

> 
> 
>>
>>   ==================================================================
>>   Test          : ipistorm (modified)
>>   Units         : Normalized runtime
>>   Interpretation: Lower is better
>>   Statistic     : AMean
>>   ==================================================================
>>   kernel:                               time [pct imp]
>>   tip:sched/core                        1.00 [0.00]
>>   tip:sched/core + TIF_NOTIFY_IPI       0.41 [59.29]
>>
>> netperf and tbench results with the patch match the results on tip on
>> the dual socket 3rd Generation AMD system (2 x 64C/128T). Additionally,
>> hackbench, stream, and schbench too were tested, with results from the
>> patched kernel matching that of the tip.
>>
>>
>> Future Work
>> ===========
>>
>> Evaluate impact of newidle_balance() when scheduler tick hits an idle
>> CPU. The call to newidle_balance() will be skipped with the
> 
> But it should call the normal idle load balance instead

Yup, but the frequency of normal idle balance will be lower than the
frequency at which a newidle balance is being triggered currently if
tick is not disabled right? Please correct me if I'm wrong. 

> 
>> TIF_NOTIFY_IPI solution similar to [2]. Counter argument for the case is
>> that if the idle state did not set the TIF_POLLING bit, the idle CPU
>> would not have called schedule_idle() unless the IPI handler set the
>> NEED_RESCHED bit.
>>
>>
>> Links
>> =====
>>
>> [1] https://github.com/antonblanchard/ipistorm
>> [2] https://lore.kernel.org/lkml/20240119084548.2788-1-kprateek.nayak@xxxxxxx/
>> [3] https://lore.kernel.org/lkml/b4f5ac150685456cf45a342e3bb1f28cdd557a53.camel@xxxxxxxxxxxxxxx/
>> [4] https://lore.kernel.org/lkml/20240123211756.GA221793@maniforge/
>> [5] https://lore.kernel.org/lkml/CAKfTPtC446Lo9CATPp7PExdkLhHQFoBuY-JMGC7agOHY4hs-Pw@xxxxxxxxxxxxxx/
>>
>> This series is based on tip:sched/core at tag "sched-core-2024-01-08".
>> [..snip..]
>>
 
--
Thanks and Regards,
Prateek




[Index of Archives]     [Kernel Development]     [DCCP]     [Linux ARM Development]     [Linux]     [Photo]     [Yosemite Help]     [Linux ARM Kernel]     [Linux SCSI]     [Linux x86_64]     [Linux Hams]

  Powered by Linux