Re: [bpf-next v2] bpf: drop deprecated bpf_jit_enable == 2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On Jan 17, 2023, at 3:30 PM, Christophe Leroy <christophe.leroy@xxxxxxxxxx> wrote:
> 
> 
> 
> Le 17/01/2023 à 06:30, Tonghao Zhang a écrit :
>> 
>> 
>>> On Jan 9, 2023, at 4:15 PM, Christophe Leroy <christophe.leroy@xxxxxxxxxx> wrote:
>>> 
>>> 
>>> 
>>> Le 06/01/2023 à 16:37, Daniel Borkmann a écrit :
>>>> On 1/5/23 6:53 PM, Christophe Leroy wrote:
>>>>> Le 05/01/2023 à 04:06, tong@xxxxxxxxxxxxx a écrit :
>>>>>> From: Tonghao Zhang <tong@xxxxxxxxxxxxx>
>>>>>> 
>>>>>> The x86_64 can't dump the valid insn in this way. A test BPF prog
>>>>>> which include subprog:
>>>>>> 
>>>>>> $ llvm-objdump -d subprog.o
>>>>>> Disassembly of section .text:
>>>>>> 0000000000000000 <subprog>:
>>>>>>          0:       18 01 00 00 73 75 62 70 00 00 00 00 72 6f 67 00 r1
>>>>>> = 29114459903653235 ll
>>>>>>          2:       7b 1a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r1
>>>>>>          3:       bf a1 00 00 00 00 00 00 r1 = r10
>>>>>>          4:       07 01 00 00 f8 ff ff ff r1 += -8
>>>>>>          5:       b7 02 00 00 08 00 00 00 r2 = 8
>>>>>>          6:       85 00 00 00 06 00 00 00 call 6
>>>>>>          7:       95 00 00 00 00 00 00 00 exit
>>>>>> Disassembly of section raw_tp/sys_enter:
>>>>>> 0000000000000000 <entry>:
>>>>>>          0:       85 10 00 00 ff ff ff ff call -1
>>>>>>          1:       b7 00 00 00 00 00 00 00 r0 = 0
>>>>>>          2:       95 00 00 00 00 00 00 00 exit
>>>>>> 
>>>>>> kernel print message:
>>>>>> [  580.775387] flen=8 proglen=51 pass=3 image=ffffffffa000c20c
>>>>>> from=kprobe-load pid=1643
>>>>>> [  580.777236] JIT code: 00000000: cc cc cc cc cc cc cc cc cc cc cc
>>>>>> cc cc cc cc cc
>>>>>> [  580.779037] JIT code: 00000010: cc cc cc cc cc cc cc cc cc cc cc
>>>>>> cc cc cc cc cc
>>>>>> [  580.780767] JIT code: 00000020: cc cc cc cc cc cc cc cc cc cc cc
>>>>>> cc cc cc cc cc
>>>>>> [  580.782568] JIT code: 00000030: cc cc cc
>>>>>> 
>>>>>> $ bpf_jit_disasm
>>>>>> 51 bytes emitted from JIT compiler (pass:3, flen:8)
>>>>>> ffffffffa000c20c + <x>:
>>>>>>      0:   int3
>>>>>>      1:   int3
>>>>>>      2:   int3
>>>>>>      3:   int3
>>>>>>      4:   int3
>>>>>>      5:   int3
>>>>>>      ...
>>>>>> 
>>>>>> Until bpf_jit_binary_pack_finalize is invoked, we copy rw_header to
>>>>>> header
>>>>>> and then image/insn is valid. BTW, we can use the "bpftool prog dump"
>>>>>> JITed instructions.
>>>>> 
>>>>> NACK.
>>>>> 
>>>>> Because the feature is buggy on x86_64, you remove it for all
>>>>> architectures ?
>>>>> 
>>>>> On powerpc bpf_jit_enable == 2 works and is very usefull.
>>>>> 
>>>>> Last time I tried to use bpftool on powerpc/32 it didn't work. I don't
>>>>> remember the details, I think it was an issue with endianess. Maybe it
>>>>> is fixed now, but it needs to be verified.
>>>>> 
>>>>> So please, before removing a working and usefull feature, make sure
>>>>> there is an alternative available to it for all architectures in all
>>>>> configurations.
>>>>> 
>>>>> Also, I don't think bpftool is usable to dump kernel BPF selftests.
>>>>> That's vital when a selftest fails if you want to have a chance to
>>>>> understand why it fails.
>>>> 
>>>> If this is actively used by JIT developers and considered useful, I'd be
>>>> ok to leave it for the time being. Overall goal is to reach feature parity
>>>> among (at least major arch) JITs and not just have most functionality only
>>>> available on x86-64 JIT. Could you however check what is not working with
>>>> bpftool on powerpc/32? Perhaps it's not too much effort to just fix it,
>>>> but details would be useful otherwise 'it didn't work' is too fuzzy.
>>> 
>>> Sure I will try to test bpftool again in the coming days.
>>> 
>>> Previous discussion about that subject is here:
>>> https://patchwork.kernel.org/project/linux-riscv/patch/20210415093250.3391257-1-Jianlin.Lv@xxxxxxx/#24176847=
>> Hi Christophe
>> Any progress? We discuss to deprecate the bpf_jit_enable == 2 in 2021, but bpftool can not run on powerpc.
>> Now can we fix this issue?
> 
> Hi Tong,
> 
> I have started to look at it but I don't have any fruitfull feedback yet.
> 
> In the meantime, were you able to confirm that bpftool can also be used 
> to dump jitted tests from test_bpf.ko module on x86_64 ? In that can you 
> tell me how to proceed ?
Now I do not test, but we can dump the insn after bpf_prog_select_runtime in test_bpf.ko. bpf_map_get_info_by_fd can copy the insn to userspace, but we can
dump them in test_bpf.ko in the same way.

> Thanks
> Christophe
> 
>>> 
>>>> 
>>>> Also, with regards to the last statement that bpftool is not usable to
>>>> dump kernel BPF selftests. Could you elaborate some more? I haven't used
>>>> bpf_jit_enable == 2 in a long time and for debugging always relied on
>>>> bpftool to dump xlated insns or JIT. Or do you mean by BPF selftests
>>>> the test_bpf.ko module? Given it has a big batch with kernel-only tests,
>>>> there I can see it's probably still useful.
>>> 
>>> Yes I mean test_bpf.ko
>>> 
>>> I used it as the test basis when I implemented eBPF for powerpc/32. And
>>> not so long ago it helped decover and fix a bug, see
>>> https://github.com/torvalds/linux/commit/89d21e259a94f7d5582ec675aa445f5a79f347e4
>>> 
>>>> 
>>>> Cheers,
>>>> Daniel




[Index of Archives]     [Kernel Development]     [DCCP]     [Linux ARM Development]     [Linux]     [Photo]     [Yosemite Help]     [Linux ARM Kernel]     [Linux SCSI]     [Linux x86_64]     [Linux Hams]

  Powered by Linux