Per file BOTH_EMPTY defines are littering our source code here and
there. Define once in serial.h and create helper for the check
too.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
arch/mips/ath79/early_printk.c | 9 +++++----
drivers/accessibility/speakup/serialio.h | 3 +--
drivers/tty/serial/8250/8250_early.c | 4 +---
drivers/tty/serial/8250/8250_port.c | 12 +++++-------
drivers/tty/serial/omap-serial.c | 7 +++----
drivers/tty/serial/pch_uart.c | 7 +++----
drivers/tty/serial/pxa.c | 5 ++---
drivers/tty/serial/sunsu.c | 4 +---
drivers/tty/serial/vr41xx_siu.c | 4 +---
include/linux/serial.h | 9 +++++++++
10 files changed, 31 insertions(+), 33 deletions(-)
diff --git a/arch/mips/ath79/early_printk.c b/arch/mips/ath79/early_printk.c
index 8751d067f98f..f6d02b425a10 100644
--- a/arch/mips/ath79/early_printk.c
+++ b/arch/mips/ath79/early_printk.c
@@ -8,6 +8,7 @@
#include <linux/io.h>
#include <linux/errno.h>
+#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <asm/addrspace.h>
#include <asm/setup.h>
@@ -29,15 +30,15 @@ static inline void prom_putchar_wait(void __iomem *reg, u32 mask, u32 val)
} while (1);
}
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
static void prom_putchar_ar71xx(char ch)
{
void __iomem *base = (void __iomem *)(KSEG1ADDR(AR71XX_UART_BASE));
- prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
+ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_BOTH_EMPTY,
+ UART_LSR_BOTH_EMPTY);
__raw_writel((unsigned char)ch, base + UART_TX * 4);
- prom_putchar_wait(base + UART_LSR * 4, BOTH_EMPTY, BOTH_EMPTY);
+ prom_putchar_wait(base + UART_LSR * 4, UART_LSR_BOTH_EMPTY,
+ UART_LSR_BOTH_EMPTY);
}
static void prom_putchar_ar933x(char ch)
diff --git a/drivers/accessibility/speakup/serialio.h b/drivers/accessibility/speakup/serialio.h
index 6f8f86f161bb..b4f9a1925b81 100644
--- a/drivers/accessibility/speakup/serialio.h
+++ b/drivers/accessibility/speakup/serialio.h
@@ -33,9 +33,8 @@ struct old_serial_port {
#define NUM_DISABLE_TIMEOUTS 3
/* buffer timeout in ms */
#define SPK_TIMEOUT 100
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
#define spk_serial_tx_busy() \
- ((inb(speakup_info.port_tts + UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+ (!uart_lsr_tx_empty(inb(speakup_info.port_tts + UART_LSR)))
#endif
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index e52585064565..f271becfc46c 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -84,8 +84,6 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value)
}
}
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
static void serial_putc(struct uart_port *port, unsigned char c)
{
unsigned int status;
@@ -94,7 +92,7 @@ static void serial_putc(struct uart_port *port, unsigned char c)
for (;;) {
status = serial8250_early_in(port, UART_LSR);
- if ((status & BOTH_EMPTY) == BOTH_EMPTY)
+ if (uart_lsr_tx_empty(status))
break;
cpu_relax();
}
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 432742a567b6..647bd351e611 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -50,8 +50,6 @@
#define DEBUG_AUTOCONF(fmt...) do { } while (0)
#endif
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
/*
* Here we define the default xmit fifo size used for each type of UART.
*/
@@ -1841,7 +1839,7 @@ void serial8250_tx_chars(struct uart_8250_port *up)
if (uart_circ_empty(xmit))
break;
if ((up->capabilities & UART_CAP_HFIFO) &&
- (serial_in(up, UART_LSR) & BOTH_EMPTY) != BOTH_EMPTY)
+ !uart_lsr_tx_empty(serial_in(up, UART_LSR)))
break;
/* The BCM2835 MINI UART THRE bit is really a not-full bit. */
if ((up->capabilities & UART_CAP_MINI) &&
@@ -2001,7 +1999,7 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
serial8250_rpm_put(up);
- return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
+ return uart_lsr_tx_empty(lsr) ? TIOCSER_TEMT : 0;
}
unsigned int serial8250_do_get_mctrl(struct uart_port *port)
@@ -2149,7 +2147,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
else
serial_port_out(port, UART_IER, 0);
- wait_for_xmitr(up, BOTH_EMPTY);
+ wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
/*
* Send the character out.
*/
@@ -2159,7 +2157,7 @@ static void serial8250_put_poll_char(struct uart_port *port,
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(up, BOTH_EMPTY);
+ wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
serial_port_out(port, UART_IER, ier);
serial8250_rpm_put(up);
}
@@ -3429,7 +3427,7 @@ void serial8250_console_write(struct uart_8250_port *up, const char *s,
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(up, BOTH_EMPTY);
+ wait_for_xmitr(up, UART_LSR_BOTH_EMPTY);
if (em485) {
mdelay(port->rs485.delay_rts_after_send);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 98622c35d896..52cb1a68b053 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
+#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/delay.h>
#include <linux/slab.h>
@@ -1102,8 +1103,6 @@ serial_omap_type(struct uart_port *port)
return up->name;
}
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up)
{
unsigned int status, tmout = 10000;
@@ -1118,7 +1117,7 @@ static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up)
if (--tmout == 0)
break;
udelay(1);
- } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+ } while (!uart_lsr_tx_empty(status));
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
@@ -1186,7 +1185,7 @@ static void omap_serial_early_putc(struct uart_port *port, unsigned char c)
for (;;) {
status = omap_serial_early_in(port, UART_LSR);
- if ((status & BOTH_EMPTY) == BOTH_EMPTY)
+ if (uart_lsr_tx_empty(status))
break;
cpu_relax();
}
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 3b26524d48e3..8a9065e4a903 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -3,6 +3,7 @@
*Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
*/
#include <linux/kernel.h>
+#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -189,8 +190,6 @@ enum {
#define PCH_UART_HAL_LOOP (PCH_UART_MCR_LOOP)
#define PCH_UART_HAL_AFE (PCH_UART_MCR_AFE)
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */
#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
@@ -1516,7 +1515,7 @@ static void pch_uart_put_poll_char(struct uart_port *port,
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(priv, BOTH_EMPTY);
+ wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
iowrite8(ier, priv->membase + UART_IER);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1602,7 +1601,7 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
* Finally, wait for transmitter to become empty
* and restore the IER
*/
- wait_for_xmitr(priv, BOTH_EMPTY);
+ wait_for_xmitr(priv, UART_LSR_BOTH_EMPTY);
iowrite8(ier, priv->membase + UART_IER);
if (port_locked)
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index e80ba8e10407..9309ffd87c8e 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -23,6 +23,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
+#include <linux/serial.h>
#include <linux/serial_reg.h>
#include <linux/circ_buf.h>
#include <linux/delay.h>
@@ -575,8 +576,6 @@ static struct uart_driver serial_pxa_reg;
#ifdef CONFIG_SERIAL_PXA_CONSOLE
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
/*
* Wait for transmitter & holding register to empty
*/
@@ -594,7 +593,7 @@ static void wait_for_xmitr(struct uart_pxa_port *up)
if (--tmout == 0)
break;
udelay(1);
- } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+ } while (!uart_lsr_tx_empty(status));
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index fff50b5b82eb..84d545e5a8c7 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1249,8 +1249,6 @@ static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
/*
* Wait for transmitter & holding register to empty
*/
@@ -1268,7 +1266,7 @@ static void wait_for_xmitr(struct uart_sunsu_port *up)
if (--tmout == 0)
break;
udelay(1);
- } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
+ } while (!uart_lsr_tx_empty(status));
/* Wait up to 1s for flow control if necessary */
if (up->port.flags & UPF_CONS_FLOW) {
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index e0bf003ca3a1..1ba689a81abd 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -703,8 +703,6 @@ static int siu_init_ports(struct platform_device *pdev)
#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
static void wait_for_xmitr(struct uart_port *port)
{
int timeout = 10000;
@@ -715,7 +713,7 @@ static void wait_for_xmitr(struct uart_port *port)
if (lsr & UART_LSR_BI)
lsr_break_flag[port->line] = UART_LSR_BI;
- if ((lsr & BOTH_EMPTY) == BOTH_EMPTY)
+ if (uart_lsr_tx_empty(lsr))
break;
} while (timeout-- > 0);
diff --git a/include/linux/serial.h b/include/linux/serial.h
index 70a9866e4abb..3d6fe3ef92cf 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -10,10 +10,19 @@
#define _LINUX_SERIAL_H
#include <uapi/linux/serial.h>
+#include <uapi/linux/serial_reg.h>
/* Helper for dealing with UART_LCR_WLEN* defines */
#define UART_LCR_WLEN(x) ((x) - 5)
+/* FIFO and shifting register empty */
+#define UART_LSR_BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline bool uart_lsr_tx_empty(u16 lsr)
+{
+ return (lsr & UART_LSR_BOTH_EMPTY) == UART_LSR_BOTH_EMPTY;
+}
+
/*
* Counters of the input lines (CTS, DSR, RI, CD) interrupts
*/
--
2.30.2
