[PATCH v4 5/5] signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>

With the addition of ssi_perf_data and ssi_perf_type struct signalfd_siginfo
is dangerously close to running out of space.  All that remains is just
enough space for two additional 64bit fields.  A practice of adding all
possible siginfo_t fields into struct singalfd_siginfo can not be supported
as adding the missing fields ssi_lower, ssi_upper, and ssi_pkey would
require two 64bit fields and one 32bit fields.  In practice the fields
ssi_perf_data and ssi_perf_type can never be used by signalfd as the signal
that generates them always delivers them synchronously to the thread that
triggers them.

Therefore until someone actually needs the fields ssi_perf_data and
ssi_perf_type in signalfd_siginfo remove them.  This leaves a bit more room
for future expansion.

v1: https://lkml.kernel.org/r/20210503203814.25487-12-ebiederm@xxxxxxxxxxxx
v2: https://lkml.kernel.org/r/20210505141101.11519-12-ebiederm@xxxxxxxxxxxx
Reviewed-by: Marco Elver <elver@xxxxxxxxxx>
Signed-off-by: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
---
 fs/signalfd.c                 | 16 ++++++----------
 include/uapi/linux/signalfd.h |  4 +---
 2 files changed, 7 insertions(+), 13 deletions(-)

diff --git a/fs/signalfd.c b/fs/signalfd.c
index 373df2f12415..167b5889db4b 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -114,12 +114,13 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
 		break;
 	case SIL_FAULT_BNDERR:
 	case SIL_FAULT_PKUERR:
+	case SIL_PERF_EVENT:
 		/*
-		 * Fall through to the SIL_FAULT case.  Both SIL_FAULT_BNDERR
-		 * and SIL_FAULT_PKUERR are only generated by faults that
-		 * deliver them synchronously to userspace.  In case someone
-		 * injects one of these signals and signalfd catches it treat
-		 * it as SIL_FAULT.
+		 * Fall through to the SIL_FAULT case.  SIL_FAULT_BNDERR,
+		 * SIL_FAULT_PKUERR, and SIL_PERF_EVENT are only
+		 * generated by faults that deliver them synchronously to
+		 * userspace.  In case someone injects one of these signals
+		 * and signalfd catches it treat it as SIL_FAULT.
 		 */
 	case SIL_FAULT:
 		new.ssi_addr = (long) kinfo->si_addr;
@@ -132,11 +133,6 @@ static int signalfd_copyinfo(struct signalfd_siginfo __user *uinfo,
 		new.ssi_addr = (long) kinfo->si_addr;
 		new.ssi_addr_lsb = (short) kinfo->si_addr_lsb;
 		break;
-	case SIL_PERF_EVENT:
-		new.ssi_addr = (long) kinfo->si_addr;
-		new.ssi_perf_type = kinfo->si_perf_type;
-		new.ssi_perf_data = kinfo->si_perf_data;
-		break;
 	case SIL_CHLD:
 		new.ssi_pid    = kinfo->si_pid;
 		new.ssi_uid    = kinfo->si_uid;
diff --git a/include/uapi/linux/signalfd.h b/include/uapi/linux/signalfd.h
index e78dddf433fc..83429a05b698 100644
--- a/include/uapi/linux/signalfd.h
+++ b/include/uapi/linux/signalfd.h
@@ -39,8 +39,6 @@ struct signalfd_siginfo {
 	__s32 ssi_syscall;
 	__u64 ssi_call_addr;
 	__u32 ssi_arch;
-	__u32 ssi_perf_type;
-	__u64 ssi_perf_data;
 
 	/*
 	 * Pad strcture to 128 bytes. Remember to update the
@@ -51,7 +49,7 @@ struct signalfd_siginfo {
 	 * comes out of a read(2) and we really don't want to have
 	 * a compat on read(2).
 	 */
-	__u8 __pad[16];
+	__u8 __pad[28];
 };
 
 
-- 
2.30.1




[Index of Archives]     [Kernel Development]     [DCCP]     [Linux ARM Development]     [Linux]     [Photo]     [Yosemite Help]     [Linux ARM Kernel]     [Linux SCSI]     [Linux x86_64]     [Linux Hams]

  Powered by Linux