> On 2014-11-14 15:59, Meelis Roos wrote: > > > > > The second oops is in blk_mq_map_queue() which is a trivial > > > > > two level cpu lookup. I wonder if there's something odd about > > > > > cpu numbers on these big old sparc systems? > > > > > > > > CPU numbers are sparse - they are determined by hardware slot number and > > > > some models only fill every other mainboard slot, and first slots can be > > > > free. I have first board offline and currently have CPUs numbered > > > > 10,11,14,15 online. > > > > > > > > Here is debug with Jens's patch: > > > > > > > [ 133.971050] CPU 11: synchronized TICK with master CPU (last diff -1 > > > > cycles, maxerr 516 cycles) > > > > [ 133.975491] CPU 14: synchronized TICK with master CPU (last diff -3 > > > > cycles, maxerr 531 cycles) > > > > [ 133.979943] CPU 15: synchronized TICK with master CPU (last diff -3 > > > > cycles, maxerr 531 cycles) > > > > [ 133.980146] Brought up 4 CPUs > > > > > > So this looks like this might be the issue. On a scsi-mq disabled boot, > > > you have 4 CPUs, but how are they numbered? > > > > The numbers are always the same. > > I would hope so, my question was really on what CPU numbers you see. But I > guess that 10, 11, 14, and 15? Yes, I am always seeing these CPU number, sorry if I was unclear. > > But everything seems to be mapped to queue 0? > > As it should, scsi-mq only supports a single hw queue for now. > > > > We might need Christophs debug patch on top this to fully know... > > > > Applied it too, dmesg is below. Yes it does spam the log a lot, and over > > 9600bps console its' somewhat slow :) > > > > There is another detail to note -this server contains a faulty disk as > > sdc that times out spinup. I left it in the server because it helped to > > pinpoint and fix a previous error in esp scsi driver. This can be a > > factor here too - the error handling details. > > It could be. So we have tons of mappings from CPU10 to queue 0, but then we > see this: > > > [ 256.236742] cpu: 10 > > [ 256.236749] queue: 809119744 > > and it turns to crap. This is pretty weird. Try with this debug patch - get > rid of the other ones first. It should reduce your noise level too. Here it is. This time it booted up: [ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.2.29 2001/06/18 17:28' [ 0.000000] PROMLIB: Root node compatible: [ 0.000000] Linux version 3.18.0-rc4-00052-g04689e7-dirty (mroos@mandel) (gcc version 4.9.2 (Debian 4.9.2-1) ) #28 SMP Sat Nov 15 08:35:23 EET 2014 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlyprom0] enabled [ 0.000000] ARCH: SUN4U [ 0.000000] Ethernet address: 00:03:ba:12:70:5c [ 0.000000] MM: PAGE_OFFSET is 0xfffff80000000000 (max_phys_bits == 40) [ 0.000000] MM: VMALLOC [0x0000000100000000 --> 0x0000060000000000] [ 0.000000] MM: VMEMMAP [0x0000060000000000 --> 0x00000c0000000000] [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /central@1f,0/fhc@0,f8800000/zs@0,902000:a [ 0.000000] PROM: Built device tree with 92727 bytes of memory. [ 0.000000] Top of RAM: 0xffd16000, Total RAM: 0xff954000 [ 0.000000] Memory hole size: 3MB [ 0.000000] Allocated 16384 bytes for kernel page tables. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0xffd15fff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0xff84dfff] [ 0.000000] node 0: [mem 0xffc00000-0xffceffff] [ 0.000000] node 0: [mem 0xffd00000-0xffd15fff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xffd15fff] [ 0.000000] On node 0 totalpages: 523434 [ 0.000000] Normal zone: 4094 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 523434 pages, LIFO batch:15 [ 0.000000] Booting Linux... [ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,mul32,div32,v8plus] [ 0.000000] CPU CAPS: [vis] [ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff800ff400000 s13248 r8192 d35904 u1048576 [ 0.000000] pcpu-alloc: s13248 r8192 d35904 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 10 11 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519340 [ 0.000000] Kernel command line: root=/dev/sda2 ro ignore_loglevel [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 9, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 8, 2097152 bytes) [ 0.000000] Sorting __ex_table... [ 0.000000] Memory: 4142488K/4187472K available (3653K kernel code, 246K rwdata, 800K rodata, 184K init, 413K bss, 44984K reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=16, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:2048 nr_irqs:2048 1 [ 128.657527] clocksource: mult[2042108] shift[23] [ 128.712138] clockevent: mult[3f7ced91] shift[32] [ 128.767637] Console: colour dummy device 80x25 [ 128.820567] console [tty0] enabled [ 128.861144] bootconsole [earlyprom0] disabled [ 129.063420] Calibrating delay using timer specific routine.. 497.45 BogoMIPS (lpj=2487295) [ 129.063492] pid_max: default: 32768 minimum: 301 [ 129.063932] Mount-cache hash table entries: 8192 (order: 3, 65536 bytes) [ 129.063992] Mountpoint-cache hash table entries: 8192 (order: 3, 65536 bytes) [ 129.074872] CPU 11: synchronized TICK with master CPU (last diff -3 cycles, maxerr 521 cycles) [ 129.079309] CPU 14: synchronized TICK with master CPU (last diff -4 cycles, maxerr 533 cycles) [ 129.083754] CPU 15: synchronized TICK with master CPU (last diff -3 cycles, maxerr 537 cycles) [ 129.083960] Brought up 4 CPUs [ 129.086069] devtmpfs: initialized [ 129.169189] device-tree: Duplicate name in base, renamed to "fhc#1" [ 129.171764] device-tree: Duplicate name in base, renamed to "fhc#2" [ 129.174141] device-tree: Duplicate name in base, renamed to "counter-timer#1" [ 129.175629] NET: Registered protocol family 16 [ 129.192224] SYSIO: UPA portID ffffffff, at 000001c400000000 [ 129.202872] SYSIO: UPA portID ffffffff, at 000001c600000000 [ 129.258073] SCSI subsystem initialized [ 129.261020] /central/fhc@0,f8800000/eeprom@0,908000: Mostek regs at 0x1fff8908000 [ 129.262034] fhc: Board #1, Version[1] PartID[fa0] Manuf[3e] (Central) [ 129.262402] fhc: Board #5, Version[1] PartID[fa0] Manuf[3e] (JTAG Master) [ 129.262739] fhc: Board #7, Version[1] PartID[fa0] Manuf[3e] [ 129.263089] fhc: Board #1, Version[1] PartID[fa0] Manuf[3e] [ 129.263573] clock_board: Detected 4 slot Enterprise system. [ 129.264275] Switched to clocksource tick [ 129.287105] NET: Registered protocol family 2 [ 129.289511] TCP established hash table entries: 32768 (order: 5, 262144 bytes) [ 129.291157] TCP bind hash table entries: 32768 (order: 6, 524288 bytes) [ 129.294361] TCP: Hash tables configured (established 32768 bind 32768) [ 129.295126] TCP: reno registered [ 129.295217] UDP hash table entries: 2048 (order: 3, 65536 bytes) [ 129.295752] UDP-Lite hash table entries: 2048 (order: 3, 65536 bytes) [ 129.297087] NET: Registered protocol family 1 [ 129.301408] futex hash table entries: 1024 (order: 3, 65536 bytes) [ 129.301979] audit: initializing netlink subsys (disabled) [ 129.302250] audit: type=2000 audit(0.399:1): initialized [ 129.303580] HugeTLB registered 8 MB page size, pre-allocated 0 pages [ 129.340672] msgmni has been set to 8090 [ 129.343819] io scheduler noop registered [ 129.345018] io scheduler cfq registered (default) [ 129.554283] zs f005ddbc: ttyS0 at MMIO 0x1fff8902000 (irq = 2, base_baud = 307200) is a zs (ESCC) [ 129.554389] Console: ttyS0 (SunZilog zs0) [ 135.582986] console [ttyS0] enabled [ 135.625569] zs f005ddbc: ttyS1 at MMIO 0x1fff8902004 (irq = 2, base_baud = 307200) is a zs (ESCC) [ 135.939954] f005de94: Keyboard at MMIO 0x1fff8904000 (irq = 2) is a zs [ 136.016155] f005de94: Mouse at MMIO 0x1fff8904004 (irq = 2) is a zs [ 136.093730] esp: esp0, regs[1c738810000:1c738800000] irq[19] [ 136.159506] esp: esp0 is a FASHME, 40 MHz (ccf=0), SCSI ID 7 [ 139.234226] scsi host0: esp [ 139.267162] cpumap 0 -> 0 [ 139.269849] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0 [ 139.271492] TCP: cubic registered [ 139.273657] NET: Registered protocol family 10 [ 139.277211] NET: Registered protocol family 17 [ 139.296894] rtc-m48t59 rtc-m48t59.0: setting system clock to 2014-11-15 06:40:41 UTC (1416033641) [ 139.629273] cpumap 1 -> 0 [ 139.629280] cpumap 2 -> 0 [ 139.629285] cpumap 3 -> 0 [ 139.691925] scsi 0:0:0:0: Direct-Access HP 36.4G ST336706LC HP03 PQ: 0 ANSI: 2 [ 139.692013] scsi target0:0:0: Beginning Domain Validation [ 139.894927] scsi target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) [ 139.987643] scsi target0:0:0: Domain Validation skipping write tests [ 140.061731] scsi target0:0:0: Ending Domain Validation [ 140.123189] cpumap 0 -> 0 [ 140.154380] cpumap 1 -> 0 [ 140.185630] cpumap 2 -> 0 [ 140.216888] cpumap 3 -> 0 [ 140.252831] cpumap 0 -> 0 [ 140.282156] cpumap 1 -> 0 [ 140.313371] cpumap 2 -> 0 [ 140.344651] cpumap 3 -> 0 [ 140.380252] scsi 0:0:1:0: Direct-Access HP 36.4G ST336706LC HP03 PQ: 0 ANSI: 2 [ 140.475273] scsi target0:0:1: Beginning Domain Validation [ 140.555781] scsi target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) [ 140.648453] scsi target0:0:1: Domain Validation skipping write tests [ 140.722588] scsi target0:0:1: Ending Domain Validation [ 140.784042] cpumap 0 -> 0 [ 140.815239] cpumap 1 -> 0 [ 140.846492] cpumap 2 -> 0 [ 140.877744] cpumap 3 -> 0 [ 140.913616] cpumap 0 -> 0 [ 140.942897] cpumap 1 -> 0 [ 140.974151] cpumap 2 -> 0 [ 141.005415] cpumap 3 -> 0 [ 141.038765] scsi 0:0:2:0: Direct-Access IBM DDYS-T18350M S96H PQ: 0 ANSI: 3 [ 141.133748] scsi target0:0:2: Beginning Domain Validation [ 141.202518] scsi target0:0:2: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 15) [ 141.290542] scsi target0:0:2: Domain Validation skipping write tests [ 141.365189] scsi target0:0:2: Ending Domain Validation [ 141.429842] cpumap 0 -> 0 [ 141.459112] cpumap 1 -> 0 [ 141.490347] cpumap 2 -> 0 [ 141.521603] cpumap 3 -> 0 [ 141.787155] cpumap 0 -> 0 [ 141.816515] cpumap 1 -> 0 [ 141.847715] cpumap 2 -> 0 [ 141.878961] cpumap 3 -> 0 [ 142.144466] cpumap 0 -> 0 [ 142.173748] cpumap 1 -> 0 [ 142.204998] cpumap 2 -> 0 [ 142.236213] cpumap 3 -> 0 [ 142.501721] cpumap 0 -> 0 [ 142.530996] cpumap 1 -> 0 [ 142.562246] cpumap 2 -> 0 [ 142.593469] cpumap 3 -> 0 [ 142.858971] cpumap 0 -> 0 [ 142.888245] cpumap 1 -> 0 [ 142.919497] cpumap 2 -> 0 [ 142.950719] cpumap 3 -> 0 [ 143.216214] cpumap 0 -> 0 [ 143.245507] cpumap 1 -> 0 [ 143.276747] cpumap 2 -> 0 [ 143.307975] cpumap 3 -> 0 [ 143.573467] cpumap 0 -> 0 [ 143.602752] cpumap 1 -> 0 [ 143.634006] cpumap 2 -> 0 [ 143.665238] cpumap 3 -> 0 [ 143.930731] cpumap 0 -> 0 [ 143.960006] cpumap 1 -> 0 [ 143.991252] cpumap 2 -> 0 [ 144.022474] cpumap 3 -> 0 [ 144.287973] cpumap 0 -> 0 [ 144.317255] cpumap 1 -> 0 [ 144.348506] cpumap 2 -> 0 [ 144.379727] cpumap 3 -> 0 [ 144.645219] cpumap 0 -> 0 [ 144.674501] cpumap 1 -> 0 [ 144.705729] cpumap 2 -> 0 [ 144.736980] cpumap 3 -> 0 [ 145.002478] cpumap 0 -> 0 [ 145.031763] cpumap 1 -> 0 [ 145.063010] cpumap 2 -> 0 [ 145.094250] cpumap 3 -> 0 [ 145.359734] cpumap 0 -> 0 [ 145.389010] cpumap 1 -> 0 [ 145.420264] cpumap 2 -> 0 [ 145.451484] cpumap 3 -> 0 [ 145.720408] sd 0:0:0:0: [sda] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 145.810617] sd 0:0:0:0: [sda] Write Protect is off [ 145.866366] sd 0:0:0:0: [sda] Mode Sense: 9f 00 10 08 [ 145.926924] sd 0:0:1:0: [sdb] 71132960 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 146.018918] sd 0:0:2:0: [sdc] Spinning up disk... [ 146.019072] sd 0:0:1:0: [sdb] Write Protect is off [ 146.019096] sd 0:0:1:0: [sdb] Mode Sense: 9f 00 10 08 [ 146.073854] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 146.131174] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 146.404148] sda: sda1 sda2 sda3 sda4 [ 146.447900] sdb: unknown partition table [ 146.501349] sd 0:0:0:0: [sda] Attached SCSI disk [ 146.555295] sd 0:0:1:0: [sdb] Attached SCSI disk [ 147.404159] ....................................................................................................not responding... [ 247.424529] sd 0:0:2:0: [sdc] READ CAPACITY failed [ 247.479803] sd 0:0:2:0: [sdc] [ 247.517288] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 247.583978] sd 0:0:2:0: [sdc] [ 247.621487] Sense Key : Not Ready [current] [ 247.672493] sd 0:0:2:0: [sdc] [ 247.710046] Add. Sense: Logical unit not ready, cause not reportable [ 247.788409] sd 0:0:2:0: [sdc] Test WP failed, assume Write Enabled [ 247.861176] sd 0:0:2:0: [sdc] Asking for cache data failed [ 247.926063] sd 0:0:2:0: [sdc] Assuming drive cache: write through [ 248.001337] blk-mq: cpu 14 got queue 1828716544 [ 248.053686] cpu10 -> queue index 809119744 [ 248.104595] cpu11 -> queue index 0 [ 248.147313] cpu14 -> queue index 1828716544 [ 248.199394] cpu15 -> queue index 0 [ 248.244954] sd 0:0:2:0: [sdc] Spinning up disk... [ 249.303368] ................... [ 267.493441] random: nonblocking pool is initialized [ 268.563220] ................................................................................not responding... [ 348.383773] sd 0:0:2:0: [sdc] READ CAPACITY failed [ 348.439076] sd 0:0:2:0: [sdc] [ 348.476555] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 348.543248] sd 0:0:2:0: [sdc] [ 348.580741] Sense Key : Not Ready [current] [ 348.631756] sd 0:0:2:0: [sdc] [ 348.669310] Add. Sense: Logical unit not ready, cause not reportable [ 348.748978] sd 0:0:2:0: [sdc] Attached SCSI disk [ 348.810914] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 348.906307] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 349.041728] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 349.131526] VFS: Mounted root (ext4 filesystem) readonly on device 259:786432. [ 349.242025] devtmpfs: mounted [ 349.927938] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 350.086045] systemd[1]: Detected architecture 'sparc64'. [ 350.385323] systemd[1]: Failed to insert module 'autofs4' [ 350.460814] systemd[1]: Set hostname to <mandel>. [ 352.204460] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 352.387177] systemd[1]: Expecting device dev-ttyS0.device... [ 352.512831] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 352.603400] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 352.693400] systemd[1]: Starting Remote File Systems (Pre). [ 352.842767] systemd[1]: Reached target Remote File Systems (Pre). [ 352.914025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 353.010183] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 353.104676] systemd[1]: Starting Paths. [ 353.212753] systemd[1]: Reached target Paths. [ 353.263212] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 353.367306] systemd[1]: Failed to open /dev/autofs: No such file or directory [ 353.452596] systemd[1]: Failed to initialize automounter: No such file or directory [ 353.742762] systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point. [ 353.863849] systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state. [ 353.956648] systemd[1]: Starting Encrypted Volumes. [ 354.082748] systemd[1]: Reached target Encrypted Volumes. [ 354.145547] systemd[1]: Expecting device dev-disk-by\x2duuid-bea3cb0e\x2d50b4\x2d4f9a\x2db255\x2db30866bdf689.device... [ 354.372795] systemd[1]: Expecting device dev-disk-by\x2duuid-0cf86009\x2dcf54\x2d4c05\x2d8a82\x2d3d82b1abaea4.device... [ 354.602978] systemd[1]: Starting Root Slice. [ 354.712740] systemd[1]: Created slice Root Slice. [ 354.767279] systemd[1]: Starting User and Session Slice. [ 354.902743] systemd[1]: Created slice User and Session Slice. [ 354.969809] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 355.142749] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 355.224333] systemd[1]: Starting Delayed Shutdown Socket. [ 355.362742] systemd[1]: Listening on Delayed Shutdown Socket. [ 355.429792] systemd[1]: Starting Journal Socket (/dev/log). [ 355.572741] systemd[1]: Listening on Journal Socket (/dev/log). [ 355.641888] systemd[1]: Starting Syslog Socket. [ 355.762735] systemd[1]: Listening on Syslog Socket. [ 355.819422] systemd[1]: Starting udev Control Socket. [ 355.952735] systemd[1]: Listening on udev Control Socket. [ 356.015596] systemd[1]: Starting udev Kernel Socket. [ 356.142731] systemd[1]: Listening on udev Kernel Socket. [ 356.204633] systemd[1]: Starting Journal Socket. [ 356.322732] systemd[1]: Listening on Journal Socket. [ 356.380521] systemd[1]: Starting System Slice. [ 356.502739] systemd[1]: Created slice System Slice. [ 356.559420] systemd[1]: Starting File System Check on Root Device... [ 356.716999] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 356.862733] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 356.936192] systemd[1]: Starting system-getty.slice. [ 356.997330] systemd[1]: Created slice system-getty.slice. [ 357.061723] systemd[1]: Starting system-serial\x2dgetty.slice. [ 357.132826] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 357.208874] systemd[1]: Mounted Debug File System. [ 357.266022] systemd[1]: Mounting POSIX Message Queue File System... [ 357.441212] systemd[1]: Starting Load Kernel Modules... [ 357.541833] systemd[1]: Started Set Up Additional Binary Formats. [ 357.615056] systemd[1]: Mounting Huge Pages File System... [ 357.688167] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 357.804251] systemd[1]: Starting udev Coldplug all Devices... [ 357.878208] systemd[1]: Starting Journal Service... [ 357.941793] systemd[1]: Started Journal Service. [ 358.186398] loop: module loaded [ 358.384285] sunhme.c:v3.10 August 26, 2008 David S. Miller (davem@xxxxxxxxxxxxx) [ 358.474949] eth0: HAPPY MEAL (SBUS) 10/100baseT Ethernet 00:03:ba:12:70:5c [ 358.559366] eth1: Quattro HME slot 0 (SBUS) 10/100baseT Ethernet 08:00:20:9d:77:08 [ 358.651993] eth2: Quattro HME slot 1 (SBUS) 10/100baseT Ethernet 08:00:20:9d:77:09 [ 358.744833] eth3: Quattro HME slot 2 (SBUS) 10/100baseT Ethernet 08:00:20:9d:77:0a [ 358.838570] eth4: Quattro HME slot 3 (SBUS) 10/100baseT Ethernet 08:00:20:9d:77:0b [ 359.524274] systemd-udevd[85]: starting version 215 [ 360.528599] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 360.593588] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 360.655824] sd 0:0:2:0: Attached scsi generic sg2 type 0 [ 361.898324] Adding 1566328k swap on /dev/sda4. Priority:-1 extents:1 across:1566328k [ 362.420151] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 362.812832] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 362.915592] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 363.853445] systemd-journald[71]: Received request to flush runtime journal from PID 1 [ 368.852414] eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex. -- Meelis Roos (mroos@xxxxxxxx) -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
