On 25.08.2014 23:48, Meelis Roos wrote:
r100 init hangs in a different place. Original dmesg first, then my
instrumented dmesg (seems to get further):
The instrumented dmesg had a couple of my local test changes and was
bad now that I had ROM. Reverted them exept my readb changes (instead
of direct dereferences of iomapped space) and redid
logging to be more precise.
[drm] radeon kernel modesetting enabled.
PCI: Enabling device: (0000:02:02.0), cmd 82
[drm] initializing kernel modesetting (RV100 0x1002:0x5159 0x1002:0x0908).
[drm] register mmio base: 0x10000000
[drm] register mmio size: 32768
[drm:radeon_device_init] *ERROR* Unable to find PCI I/O BAR
This was still the unchanged kernel hanging.
Below is a new debug log to pinpoint the hang. It seems to hang in
r100_gfx_get_rptr but not on first try.
It's most likely hanging in readl() in r100_mm_rreg() then.
--
Earthling Michel Dänzer | http://www.amd.com
Libre software enthusiast | Mesa and X developer
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
