Re: Status update on sparc32 genirq support [Was: sparc32: genirq support]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> If you could send me your tips for building tftpboot images and stuff,
> it'd save me some time.

The userspace stuff I have is built with buildroot.
I used the attached configuration.

When building the kernel I use:

ROOTFS=/path/to/buildroot.git/output/images/rootfs.ext2
make ROOT_IMG=${ROOTFS} ARCH=sparc tftpboot.img

I then copy the final tftpboot.img to /var/lib/tftpboot/
as C0A800C8.SUN4M - this is the filename my sun4m box ask for.
I used tcpdump to check the name it requested.

I have rarp so my /etc/ethers define 
the relation between mac and IP like this:

08:00:20:05:38:d2       192.168.0.200


Initially my rarpd did not work.
I had to add following options:

# Do not check /tftpbootdir before response
OPTIONS="-v -e"

Until I realized this I uses

prom> boot net gateway-ip,,sun-ip

But it is much more convinient with rarp as I can then type "boot net".
And this is also default so I just turn on the box to boot it.

	Sam
#
# Automatically generated make config: don't edit
# Buildroot version: 2011.02-git-00192-g6527001
# Thu Dec 30 23:36:52 2010
#
BR2_HAVE_DOT_CONFIG=y
# BR2_arm is not set
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_i386 is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
BR2_sparc=y
# BR2_x86_64 is not set
# BR2_xtensa is not set
# BR2_sparc_v7 is not set
# BR2_sparc_cypress is not set
BR2_sparc_v8=y

#
# LEON SPARC needs gcc = 4.4.x
#
# BR2_sparc_sparchfleon is not set
# BR2_sparc_sparchfleonv8 is not set
# BR2_sparc_sparcsfleon is not set
# BR2_sparc_sparcsfleonv8 is not set
# BR2_sparc_supersparc is not set
# BR2_sparc_sparclite is not set
# BR2_sparc_f930 is not set
# BR2_sparc_f934 is not set
# BR2_sparc_hypersparc is not set
# BR2_sparc_sparclite86x is not set
# BR2_sparc_sparclet is not set
# BR2_sparc_tsc701 is not set
BR2_SPARC_TYPE="V8"
BR2_ARCH="sparc"
BR2_ENDIAN="BIG"
BR2_GCC_TARGET_TUNE="v8"

#
# Build options
#

#
# Commands
#
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_STAGING_DIR="$(BASE_DIR)/staging"

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/";
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/";
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu";
BR2_DEBIAN_MIRROR="http://ftp.debian.org";
BR2_JLEVEL=2
# BR2_CCACHE is not set
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_CTNG is not set

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_6_34 is not set
# BR2_KERNEL_HEADERS_2_6_35 is not set
BR2_KERNEL_HEADERS_2_6_36=y
# BR2_KERNEL_HEADERS_VERSION is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.36.2"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_30 is not set
BR2_UCLIBC_VERSION_0_9_31=y
# BR2_UCLIBC_VERSION_0_9_32 is not set
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.31"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.31.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_20 is not set
BR2_BINUTILS_VERSION_2_20_1=y
BR2_BINUTILS_VERSION="2.20.1"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_X is not set
# BR2_GCC_VERSION_4_4_X is not set
BR2_GCC_VERSION_4_5_X=y
# BR2_GCC_VERSION_SNAP is not set
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.5.2"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_OBJC is not set
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set

#
# Gdb Options
#

#
# Gdb debugger for the target needs WCHAR support in toolchain
#
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set
BR2_TOOLCHAIN_HAS_THREADS=y
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_NEEDS_GETTEXT=y
BR2_TARGET_OPTIMIZATION="-pipe"

#
# Toolchain Options
#
# BR2_TOOLCHAIN_BUILDROOT_LARGEFILE is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set
# BR2_TOOLCHAIN_BUILDROOT_WCHAR is not set
# BR2_TOOLCHAIN_BUILDROOT_LOCALE is not set
# BR2_TOOLCHAIN_BUILDROOT_PROGRAM_INVOCATION is not set
# BR2_TOOLCHAIN_BUILDROOT_CXX is not set
# BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_ELF2FLT is not set
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y

#
# System configuration
#
BR2_TARGET_GENERIC_HOSTNAME="buildroot"
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot"
# BR2_TARGET_GENERIC_GETTY is not set

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_16_X is not set
# BR2_BUSYBOX_VERSION_1_17_X is not set
BR2_BUSYBOX_VERSION_1_18_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.18.1"
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.17.x.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
# BR2_PACKAGE_CUSTOMIZE is not set

#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# alsa-utils requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_FLAC is not set

#
# ffmpeg requires a toolchain with LARGEFILE support
#

#
# gstreamer requires a toolchain with WCHAR support
#

#
# gst-ffmpeg requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBCDAUDIO is not set

#
# libdvdread requires a toolchain with LARGEFILE support
#

#
# libdvdnav requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set

#
# libmms requires a toolchain with WCHAR support
#

#
# libmpd requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set

#
# swfdec requires a toolchain with WCHAR and C++ support
#

#
# festival requires a toolchain with C++ support enabled
#

#
# taglib requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_TREMOR is not set

#
# Compressors and decompressors
#
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set

#
# Debugging, profiling and benchmark
#
# BR2_PACKAGE_DHRYSTONE is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_KEXEC is not set

#
# lmbench requires a toolchain with RPC support
#

#
# lsof requires a toolchain with RPC support
#
# BR2_PACKAGE_LTP_TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NETPERF is not set

#
# oprofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_WHETSTONE is not set

#
# Development tools
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set

#
# bison requires a toolchain with WCHAR support
#
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CCACHE is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FAKEROOT is not set
# BR2_PACKAGE_FLEX is not set

#
# native toolchain needs development files in target filesystem
#

#
# gettext requires a toolchain with WCHAR support
#
# BR2_PACKAGE_GMP is not set

#
# gperf requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_MAKE is not set
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPFR is not set
# BR2_PACKAGE_LIBTOOL is not set

#
# m4 requires a toolchain with WCHAR support
#

#
# pkg-config requires a toolchain with WCHAR support
#

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# Graphic applications
#

#
# rrdtool requires a toolchain with WCHAR support
#

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_SDL is not set

#
# other GUIs
#

#
# qt requires a toolchain with C++ support enabled
#

#
# X.org requires a toolchain with WCHAR support
#

#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set

#
# X Window managers
#

#
# X applications
#

#
# gob2 requires a toolchain with WCHAR support
#

#
# midori requires C++, WCHAR in toolchain and libgtk2
#

#
# Hardware handling
#

#
# cdrkit requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_CRAMFS is not set

#
# dbus not available (need expat or libxml2)
#

#
# dmraid requires a toolchain with LARGEFILE support
#

#
# dosfstools requires a toolchain with LARGEFILE support
#

#
# e2fsprogs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GENEXT2FS is not set
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_GPSD is not set

#
# gvfs requires a toolchain with LARGEFILE and WCHAR support
#

#
# hal requires a toolchain with WCHAR support
#
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LSUIO is not set

#
# lvm2 requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MDADM is not set

#
# memtester requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MTD is not set

#
# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
#

#
# ntfsprogs requires a toolchain with WCHAR and LARGEFILE support
#
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_RNG_TOOLS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set

#
# squashfs requires a toolchain with LARGEFILE support
#

#
# sshfs requires a toolchain with LARGEFILE and WCHAR support
#
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_UDEV is not set
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USBMOUNT is not set

#
# usbutils requires a toolchain with PROGRAM_INVOCATION support
#
# BR2_PACKAGE_WIPE is not set

#
# xfsprogs requires a toolchain with LARGEFILE support
#

#
# Interpreter languages and scripting
#
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PHP is not set

#
# python requires a toolchain with WCHAR support
#

#
# ruby requires a toolchain with WCHAR support
#
# BR2_PACKAGE_TCL is not set

#
# Libraries
#

#
# Compression and decompression
#

#
# libarchive requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LZO is not set
BR2_PACKAGE_ZLIB=y

#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_OPENSSL is not set

#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set

#
# Mysql client requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SQLITE is not set

#
# Filesystem
#

#
# gamin requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set

#
# libfuse requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set

#
# Graphics
#

#
# atk requires a toolchain with WCHAR support
#
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set

#
# libgtk2 requires a toolchain with WCHAR and C++ support
#
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set

#
# pango requires a toolchain with WCHAR and C++ support
#
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_TIFF is not set

#
# webkit requires C++, WCHAR in toolchain and libgtk2
#

#
# Hardware handling
#
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_LIBUSB is not set

#
# Networking
#
# BR2_PACKAGE_LIBCGI is not set

#
# libcgicc requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_LIBNL is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set

#
# libsoup requires a toolchain with WCHAR support
#

#
# libupnp requires a toolchain with LARGEFILE support
#

#
# Other
#
# BR2_PACKAGE_ARGP_STANDALONE is not set
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set

#
# libglib2 requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LIBOIL is not set

#
# Text and terminal handling
#

#
# enchant requires a toolchain with C++ and WCHAR support enabled
#

#
# icu requires a toolchain with C++ support and WCHAR enabled
#
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_PCRE is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_SLANG is not set

#
# XML
#
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set

#
# xerces-c++ requires a toolchain with C++ support enabled
#

#
# Miscellaneous
#

#
# shared-mime-info requires a toolchain with WCHAR support
#

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set

#
# bind requires a toolchain with LARGEFILE support
#

#
# bmon requires a toolchain with IPv6 support
#
# BR2_PACKAGE_BRIDGE is not set

#
# ctorrent requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_IFPLUGD is not set

#
# iperf requires a toolchain with C++ support enabled
#

#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set

#
# iptables requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_IW is not set

#
# Kismet requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_XL2TP is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MII_DIAG is not set
# BR2_PACKAGE_MROUTED is not set

#
# mutt requires a toolchain with WCHAR support
#

#
# nbd requires a toolchain with WCHAR support
#

#
# ncftp requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set

#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set

#
# olsr requires a toolchain with IPv6 support
#
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
# BR2_PACKAGE_OPENVPN is not set

#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SPAWN_FCGI is not set

#
# Squid requires a toolchain with C++ and IPv6 support enabled
#
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set

#
# udpcast requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set

#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set

#
# logrotate requires a toolchain with WCHAR support
#
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_WHICH is not set

#
# System tools
#

#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UEMACS is not set

#
# Target filesystem options
#
BR2_ROOTFS_POST_BUILD_SCRIPT=""
BR2_ROOTFS_DEVICE_TABLE="target/generic/device_table.txt"
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_UBOOT is not set

#
# Kernel
#
BR2_LINUX_KERNEL=y
# BR2_LINUX_KERNEL_2_6_36 is not set
BR2_LINUX_KERNEL_SAME_AS_HEADERS=y
# BR2_LINUX_KERNEL_CUSTOM_VERSION is not set
# BR2_LINUX_KERNEL_CUSTOM_TARBALL is not set
BR2_LINUX_KERNEL_VERSION="2.6.36.2"
BR2_LINUX_KERNEL_PATCH=""
# BR2_LINUX_KERNEL_USE_DEFCONFIG is not set
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="sparcclassic.config"
BR2_LINUX_KERNEL_ZIMAGE=y

[Index of Archives]     [Kernel Development]     [DCCP]     [Linux ARM Development]     [Linux]     [Photo]     [Yosemite Help]     [Linux ARM Kernel]     [Linux SCSI]     [Linux x86_64]     [Linux Hams]

  Powered by Linux