On Wed, 2011-01-12 at 01:30 +0000, Alex Buell wrote:
> On Tue, 2011-01-11 at 16:22 -0800, David Miller wrote:
> > From: Alex Buell <alex.buell@xxxxxxxxxxxxx>
> > Date: Wed, 12 Jan 2011 00:20:50 +0000
> >
> > > On Tue, 2011-01-11 at 15:48 -0800, David Miller wrote:
> > >
> > >> This patch set makes sure that FB drivers for PCI devices utilizing
> > >> the svgalib interfaces work on multi-domain PCI architectures.
> > >>
> > >> Basically this amounts to making sure that the vgastate->vgabase
> > >> __iomem pointer makes it way into every interfaces and gets used
> > >> by all of the I/O access calls.
> > >
> > > jeez, that was fast work! I'd already done the changes in s3fb.c but
> > > didn't get as far as you did with this.
> > >
> > > I'm now testing your patches right now.
> >
> > Thanks a lot in advance for testing Alex.
>
> With your patches, this happens:
>
> Jan 12 01:24:20 sodium kernel: fb1: S3 Virge/GX on 0000:00:03.0, 6 MB RAM, 14 MHz MCLK
> Jan 12 01:24:24 sodium kernel: eth0: Link down, cable problem?
> Jan 12 01:24:36 sodium kernel: eth0: Auto-Negotiation unsuccessful, trying force link mode
> Jan 12 01:24:45 sodium kernel: eth0: Link down, cable problem?
> Jan 12 01:24:47 sodium kernel: ERROR(1): Cheetah error trap taken afsr[0010100000000000] afar[00000000000a0000] TL1(0)
> Jan 12 01:24:47 sodium kernel: ERROR(1): TPC[1057490c] TNPC[10574910] O7[80] TSTATE[9911001600]
> Jan 12 01:24:47 sodium kernel: ERROR(1): TPC<restore_vga+0x8c0/0x1068 [vgastate]>
> Jan 12 01:24:47 sodium kernel: ERROR(1): M_SYND(0), E_SYND(0), Privileged
> Jan 12 01:24:47 sodium kernel: ERROR(1): Highest priority error (0000100000000000) "Unmapped error from system bus"
> Jan 12 01:24:47 sodium kernel: ERROR(1): D-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000]
> Jan 12 01:24:47 sodium kernel: ERROR(1): D-cache data0[0000000000000000] data1[0000000000000000] data2[0000000000000000] data3[0000000000000000]
> Jan 12 01:24:47 sodium kernel: ERROR(1): I-cache idx[0] tag[0000000000000000] utag[0000000000000000] stag[0000000000000000] u[0000000000000000] l[0000000000000000]
> Jan 12 01:24:47 sodium kernel: ERROR(1): I-cache INSN0[0000000000000000] INSN1[0000000000000000] INSN2[0000000000000000] INSN3[0000000000000000]
> Jan 12 01:24:47 sodium kernel: ERROR(1): I-cache INSN4[0000000000000000] INSN5[0000000000000000] INSN6[0000000000000000] INSN7[0000000000000000]
> Jan 12 01:24:47 sodium kernel: ERROR(1): E-cache idx[a0000] tag[0000000001000049]
> Jan 12 01:24:47 sodium kernel: ERROR(1): E-cache data0[82006c3080a08001] data1[1268001b03001c87] data2[25002050f05c24d0] data3[230021f8e65861e0]
> Jan 12 01:24:47 sodium kernel: Kernel panic - not syncing: Irrecoverable deferred error trap.
> Jan 12 01:24:47 sodium kernel:
> Jan 12 01:24:47 sodium kernel: sym0: SCSI BUS reset detected.
> Jan 12 01:24:47 sodium kernel: sym0: SCSI BUS has been reset.
> Jan 12 01:24:47 sodium kernel: Call Trace:
> Jan 12 01:24:47 sodium kernel: [00000000004292d0] cheetah_deferred_handler+0x494/0x4cc
> Jan 12 01:24:47 sodium kernel: [0000000000405e70] c_deferred+0x18/0x24
> Jan 12 01:24:47 sodium kernel: [000000001057490c] restore_vga+0x8c0/0x1068 [vgastate]
> Jan 12 01:24:47 sodium kernel: [00000000105b0840] s3fb_release+0x40/0x6c [s3fb]
> Jan 12 01:24:47 sodium kernel: [00000000005ca0fc] fb_release+0x24/0x4c
> Jan 12 01:24:47 sodium kernel: [00000000004bb8a0] fput+0x118/0x1e0
> Jan 12 01:24:47 sodium kernel: [00000000004b9100] filp_close+0x64/0x78
> Jan 12 01:24:47 sodium kernel: [00000000004b91a0] SyS_close+0x8c/0xe4
> Jan 12 01:24:47 sodium kernel: [0000000000406154] linux_sparc_syscall32+0x34/0x40
>
>
I just found the problem. Here's a patch that makes the s3fb driver
work. Haven't seen any output on the device yet that's to come later.
Here's a quick patch:
--- s3fb.c.orig 2011-01-12 02:09:47.339553002 +0000
+++ s3fb.c 2011-01-12 02:10:01.411553002 +0000
@@ -383,7 +383,7 @@
memset(&(par->state), 0, sizeof(struct vgastate));
par->state.vgabase = vgabase;
- par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS |
VGA_SAVE_CMAP;
+ par->state.flags = VGA_SAVE_MODE | VGA_SAVE_CMAP;
par->state.num_crtc = 0x70;
par->state.num_seq = 0x20;
save_vga(&(par->state));
# fbset -i -fb /dev/fb1
mode "640x480-60"
# D: 25.176 MHz, H: 31.469 kHz, V: 59.942 Hz
geometry 640 480 640 480 8
timings 39721 40 24 32 11 96 2
rgba 8/0,8/0,8/0,0/0
endmode
Frame buffer device information:
Name : S3 Virge/GX
Address : 0x14000000
Size : 6291456
Type : PACKED PIXELS
Visual : PSEUDOCOLOR
XPanStep : 0
YPanStep : 0
YWrapStep : 0
LineLength : 0
Accelerator : No
To get the driver to use /dev/fb1, I had to comment out some code as
well:
/*
if (! svga_primary_device(dev)) {
dev_info(&(dev->dev), "ignoring secondary device\n");
return -ENODEV;
}
*/
--
Tactical Nuclear Kittens
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
