On Sat, Nov 20, 2010 at 04:34:50PM -0800, David Miller wrote: > From: Daniel Smolik <marvin@xxxxxxxxxx> > Date: Sat, 20 Nov 2010 19:48:36 +0100 > > > Hi all, > > I upgrade my old E250 with RSC console to 2.6.36 an found that there > > is some broken with handover early console. > ... > > I don't know why console is switched to tty0. With 2.6.26 console work > > normaly. > > Ten releases is hundreds of megabytes worth of changes, and thus > makes it difficult to track down the problem. > > Can you try some releases in between to try and bisect this down to > something more specific? > > Also make sure you do have all the necessary drivers and serial > console options enabled. I have seen it on my machine as well (SunBlade 1000), but did not bother investigating as it appears to happen only on reboots and can be "fixed" (at least, in my case) by power-cycling the machine. Best regards, -- Jurij Smakov jurij@xxxxxxxxx Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
