On Fri, 2010-03-12 at 00:08 -0800, David Miller wrote: > From: Frans van Berckel <fberckel@xxxxxxxxx> > Date: Fri, 12 Mar 2010 08:54:39 +0100 > > >> sparc64: Add very basic XVR-1000 framebuffer driver. > > > > Oh that sound rely nice, wanne say thank you! Gonna test this XVR 1000 > > patch later on and will report the results. > > I look forward to it :-) It boot's! [ 0.000000] OF stdout device is: /upa@8,480000/SUNW,gfb@0,0:r1440x900x60 Next the screen is switching into blue letters, it scrolls on and on, as expected. At the end it prints a blinking cursor. It freezes the cursor. But the system goes on and is still accessible with ssh. Attaching the dmesg ...
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.5.21 2003/02/24 17:23' [ 0.000000] PROMLIB: Root node compatible: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.34-rc1-kernelbuilder-next-20100309+ (root@deblnxsrv251) (gcc version 4.4.3 (Ubuntu 4.4.3-3ubuntu1) ) #1 SMP Sat Mar 13 13:22:22 CET 2010 [ 0.000000] bootconsole [earlyprom0] enabled [ 0.000000] ARCH: SUN4U [ 0.000000] Ethernet address: 00:03:ba:5b:86:cb [ 0.000000] Kernel: Using 2 locked TLB entries for main kernel image. [ 0.000000] Remapping the kernel... done. [ 0.000000] OF stdout device is: /upa@8,480000/SUNW,gfb@0,0:r1440x900x60 [ 0.000000] PROM: Built device tree with 67248 bytes of memory. [ 0.000000] Top of RAM: 0x7fe8c000, Total RAM: 0x7fd6e000 [ 0.000000] Memory hole size: 1MB [ 0.000000] [0000010000000000-fffff80000c00000] page_structs=131072 node=0 entry=0/0 [ 0.000000] [0000010000000000-fffff80001000000] page_structs=131072 node=0 entry=1/0 [ 0.000000] [0000010000800000-fffff80001400000] page_structs=131072 node=0 entry=2/0 [ 0.000000] [0000010000800000-fffff80001800000] page_structs=131072 node=0 entry=3/0 [ 0.000000] Zone PFN ranges: [ 0.000000] Normal 0x00000000 -> 0x0003ff46 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0003f7ff [ 0.000000] 0: 0x0003f800 -> 0x0003fe3e [ 0.000000] 0: 0x0003fec0 -> 0x0003fec8 [ 0.000000] 0: 0x0003feca -> 0x0003fed2 [ 0.000000] 0: 0x0003fed4 -> 0x0003ff2f [ 0.000000] 0: 0x0003ff37 -> 0x0003ff46 [ 0.000000] On node 0 totalpages: 261815 [ 0.000000] Normal zone: 2047 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 259768 pages, LIFO batch:15 [ 0.000000] Booting Linux... [ 0.000000] PERCPU: Embedded 7 pages/cpu @fffff80001c00000 s25472 r8192 d23680 u4194304 [ 0.000000] pcpu-alloc: s25472 r8192 d23680 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 259768 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda5 ro [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes) [ 0.000000] Memory: 2061640k available (4400k kernel code, 1960k data, 352k init) [fffff80000000000,000000007fe8c000] [ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=16 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:255 [ 0.000000] clocksource: mult[c8000000] shift[24] [ 0.000000] clockevent: mult[147ae14] shift[32] [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 64.907919] Calibrating delay using timer specific routine.. 10.00 BogoMIPS (lpj=20019) [ 64.908048] Security Framework initialized [ 64.908085] SELinux: Disabled at boot. [ 64.908453] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes) [ 64.915461] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes) [ 64.918881] Mount-cache hash table entries: 512 [ 64.919420] Initializing cgroup subsys ns [ 64.919442] Initializing cgroup subsys devices [ 64.919458] Initializing cgroup subsys freezer [ 64.919471] Initializing cgroup subsys net_cls [ 64.919525] ftrace: allocating 14094 entries in 28 pages [ 64.926441] Brought up 1 CPUs [ 64.926880] devtmpfs: initialized [ 64.927444] regulator: core version 0.5 [ 64.927579] NET: Registered protocol family 16 [ 64.930787] Testing NMI watchdog ... OK. [ 65.010805] Performance events: Supported PMU type is 'ultra3+' [ 65.011370] /pci@8,700000: SCHIZO PCI Bus Module ver[7:0] [ 65.011391] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000] [ 65.015463] PCI: Scanning PBM /pci@8,700000 [ 65.015984] pci 0000:00:06.0: supports D1 D2 [ 65.016047] pci 0000:00:06.1: supports D1 D2 [ 65.016677] /pci@8,600000: SCHIZO PCI Bus Module ver[7:0] [ 65.016697] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000] [ 65.020731] PCI: Scanning PBM /pci@8,600000 [ 65.022520] bio: create slab <bio-0> at 0 [ 65.022885] vgaarb: loaded [ 65.023425] NetLabel: Initializing [ 65.023442] NetLabel: domain hash size = 128 [ 65.023457] NetLabel: protocols = UNLABELED CIPSOv4 [ 65.023516] NetLabel: unlabeled traffic allowed by default [ 65.023697] /pci@8,700000/ebus@5/rtc@1,300070: RTC regs at 0x7fe7e300070 [ 65.024096] Switching to clocksource stick [ 65.030246] NET: Registered protocol family 2 [ 65.030515] IP route cache hash table entries: 65536 (order: 6, 524288 bytes) [ 65.032508] TCP established hash table entries: 262144 (order: 9, 4194304 bytes) [ 65.046063] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes) [ 65.049467] TCP: Hash tables configured (established 262144 bind 65536) [ 65.049490] TCP reno registered [ 65.049523] UDP hash table entries: 1024 (order: 2, 32768 bytes) [ 65.049676] UDP-Lite hash table entries: 1024 (order: 2, 32768 bytes) [ 65.050062] NET: Registered protocol family 1 [ 65.050163] PCI: CLS 64 bytes, default 64 [ 65.050335] Trying to unpack rootfs image as initramfs... [ 65.471748] Freeing initrd memory: 8315k freed [ 65.472988] audit: initializing netlink socket (disabled) [ 65.473040] type=2000 audit(0.648:1): initialized [ 65.545468] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 65.550558] VFS: Disk quotas dquot_6.5.2 [ 65.550745] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) [ 65.552121] fuse init (API version 7.13) [ 65.552415] msgmni has been set to 4042 [ 65.553300] alg: No test for stdrng (krng) [ 65.553356] io scheduler noop registered [ 65.553376] io scheduler deadline registered [ 65.553617] io scheduler cfq registered (default) [ 65.554199] gfb: Found device at /upa@8,480000/SUNW,gfb@0,0 [ 65.594553] Console: switching to colour frame buffer device 160x64 [ 65.638376] [drm] Initialized drm 1.1.0 20060810 [ 65.638985] f0086c30: ttyS0 at MMIO 0x7fe7e400000 (irq = 12) is a SAB82532 V3.2 [ 65.639403] f0086c30: ttyS1 at MMIO 0x7fe7e400040 (irq = 12) is a SAB82532 V3.2 [ 65.642905] brd: module loaded [ 65.644599] loop: module loaded [ 65.644860] Fixed MDIO Bus: probed [ 65.645141] sungem.c:v0.98 8/24/03 David S. Miller (davem@xxxxxxxxxx) [ 65.646337] PHY ID: 18074c1, addr: 0 [ 65.647187] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:5b:86:cb [ 65.647518] eth0: Found Generic MII PHY [ 65.647743] tun: Universal TUN/TAP device driver, 1.6 [ 65.647983] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 65.648654] mice: PS/2 mouse device common for all mice [ 65.649181] input: Sparc BBC Speaker as /devices/root/f006c678/f007e070/f0084030/input/input0 [ 65.649955] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 65.650272] rtc0: no alarms, 114 bytes nvram [ 65.651404] TCP cubic registered [ 65.651568] NET: Registered protocol family 17 [ 65.652070] registered taskstats version 1 [ 65.652538] rtc_cmos rtc_cmos: setting system clock to 2010-03-13 17:24:24 UTC (1268501064) [ 65.691746] udev: starting version 151 [ 65.937621] SCSI subsystem initialized [ 66.019562] usbcore: registered new interface driver usbfs [ 66.019868] usbcore: registered new interface driver hub [ 66.152338] PCI: Enabling device: (0000:00:06.0), cmd 147 [ 66.153490] sym0: <875> rev 0x37 at pci 0000:00:06.0 irq 16 [ 66.240731] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking [ 66.248099] sym0: SCSI BUS has been reset. [ 66.248313] scsi0 : sym-2.2.3 [ 66.270752] QLogic Fibre Channel HBA Driver: 8.03.02-k1 [ 66.271044] PCI: Enabling device: (0001:00:04.0), cmd 3 [ 66.271063] qla2xxx 0001:00:04.0: Found an ISP2200, irq 20, iobase 0x000007fd00100000 [ 66.283977] usbcore: registered new device driver usb [ 66.290351] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 66.299077] qla2xxx 0001:00:04.0: Configuring PCI space... [ 66.307746] qla2xxx 0001:00:04.0: Configure NVRAM parameters... [ 66.410602] qla2xxx 0001:00:04.0: Inconsistent NVRAM detected: checksum=0x0 id= [ 66.410946] qla2xxx 0001:00:04.0: Falling back to functioning (yet invalid -- WWPN) defaults. [ 66.428638] qla2xxx 0001:00:04.0: Verifying loaded RISC code... [ 66.438341] PCI: Enabling device: (0000:00:06.1), cmd 147 [ 66.439509] sym1: <875> rev 0x37 at pci 0000:00:06.1 irq 17 [ 66.535783] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking [ 66.552491] sym1: SCSI BUS has been reset. [ 66.562233] scsi2 : sym-2.2.3 [ 66.572617] qla2xxx 0001:00:04.0: firmware: requesting ql2200_fw.bin [ 66.645274] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[14] MMIO=[7fe00120000-7fe001207ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 66.661466] ohci_hcd 0000:00:05.3: OHCI Host Controller [ 66.672576] ohci_hcd 0000:00:05.3: new USB bus registered, assigned bus number 1 [ 66.683961] ohci_hcd 0000:00:05.3: irq 15, io mem 0x7fe01000000 [ 66.752577] hub 1-0:1.0: USB hub found [ 66.764120] hub 1-0:1.0: 4 ports detected [ 67.100227] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 67.312017] input: HID 0430:0100 as /devices/root/f006c678/pci0000:00/0000:00:05.3/usb1/1-1/1-1:1.0/input/input1 [ 67.324761] generic-usb 0003:0430:0100.0001: input,hidraw0: USB HID v1.10 Mouse [HID 0430:0100] on usb-0000:00:05.3-1/input0 [ 67.337848] usbcore: registered new interface driver usbhid [ 67.351039] usbhid: USB HID core driver [ 67.420228] usb 1-2: new low speed USB device using ohci_hcd and address 3 [ 67.594671] input: HID 0430:0005 as /devices/root/f006c678/pci0000:00/0000:00:05.3/usb1/1-2/1-2:1.0/input/input2 [ 67.609055] generic-usb 0003:0430:0005.0002: input,hidraw1: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:05.3-2/input0 [ 67.932445] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe5b86cb] [ 68.044422] eth0: Link is up at 100 Mbps, full-duplex. [ 71.001376] scsi 0:0:6:0: CD-ROM TOSHIBA DVD-ROM SD-M1401 1007 PQ: 0 ANSI: 2 [ 71.015994] scsi target0:0:6: Beginning Domain Validation [ 71.032295] scsi target0:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) [ 71.048224] scsi target0:0:6: Domain Validation skipping write tests [ 71.062989] scsi target0:0:6: Ending Domain Validation [ 73.457807] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray [ 73.472601] Uniform CD-ROM driver Revision: 3.20 [ 73.487495] sr 0:0:6:0: Attached scsi CD-ROM sr0 [ 73.501968] sr 0:0:6:0: Attached scsi generic sg0 type 5 [ 77.420288] qla2xxx 0001:00:04.0: Allocated (252 KB) for firmware dump... [ 77.560226] qla2xxx 0001:00:04.0: LIP reset occurred (f8e8). [ 77.575035] scsi1 : qla2xxx [ 77.590390] qla2xxx 0001:00:04.0: [ 77.590394] QLogic Fibre Channel HBA Driver: 8.03.02-k1 [ 77.590398] QLogic QLA22xx - [ 77.590400] ISP2200: PCI (66 MHz) @ 0001:00:04.0 hdma-, host#=1, fw=2.02.08 TP [ 77.647535] qla2xxx 0001:00:04.0: LIP occurred (f8e8). [ 77.662023] qla2xxx 0001:00:04.0: LOOP UP detected (1 Gbps). [ 78.581442] scsi 1:0:0:0: Direct-Access SEAGATE ST336605FSUN36G 0638 PQ: 0 ANSI: 3 [ 78.596840] scsi 1:0:0:0: Attached scsi generic sg1 type 0 [ 78.635907] sd 1:0:0:0: [sda] 71132959 512-byte logical blocks: (36.4 GB/33.9 GiB) [ 78.653014] sd 1:0:0:0: [sda] Write Protect is off [ 78.667483] sd 1:0:0:0: [sda] Mode Sense: db 00 10 08 [ 78.671866] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 78.696847] sda: sda1 sda2 sda3 sda4 sda5 sda6 [ 78.732469] sd 1:0:0:0: [sda] Attached SCSI disk [ 79.450624] kjournald starting. Commit interval 5 seconds [ 79.465589] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 83.596381] Adding 891592k swap on /dev/sda4. Priority:-1 extents:1 across:891592k [ 83.678536] udev: starting version 151 [ 83.875017] EXT3-fs (sda5): using internal journal [ 84.549903] kjournald starting. Commit interval 5 seconds [ 84.561101] EXT3-fs (sda6): using internal journal [ 84.561121] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 84.569637] eth0: Link is up at 100 Mbps, full-duplex. [ 84.569648] eth0: Pause is disabled [ 84.671821] plymouthd[170]: segfault at 0 ip 00000000f7e3f790 (rpc 00000000f7bd5eb0) sp 00000000ffa213e0 error 30001 in libc-2.11.1.so[f7db0000+168000] [ 85.209528] NET: Registered protocol family 10 [ 85.210677] lo: Disabled Privacy Extensions [ 85.527599] RPC: Registered udp transport module. [ 85.527610] RPC: Registered tcp transport module. [ 85.527617] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 85.937900] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). [ 86.475976] svc: failed to register lockdv1 RPC service (errno 47). [ 86.478863] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 86.487283] NFSD: starting 90-second grace period [ 95.916219] eth0: no IPv6 routers present
