sparc32 v2.6.29 boots and runs fine.
sparc32 v2.6.30-rc6 fails at root filesystem detection.
Looks like a SCSI issue?
Here are the relevant boot log differences:
v2.6.29:
Begin: Loading essential drivers... ...
[42949381.570000] SCSI subsystem initialized
[42949381.710000] esp: esp0, regs[fd407000:fd406000] irq[36]
[42949381.720000] esp: esp0 is a FAS100A, 40 MHz (ccf=0), SCSI ID 7
[42949384.740000] scsi0 : esp
[42949384.760000] esp: esp1, regs[fd409000:fd408000] irq[53]
[42949384.770000] esp: esp1 is a FASHME, 40 MHz (ccf=0), SCSI ID 7
[42949387.790000] scsi1 : esp
[42949387.830000] scsi 1:0:0:0: Direct-Access SEAGATE
ST39102LCSUN9.0G 0822
[42949387.840000] target1:0:0: Beginning Domain Validation
[42949387.870000] target1:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns,
offset )
[42949387.900000] target1:0:0: Domain Validation skipping write tests
[42949387.910000] target1:0:0: Ending Domain Validation
Done.
Begin: Running /scripts/init-premount ...
[42949392.670000] Driver 'sd' needs updating - please use bus_type methods
[42949392.710000] sd 1:0:0:0: [sda] 17689267 512-byte hardware sectors:
(9.05 G)
[42949392.720000] sd 1:0:0:0: [sda] Write Protect is off
[42949392.740000] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled,A
[42949392.750000] sd 1:0:0:0: [sda] 17689267 512-byte hardware sectors:
(9.05 G)
[42949392.760000] sd 1:0:0:0: [sda] Write Protect is off
[42949392.770000] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled,A
[42949392.780000] sda: sda1 sda2 sda3 sda4
[42949392.830000] sd 1:0:0:0: [sda] Attached SCSI disk
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Running /scripts/local-premount ...
Done.
v2.6.30-rc6:
Begin: Loading essential drivers... ...
[ 5.350000] SCSI subsystem initialized
[ 5.490000] esp: esp0, regs[fd407000:fd406000] irq[36]
[ 5.500000] esp: esp0 is a FAS100A, 40 MHz (ccf=0), SCSI ID 7
[ 8.520000] scsi0 : esp
[ 8.530000] esp: esp1, regs[fd409000:fd408000] irq[53]
[ 8.540000] esp: esp1 is a FASHME, 40 MHz (ccf=0), SCSI ID 7
[ 11.560000] scsi1 : esp
[ 11.580000] scsi 1:0:0:0: Direct-Access SEAGATE ST39102LCSUN9.0G
0828 P2
[ 11.590000] target1:0:0: Beginning Domain Validation
[ 11.610000] target1:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns,
offset 15)
[ 11.630000] target1:0:0: Domain Validation skipping write tests
[ 11.640000] target1:0:0: Ending Domain Validation
Done.
Begin: Running /scripts/init-premount ...
[ 16.060000] Driver 'sd' needs updating - please use bus_type methods
[ 16.090000] sd 1:0:0:0: [sda] 17689267 512-byte hardware sectors:
(9.05 GB/8)
[ 16.100000] sd 1:0:0:0: [sda] Write Protect is off
[ 16.110000] sd 1:0:0:0: [sda] Write cache: disabled, read cache:
enabled, suA
[ 16.130000] sda: sda1 sda2 sda3 sda4
[ 16.190000] sd 1:0:0:0: [sda] Attached SCSI disk
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
Done.
Begin: Running /scripts/local-premount ...
Done.
mount: Mounting /dev/sda2 on /root failed: No such device
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
mount: Mounting /root/dev on /dev/.static/dev failed: No such file or
directory
Done.
mount: Mounting /sys on /root/sys failed: No such file or directory
mount: Mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
