I'm just Cc:'ing this to the sparc kernel mailing list...
On Sun, Jan 25, 2009 at 08:21:56PM -0500, Brian Thompson wrote:
>
> Hello,
>
> I'd like to get some feedback as to whether anyone is actually using
> the dmfe Davicom kernel module on sparc for 10/100 ethernet.
>
> To the best of my knowledge, Sun never manufactured any
> expansion cards that utilize the Davicom chip and the UltraAX-i2
> motherboard (Netra X1 and Sunfire V100) is the only Sun
> motherboard that uses the chip. That particular motherboard
> uses the tulip kernel module though, not the dmfe kernel module.
>
> Since the PCI ID of the UltraAX-i2's onboard ethernet
> (1282:9102 - Davicom 9102) matches up with both the dmfe
> module and the tulip module, both modules attempt to load and
> end up causing the network interface to malfunction.
>
> My question is - is anyone actually using the dmfe kernel module
> on sparc and/or would it be ok to set the default to not build the
> dmfe kernel module on sparc?
>
> I presume that the only scenario where anyone would actually be
> using the dmfe kernel module on sparc would be if they've installed
> a PCI NIC originally intended for x86 machines into their sparc
> machine.
>
> Any feedback would be greatly appreciated.
>
> Thanks,
> Brian
--
2. That which causes joy or happiness.
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
