I'm not having any luck getting X to work on my Ultra 10 (onboard ATI Mach64). When I try, I get: (EE) Unable to map mmio aperture. Invalid argument (22) (EE) Screen(s) found, but none have a usable configuration. In the Xorg.0.log, I see: (**) MACH64(0): Depth 24, (--) framebuffer bpp 32 (==) MACH64(0): Using XAA acceleration architecture (EE) Unable to map mmio aperture. Invalid argument (22) (WW) MACH64: Mach64 in slot 1:2:0 could not be detected! (II) UnloadModule: "mach64" (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found dmesg shows: ------------[ cut here ]------------ WARNING: at drivers/pci/pci-sysfs.c:499 pci_mmap_resource+0xf4/0x150() process "X" tried to map 0x00000000-0x00000001 on 0000:01:02.0 BAR 2 (size 0x00000000) Modules linked in: bridge stp bnep rfcomm l2cap bluetooth sunrpc nf_conntrack_ipv4 ipt_REJECT iptable_filter ip_tables nf_conntrack_ipv6 ip6t_REJECT xt_tcpudp xt_state nf_conntrack ip6table_filter ip6_tables x_tables ipv6 dm_multipath scsi_dh sr_mod cdrom sunhme sermouse sg dm_snapshot dm_zero dm_mirror dm_log dm_mod pata_cmd64x ata_generic libata sd_mod scsi_mod crc_t10dif ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: scsi_wait_scan] Call Trace: [000000000057cb84] pci_mmap_resource+0xf4/0x150 [00000000005169d8] mmap+0x48/0x94 [00000000004b1918] mmap_region+0x25c/0x4a4 [00000000004b1eac] do_mmap_pgoff+0x34c/0x39c [0000000000432854] sys_mmap+0x84/0xb4 [0000000000406154] linux_sparc_syscall+0x34/0x44 ---[ end trace 539489bc773a85f7 ]--- This seemed similar to some traffic on debian-sparc, but none of their fixes resolves this failure. I've tried 2.6.27.9, 2.6.27.10, and 2.6.27.10 with a patch from debian-sparc, none of them resolve the failure. (Patch attempted is here: http://www.nabble.com/Fix-found-p20330550.html ) lspci says: 01:02.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 5c) (prog-if 00 [VGA controller]) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 13 Region 0: Memory at e1000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at fffffe0100000000 [disabled] [size=1] Region 2: Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Region 3: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 4: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Region 5: [virtual] Memory at fffffe0100000000 (32-bit, non-prefetchable) [size=1] Expansion ROM at fffffe0100000000 [disabled] [size=1] Kernel driver in use: atyfb Versions of related components: libpciaccess: 0.10.3 libX11: 1.1.4 xorg-x11-drv-ati: 6.8.0 xorg-x11-server-Xorg: 1.5.2 (I tried 1.5.3, it did not change anything) glibc: 2.8 OBP 3.15.2 1998/11/10 10:35 Base OS is Fedora 9 SPARC (optimized sparcv9). Any and all help would be greatly appreciated. ~spot -- To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
