sparc: Move irq_trans_init() and support code into seperate file.
All sparc64 specific, so only build this file on sparc64.
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
---
arch/sparc/kernel/Makefile | 1 +
arch/sparc/kernel/prom.h | 4 +
arch/sparc/kernel/prom_64.c | 830 ------------------------------------
arch/sparc/kernel/prom_irqtrans.c | 842 +++++++++++++++++++++++++++++++++++++
4 files changed, 847 insertions(+), 830 deletions(-)
create mode 100644 arch/sparc/kernel/prom_irqtrans.c
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index d0d63b1..04c74d0 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_SPARC32) += muldiv.o
obj-y += prom_common.o
obj-y += prom_$(BITS).o
obj-y += of_device_$(BITS).o
+obj-$(CONFIG_SPARC64) += prom_irqtrans.o
obj-$(CONFIG_SPARC64) += reboot.o
obj-$(CONFIG_SPARC64) += sysfs.o
diff --git a/arch/sparc/kernel/prom.h b/arch/sparc/kernel/prom.h
index b7258ce..4992510 100644
--- a/arch/sparc/kernel/prom.h
+++ b/arch/sparc/kernel/prom.h
@@ -9,4 +9,8 @@ extern rwlock_t devtree_lock; /* temporary while merging */
extern void * prom_early_alloc(unsigned long size);
+#ifdef CONFIG_SPARC64
+extern void irq_trans_init(struct device_node *dp);
+#endif
+
#endif /* __PROM_H */
diff --git a/arch/sparc/kernel/prom_64.c b/arch/sparc/kernel/prom_64.c
index 1c7b9d7..d745b9f 100644
--- a/arch/sparc/kernel/prom_64.c
+++ b/arch/sparc/kernel/prom_64.c
@@ -51,836 +51,6 @@ void * __init prom_early_alloc(unsigned long size)
return ret;
}
-#ifdef CONFIG_PCI
-/* PSYCHO interrupt mapping support. */
-#define PSYCHO_IMAP_A_SLOT0 0x0c00UL
-#define PSYCHO_IMAP_B_SLOT0 0x0c20UL
-static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
-{
- unsigned int bus = (ino & 0x10) >> 4;
- unsigned int slot = (ino & 0x0c) >> 2;
-
- if (bus == 0)
- return PSYCHO_IMAP_A_SLOT0 + (slot * 8);
- else
- return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
-}
-
-#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
-
-#define PSYCHO_ONBOARD_IRQ_BASE 0x20
-#define psycho_onboard_imap_offset(__ino) \
- (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
-
-#define PSYCHO_ICLR_A_SLOT0 0x1400UL
-#define PSYCHO_ICLR_SCSI 0x1800UL
-
-#define psycho_iclr_offset(ino) \
- ((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
- (PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
-
-static unsigned int psycho_irq_build(struct device_node *dp,
- unsigned int ino,
- void *_data)
-{
- unsigned long controller_regs = (unsigned long) _data;
- unsigned long imap, iclr;
- unsigned long imap_off, iclr_off;
- int inofixup = 0;
-
- ino &= 0x3f;
- if (ino < PSYCHO_ONBOARD_IRQ_BASE) {
- /* PCI slot */
- imap_off = psycho_pcislot_imap_offset(ino);
- } else {
- /* Onboard device */
- imap_off = psycho_onboard_imap_offset(ino);
- }
-
- /* Now build the IRQ bucket. */
- imap = controller_regs + imap_off;
-
- iclr_off = psycho_iclr_offset(ino);
- iclr = controller_regs + iclr_off;
-
- if ((ino & 0x20) == 0)
- inofixup = ino & 0x03;
-
- return build_irq(inofixup, iclr, imap);
-}
-
-static void __init psycho_irq_trans_init(struct device_node *dp)
-{
- const struct linux_prom64_registers *regs;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = psycho_irq_build;
-
- regs = of_get_property(dp, "reg", NULL);
- dp->irq_trans->data = (void *) regs[2].phys_addr;
-}
-
-#define sabre_read(__reg) \
-({ u64 __ret; \
- __asm__ __volatile__("ldxa [%1] %2, %0" \
- : "=r" (__ret) \
- : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
- : "memory"); \
- __ret; \
-})
-
-struct sabre_irq_data {
- unsigned long controller_regs;
- unsigned int pci_first_busno;
-};
-#define SABRE_CONFIGSPACE 0x001000000UL
-#define SABRE_WRSYNC 0x1c20UL
-
-#define SABRE_CONFIG_BASE(CONFIG_SPACE) \
- (CONFIG_SPACE | (1UL << 24))
-#define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
- (((unsigned long)(BUS) << 16) | \
- ((unsigned long)(DEVFN) << 8) | \
- ((unsigned long)(REG)))
-
-/* When a device lives behind a bridge deeper in the PCI bus topology
- * than APB, a special sequence must run to make sure all pending DMA
- * transfers at the time of IRQ delivery are visible in the coherency
- * domain by the cpu. This sequence is to perform a read on the far
- * side of the non-APB bridge, then perform a read of Sabre's DMA
- * write-sync register.
- */
-static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
-{
- unsigned int phys_hi = (unsigned int) (unsigned long) _arg1;
- struct sabre_irq_data *irq_data = _arg2;
- unsigned long controller_regs = irq_data->controller_regs;
- unsigned long sync_reg = controller_regs + SABRE_WRSYNC;
- unsigned long config_space = controller_regs + SABRE_CONFIGSPACE;
- unsigned int bus, devfn;
- u16 _unused;
-
- config_space = SABRE_CONFIG_BASE(config_space);
-
- bus = (phys_hi >> 16) & 0xff;
- devfn = (phys_hi >> 8) & 0xff;
-
- config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00);
-
- __asm__ __volatile__("membar #Sync\n\t"
- "lduha [%1] %2, %0\n\t"
- "membar #Sync"
- : "=r" (_unused)
- : "r" ((u16 *) config_space),
- "i" (ASI_PHYS_BYPASS_EC_E_L)
- : "memory");
-
- sabre_read(sync_reg);
-}
-
-#define SABRE_IMAP_A_SLOT0 0x0c00UL
-#define SABRE_IMAP_B_SLOT0 0x0c20UL
-#define SABRE_ICLR_A_SLOT0 0x1400UL
-#define SABRE_ICLR_B_SLOT0 0x1480UL
-#define SABRE_ICLR_SCSI 0x1800UL
-#define SABRE_ICLR_ETH 0x1808UL
-#define SABRE_ICLR_BPP 0x1810UL
-#define SABRE_ICLR_AU_REC 0x1818UL
-#define SABRE_ICLR_AU_PLAY 0x1820UL
-#define SABRE_ICLR_PFAIL 0x1828UL
-#define SABRE_ICLR_KMS 0x1830UL
-#define SABRE_ICLR_FLPY 0x1838UL
-#define SABRE_ICLR_SHW 0x1840UL
-#define SABRE_ICLR_KBD 0x1848UL
-#define SABRE_ICLR_MS 0x1850UL
-#define SABRE_ICLR_SER 0x1858UL
-#define SABRE_ICLR_UE 0x1870UL
-#define SABRE_ICLR_CE 0x1878UL
-#define SABRE_ICLR_PCIERR 0x1880UL
-
-static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
-{
- unsigned int bus = (ino & 0x10) >> 4;
- unsigned int slot = (ino & 0x0c) >> 2;
-
- if (bus == 0)
- return SABRE_IMAP_A_SLOT0 + (slot * 8);
- else
- return SABRE_IMAP_B_SLOT0 + (slot * 8);
-}
-
-#define SABRE_OBIO_IMAP_BASE 0x1000UL
-#define SABRE_ONBOARD_IRQ_BASE 0x20
-#define sabre_onboard_imap_offset(__ino) \
- (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
-
-#define sabre_iclr_offset(ino) \
- ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
- (SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
-
-static int sabre_device_needs_wsync(struct device_node *dp)
-{
- struct device_node *parent = dp->parent;
- const char *parent_model, *parent_compat;
-
- /* This traversal up towards the root is meant to
- * handle two cases:
- *
- * 1) non-PCI bus sitting under PCI, such as 'ebus'
- * 2) the PCI controller interrupts themselves, which
- * will use the sabre_irq_build but do not need
- * the DMA synchronization handling
- */
- while (parent) {
- if (!strcmp(parent->type, "pci"))
- break;
- parent = parent->parent;
- }
-
- if (!parent)
- return 0;
-
- parent_model = of_get_property(parent,
- "model", NULL);
- if (parent_model &&
- (!strcmp(parent_model, "SUNW,sabre") ||
- !strcmp(parent_model, "SUNW,simba")))
- return 0;
-
- parent_compat = of_get_property(parent,
- "compatible", NULL);
- if (parent_compat &&
- (!strcmp(parent_compat, "pci108e,a000") ||
- !strcmp(parent_compat, "pci108e,a001")))
- return 0;
-
- return 1;
-}
-
-static unsigned int sabre_irq_build(struct device_node *dp,
- unsigned int ino,
- void *_data)
-{
- struct sabre_irq_data *irq_data = _data;
- unsigned long controller_regs = irq_data->controller_regs;
- const struct linux_prom_pci_registers *regs;
- unsigned long imap, iclr;
- unsigned long imap_off, iclr_off;
- int inofixup = 0;
- int virt_irq;
-
- ino &= 0x3f;
- if (ino < SABRE_ONBOARD_IRQ_BASE) {
- /* PCI slot */
- imap_off = sabre_pcislot_imap_offset(ino);
- } else {
- /* onboard device */
- imap_off = sabre_onboard_imap_offset(ino);
- }
-
- /* Now build the IRQ bucket. */
- imap = controller_regs + imap_off;
-
- iclr_off = sabre_iclr_offset(ino);
- iclr = controller_regs + iclr_off;
-
- if ((ino & 0x20) == 0)
- inofixup = ino & 0x03;
-
- virt_irq = build_irq(inofixup, iclr, imap);
-
- /* If the parent device is a PCI<->PCI bridge other than
- * APB, we have to install a pre-handler to ensure that
- * all pending DMA is drained before the interrupt handler
- * is run.
- */
- regs = of_get_property(dp, "reg", NULL);
- if (regs && sabre_device_needs_wsync(dp)) {
- irq_install_pre_handler(virt_irq,
- sabre_wsync_handler,
- (void *) (long) regs->phys_hi,
- (void *) irq_data);
- }
-
- return virt_irq;
-}
-
-static void __init sabre_irq_trans_init(struct device_node *dp)
-{
- const struct linux_prom64_registers *regs;
- struct sabre_irq_data *irq_data;
- const u32 *busrange;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = sabre_irq_build;
-
- irq_data = prom_early_alloc(sizeof(struct sabre_irq_data));
-
- regs = of_get_property(dp, "reg", NULL);
- irq_data->controller_regs = regs[0].phys_addr;
-
- busrange = of_get_property(dp, "bus-range", NULL);
- irq_data->pci_first_busno = busrange[0];
-
- dp->irq_trans->data = irq_data;
-}
-
-/* SCHIZO interrupt mapping support. Unlike Psycho, for this controller the
- * imap/iclr registers are per-PBM.
- */
-#define SCHIZO_IMAP_BASE 0x1000UL
-#define SCHIZO_ICLR_BASE 0x1400UL
-
-static unsigned long schizo_imap_offset(unsigned long ino)
-{
- return SCHIZO_IMAP_BASE + (ino * 8UL);
-}
-
-static unsigned long schizo_iclr_offset(unsigned long ino)
-{
- return SCHIZO_ICLR_BASE + (ino * 8UL);
-}
-
-static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
- unsigned int ino)
-{
-
- return pbm_regs + schizo_iclr_offset(ino);
-}
-
-static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
- unsigned int ino)
-{
- return pbm_regs + schizo_imap_offset(ino);
-}
-
-#define schizo_read(__reg) \
-({ u64 __ret; \
- __asm__ __volatile__("ldxa [%1] %2, %0" \
- : "=r" (__ret) \
- : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
- : "memory"); \
- __ret; \
-})
-#define schizo_write(__reg, __val) \
- __asm__ __volatile__("stxa %0, [%1] %2" \
- : /* no outputs */ \
- : "r" (__val), "r" (__reg), \
- "i" (ASI_PHYS_BYPASS_EC_E) \
- : "memory")
-
-static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
-{
- unsigned long sync_reg = (unsigned long) _arg2;
- u64 mask = 1UL << (ino & IMAP_INO);
- u64 val;
- int limit;
-
- schizo_write(sync_reg, mask);
-
- limit = 100000;
- val = 0;
- while (--limit) {
- val = schizo_read(sync_reg);
- if (!(val & mask))
- break;
- }
- if (limit <= 0) {
- printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n",
- val, mask);
- }
-
- if (_arg1) {
- static unsigned char cacheline[64]
- __attribute__ ((aligned (64)));
-
- __asm__ __volatile__("rd %%fprs, %0\n\t"
- "or %0, %4, %1\n\t"
- "wr %1, 0x0, %%fprs\n\t"
- "stda %%f0, [%5] %6\n\t"
- "wr %0, 0x0, %%fprs\n\t"
- "membar #Sync"
- : "=&r" (mask), "=&r" (val)
- : "0" (mask), "1" (val),
- "i" (FPRS_FEF), "r" (&cacheline[0]),
- "i" (ASI_BLK_COMMIT_P));
- }
-}
-
-struct schizo_irq_data {
- unsigned long pbm_regs;
- unsigned long sync_reg;
- u32 portid;
- int chip_version;
-};
-
-static unsigned int schizo_irq_build(struct device_node *dp,
- unsigned int ino,
- void *_data)
-{
- struct schizo_irq_data *irq_data = _data;
- unsigned long pbm_regs = irq_data->pbm_regs;
- unsigned long imap, iclr;
- int ign_fixup;
- int virt_irq;
- int is_tomatillo;
-
- ino &= 0x3f;
-
- /* Now build the IRQ bucket. */
- imap = schizo_ino_to_imap(pbm_regs, ino);
- iclr = schizo_ino_to_iclr(pbm_regs, ino);
-
- /* On Schizo, no inofixup occurs. This is because each
- * INO has it's own IMAP register. On Psycho and Sabre
- * there is only one IMAP register for each PCI slot even
- * though four different INOs can be generated by each
- * PCI slot.
- *
- * But, for JBUS variants (essentially, Tomatillo), we have
- * to fixup the lowest bit of the interrupt group number.
- */
- ign_fixup = 0;
-
- is_tomatillo = (irq_data->sync_reg != 0UL);
-
- if (is_tomatillo) {
- if (irq_data->portid & 1)
- ign_fixup = (1 << 6);
- }
-
- virt_irq = build_irq(ign_fixup, iclr, imap);
-
- if (is_tomatillo) {
- irq_install_pre_handler(virt_irq,
- tomatillo_wsync_handler,
- ((irq_data->chip_version <= 4) ?
- (void *) 1 : (void *) 0),
- (void *) irq_data->sync_reg);
- }
-
- return virt_irq;
-}
-
-static void __init __schizo_irq_trans_init(struct device_node *dp,
- int is_tomatillo)
-{
- const struct linux_prom64_registers *regs;
- struct schizo_irq_data *irq_data;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = schizo_irq_build;
-
- irq_data = prom_early_alloc(sizeof(struct schizo_irq_data));
-
- regs = of_get_property(dp, "reg", NULL);
- dp->irq_trans->data = irq_data;
-
- irq_data->pbm_regs = regs[0].phys_addr;
- if (is_tomatillo)
- irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL;
- else
- irq_data->sync_reg = 0UL;
- irq_data->portid = of_getintprop_default(dp, "portid", 0);
- irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
-}
-
-static void __init schizo_irq_trans_init(struct device_node *dp)
-{
- __schizo_irq_trans_init(dp, 0);
-}
-
-static void __init tomatillo_irq_trans_init(struct device_node *dp)
-{
- __schizo_irq_trans_init(dp, 1);
-}
-
-static unsigned int pci_sun4v_irq_build(struct device_node *dp,
- unsigned int devino,
- void *_data)
-{
- u32 devhandle = (u32) (unsigned long) _data;
-
- return sun4v_build_irq(devhandle, devino);
-}
-
-static void __init pci_sun4v_irq_trans_init(struct device_node *dp)
-{
- const struct linux_prom64_registers *regs;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = pci_sun4v_irq_build;
-
- regs = of_get_property(dp, "reg", NULL);
- dp->irq_trans->data = (void *) (unsigned long)
- ((regs->phys_addr >> 32UL) & 0x0fffffff);
-}
-
-struct fire_irq_data {
- unsigned long pbm_regs;
- u32 portid;
-};
-
-#define FIRE_IMAP_BASE 0x001000
-#define FIRE_ICLR_BASE 0x001400
-
-static unsigned long fire_imap_offset(unsigned long ino)
-{
- return FIRE_IMAP_BASE + (ino * 8UL);
-}
-
-static unsigned long fire_iclr_offset(unsigned long ino)
-{
- return FIRE_ICLR_BASE + (ino * 8UL);
-}
-
-static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
- unsigned int ino)
-{
- return pbm_regs + fire_iclr_offset(ino);
-}
-
-static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
- unsigned int ino)
-{
- return pbm_regs + fire_imap_offset(ino);
-}
-
-static unsigned int fire_irq_build(struct device_node *dp,
- unsigned int ino,
- void *_data)
-{
- struct fire_irq_data *irq_data = _data;
- unsigned long pbm_regs = irq_data->pbm_regs;
- unsigned long imap, iclr;
- unsigned long int_ctrlr;
-
- ino &= 0x3f;
-
- /* Now build the IRQ bucket. */
- imap = fire_ino_to_imap(pbm_regs, ino);
- iclr = fire_ino_to_iclr(pbm_regs, ino);
-
- /* Set the interrupt controller number. */
- int_ctrlr = 1 << 6;
- upa_writeq(int_ctrlr, imap);
-
- /* The interrupt map registers do not have an INO field
- * like other chips do. They return zero in the INO
- * field, and the interrupt controller number is controlled
- * in bits 6 to 9. So in order for build_irq() to get
- * the INO right we pass it in as part of the fixup
- * which will get added to the map register zero value
- * read by build_irq().
- */
- ino |= (irq_data->portid << 6);
- ino -= int_ctrlr;
- return build_irq(ino, iclr, imap);
-}
-
-static void __init fire_irq_trans_init(struct device_node *dp)
-{
- const struct linux_prom64_registers *regs;
- struct fire_irq_data *irq_data;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = fire_irq_build;
-
- irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
-
- regs = of_get_property(dp, "reg", NULL);
- dp->irq_trans->data = irq_data;
-
- irq_data->pbm_regs = regs[0].phys_addr;
- irq_data->portid = of_getintprop_default(dp, "portid", 0);
-}
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_SBUS
-/* INO number to IMAP register offset for SYSIO external IRQ's.
- * This should conform to both Sunfire/Wildfire server and Fusion
- * desktop designs.
- */
-#define SYSIO_IMAP_SLOT0 0x2c00UL
-#define SYSIO_IMAP_SLOT1 0x2c08UL
-#define SYSIO_IMAP_SLOT2 0x2c10UL
-#define SYSIO_IMAP_SLOT3 0x2c18UL
-#define SYSIO_IMAP_SCSI 0x3000UL
-#define SYSIO_IMAP_ETH 0x3008UL
-#define SYSIO_IMAP_BPP 0x3010UL
-#define SYSIO_IMAP_AUDIO 0x3018UL
-#define SYSIO_IMAP_PFAIL 0x3020UL
-#define SYSIO_IMAP_KMS 0x3028UL
-#define SYSIO_IMAP_FLPY 0x3030UL
-#define SYSIO_IMAP_SHW 0x3038UL
-#define SYSIO_IMAP_KBD 0x3040UL
-#define SYSIO_IMAP_MS 0x3048UL
-#define SYSIO_IMAP_SER 0x3050UL
-#define SYSIO_IMAP_TIM0 0x3060UL
-#define SYSIO_IMAP_TIM1 0x3068UL
-#define SYSIO_IMAP_UE 0x3070UL
-#define SYSIO_IMAP_CE 0x3078UL
-#define SYSIO_IMAP_SBERR 0x3080UL
-#define SYSIO_IMAP_PMGMT 0x3088UL
-#define SYSIO_IMAP_GFX 0x3090UL
-#define SYSIO_IMAP_EUPA 0x3098UL
-
-#define bogon ((unsigned long) -1)
-static unsigned long sysio_irq_offsets[] = {
- /* SBUS Slot 0 --> 3, level 1 --> 7 */
- SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
- SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
- SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
- SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
- SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
- SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
- SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
- SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
-
- /* Onboard devices (not relevant/used on SunFire). */
- SYSIO_IMAP_SCSI,
- SYSIO_IMAP_ETH,
- SYSIO_IMAP_BPP,
- bogon,
- SYSIO_IMAP_AUDIO,
- SYSIO_IMAP_PFAIL,
- bogon,
- bogon,
- SYSIO_IMAP_KMS,
- SYSIO_IMAP_FLPY,
- SYSIO_IMAP_SHW,
- SYSIO_IMAP_KBD,
- SYSIO_IMAP_MS,
- SYSIO_IMAP_SER,
- bogon,
- bogon,
- SYSIO_IMAP_TIM0,
- SYSIO_IMAP_TIM1,
- bogon,
- bogon,
- SYSIO_IMAP_UE,
- SYSIO_IMAP_CE,
- SYSIO_IMAP_SBERR,
- SYSIO_IMAP_PMGMT,
- SYSIO_IMAP_GFX,
- SYSIO_IMAP_EUPA,
-};
-
-#undef bogon
-
-#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
-
-/* Convert Interrupt Mapping register pointer to associated
- * Interrupt Clear register pointer, SYSIO specific version.
- */
-#define SYSIO_ICLR_UNUSED0 0x3400UL
-#define SYSIO_ICLR_SLOT0 0x3408UL
-#define SYSIO_ICLR_SLOT1 0x3448UL
-#define SYSIO_ICLR_SLOT2 0x3488UL
-#define SYSIO_ICLR_SLOT3 0x34c8UL
-static unsigned long sysio_imap_to_iclr(unsigned long imap)
-{
- unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
- return imap + diff;
-}
-
-static unsigned int sbus_of_build_irq(struct device_node *dp,
- unsigned int ino,
- void *_data)
-{
- unsigned long reg_base = (unsigned long) _data;
- const struct linux_prom_registers *regs;
- unsigned long imap, iclr;
- int sbus_slot = 0;
- int sbus_level = 0;
-
- ino &= 0x3f;
-
- regs = of_get_property(dp, "reg", NULL);
- if (regs)
- sbus_slot = regs->which_io;
-
- if (ino < 0x20)
- ino += (sbus_slot * 8);
-
- imap = sysio_irq_offsets[ino];
- if (imap == ((unsigned long)-1)) {
- prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
- ino);
- prom_halt();
- }
- imap += reg_base;
-
- /* SYSIO inconsistency. For external SLOTS, we have to select
- * the right ICLR register based upon the lower SBUS irq level
- * bits.
- */
- if (ino >= 0x20) {
- iclr = sysio_imap_to_iclr(imap);
- } else {
- sbus_level = ino & 0x7;
-
- switch(sbus_slot) {
- case 0:
- iclr = reg_base + SYSIO_ICLR_SLOT0;
- break;
- case 1:
- iclr = reg_base + SYSIO_ICLR_SLOT1;
- break;
- case 2:
- iclr = reg_base + SYSIO_ICLR_SLOT2;
- break;
- default:
- case 3:
- iclr = reg_base + SYSIO_ICLR_SLOT3;
- break;
- };
-
- iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
- }
- return build_irq(sbus_level, iclr, imap);
-}
-
-static void __init sbus_irq_trans_init(struct device_node *dp)
-{
- const struct linux_prom64_registers *regs;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = sbus_of_build_irq;
-
- regs = of_get_property(dp, "reg", NULL);
- dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr;
-}
-#endif /* CONFIG_SBUS */
-
-
-static unsigned int central_build_irq(struct device_node *dp,
- unsigned int ino,
- void *_data)
-{
- struct device_node *central_dp = _data;
- struct of_device *central_op = of_find_device_by_node(central_dp);
- struct resource *res;
- unsigned long imap, iclr;
- u32 tmp;
-
- if (!strcmp(dp->name, "eeprom")) {
- res = ¢ral_op->resource[5];
- } else if (!strcmp(dp->name, "zs")) {
- res = ¢ral_op->resource[4];
- } else if (!strcmp(dp->name, "clock-board")) {
- res = ¢ral_op->resource[3];
- } else {
- return ino;
- }
-
- imap = res->start + 0x00UL;
- iclr = res->start + 0x10UL;
-
- /* Set the INO state to idle, and disable. */
- upa_writel(0, iclr);
- upa_readl(iclr);
-
- tmp = upa_readl(imap);
- tmp &= ~0x80000000;
- upa_writel(tmp, imap);
-
- return build_irq(0, iclr, imap);
-}
-
-static void __init central_irq_trans_init(struct device_node *dp)
-{
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = central_build_irq;
-
- dp->irq_trans->data = dp;
-}
-
-struct irq_trans {
- const char *name;
- void (*init)(struct device_node *);
-};
-
-#ifdef CONFIG_PCI
-static struct irq_trans __initdata pci_irq_trans_table[] = {
- { "SUNW,sabre", sabre_irq_trans_init },
- { "pci108e,a000", sabre_irq_trans_init },
- { "pci108e,a001", sabre_irq_trans_init },
- { "SUNW,psycho", psycho_irq_trans_init },
- { "pci108e,8000", psycho_irq_trans_init },
- { "SUNW,schizo", schizo_irq_trans_init },
- { "pci108e,8001", schizo_irq_trans_init },
- { "SUNW,schizo+", schizo_irq_trans_init },
- { "pci108e,8002", schizo_irq_trans_init },
- { "SUNW,tomatillo", tomatillo_irq_trans_init },
- { "pci108e,a801", tomatillo_irq_trans_init },
- { "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
- { "pciex108e,80f0", fire_irq_trans_init },
-};
-#endif
-
-static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
- unsigned int devino,
- void *_data)
-{
- u32 devhandle = (u32) (unsigned long) _data;
-
- return sun4v_build_irq(devhandle, devino);
-}
-
-static void __init sun4v_vdev_irq_trans_init(struct device_node *dp)
-{
- const struct linux_prom64_registers *regs;
-
- dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
- dp->irq_trans->irq_build = sun4v_vdev_irq_build;
-
- regs = of_get_property(dp, "reg", NULL);
- dp->irq_trans->data = (void *) (unsigned long)
- ((regs->phys_addr >> 32UL) & 0x0fffffff);
-}
-
-static void __init irq_trans_init(struct device_node *dp)
-{
-#ifdef CONFIG_PCI
- const char *model;
- int i;
-#endif
-
-#ifdef CONFIG_PCI
- model = of_get_property(dp, "model", NULL);
- if (!model)
- model = of_get_property(dp, "compatible", NULL);
- if (model) {
- for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
- struct irq_trans *t = &pci_irq_trans_table[i];
-
- if (!strcmp(model, t->name)) {
- t->init(dp);
- return;
- }
- }
- }
-#endif
-#ifdef CONFIG_SBUS
- if (!strcmp(dp->name, "sbus") ||
- !strcmp(dp->name, "sbi")) {
- sbus_irq_trans_init(dp);
- return;
- }
-#endif
- if (!strcmp(dp->name, "fhc") &&
- !strcmp(dp->parent->name, "central")) {
- central_irq_trans_init(dp);
- return;
- }
- if (!strcmp(dp->name, "virtual-devices") ||
- !strcmp(dp->name, "niu")) {
- sun4v_vdev_irq_trans_init(dp);
- return;
- }
-}
-
static int is_root_node(const struct device_node *dp)
{
if (!dp)
diff --git a/arch/sparc/kernel/prom_irqtrans.c b/arch/sparc/kernel/prom_irqtrans.c
new file mode 100644
index 0000000..96958c4
--- /dev/null
+++ b/arch/sparc/kernel/prom_irqtrans.c
@@ -0,0 +1,842 @@
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+#include <asm/upa.h>
+
+#include "prom.h"
+
+#ifdef CONFIG_PCI
+/* PSYCHO interrupt mapping support. */
+#define PSYCHO_IMAP_A_SLOT0 0x0c00UL
+#define PSYCHO_IMAP_B_SLOT0 0x0c20UL
+static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
+{
+ unsigned int bus = (ino & 0x10) >> 4;
+ unsigned int slot = (ino & 0x0c) >> 2;
+
+ if (bus == 0)
+ return PSYCHO_IMAP_A_SLOT0 + (slot * 8);
+ else
+ return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
+}
+
+#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
+
+#define PSYCHO_ONBOARD_IRQ_BASE 0x20
+#define psycho_onboard_imap_offset(__ino) \
+ (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
+
+#define PSYCHO_ICLR_A_SLOT0 0x1400UL
+#define PSYCHO_ICLR_SCSI 0x1800UL
+
+#define psycho_iclr_offset(ino) \
+ ((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
+ (PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
+
+static unsigned int psycho_irq_build(struct device_node *dp,
+ unsigned int ino,
+ void *_data)
+{
+ unsigned long controller_regs = (unsigned long) _data;
+ unsigned long imap, iclr;
+ unsigned long imap_off, iclr_off;
+ int inofixup = 0;
+
+ ino &= 0x3f;
+ if (ino < PSYCHO_ONBOARD_IRQ_BASE) {
+ /* PCI slot */
+ imap_off = psycho_pcislot_imap_offset(ino);
+ } else {
+ /* Onboard device */
+ imap_off = psycho_onboard_imap_offset(ino);
+ }
+
+ /* Now build the IRQ bucket. */
+ imap = controller_regs + imap_off;
+
+ iclr_off = psycho_iclr_offset(ino);
+ iclr = controller_regs + iclr_off;
+
+ if ((ino & 0x20) == 0)
+ inofixup = ino & 0x03;
+
+ return build_irq(inofixup, iclr, imap);
+}
+
+static void __init psycho_irq_trans_init(struct device_node *dp)
+{
+ const struct linux_prom64_registers *regs;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = psycho_irq_build;
+
+ regs = of_get_property(dp, "reg", NULL);
+ dp->irq_trans->data = (void *) regs[2].phys_addr;
+}
+
+#define sabre_read(__reg) \
+({ u64 __ret; \
+ __asm__ __volatile__("ldxa [%1] %2, %0" \
+ : "=r" (__ret) \
+ : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
+ : "memory"); \
+ __ret; \
+})
+
+struct sabre_irq_data {
+ unsigned long controller_regs;
+ unsigned int pci_first_busno;
+};
+#define SABRE_CONFIGSPACE 0x001000000UL
+#define SABRE_WRSYNC 0x1c20UL
+
+#define SABRE_CONFIG_BASE(CONFIG_SPACE) \
+ (CONFIG_SPACE | (1UL << 24))
+#define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
+ (((unsigned long)(BUS) << 16) | \
+ ((unsigned long)(DEVFN) << 8) | \
+ ((unsigned long)(REG)))
+
+/* When a device lives behind a bridge deeper in the PCI bus topology
+ * than APB, a special sequence must run to make sure all pending DMA
+ * transfers at the time of IRQ delivery are visible in the coherency
+ * domain by the cpu. This sequence is to perform a read on the far
+ * side of the non-APB bridge, then perform a read of Sabre's DMA
+ * write-sync register.
+ */
+static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
+{
+ unsigned int phys_hi = (unsigned int) (unsigned long) _arg1;
+ struct sabre_irq_data *irq_data = _arg2;
+ unsigned long controller_regs = irq_data->controller_regs;
+ unsigned long sync_reg = controller_regs + SABRE_WRSYNC;
+ unsigned long config_space = controller_regs + SABRE_CONFIGSPACE;
+ unsigned int bus, devfn;
+ u16 _unused;
+
+ config_space = SABRE_CONFIG_BASE(config_space);
+
+ bus = (phys_hi >> 16) & 0xff;
+ devfn = (phys_hi >> 8) & 0xff;
+
+ config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00);
+
+ __asm__ __volatile__("membar #Sync\n\t"
+ "lduha [%1] %2, %0\n\t"
+ "membar #Sync"
+ : "=r" (_unused)
+ : "r" ((u16 *) config_space),
+ "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
+
+ sabre_read(sync_reg);
+}
+
+#define SABRE_IMAP_A_SLOT0 0x0c00UL
+#define SABRE_IMAP_B_SLOT0 0x0c20UL
+#define SABRE_ICLR_A_SLOT0 0x1400UL
+#define SABRE_ICLR_B_SLOT0 0x1480UL
+#define SABRE_ICLR_SCSI 0x1800UL
+#define SABRE_ICLR_ETH 0x1808UL
+#define SABRE_ICLR_BPP 0x1810UL
+#define SABRE_ICLR_AU_REC 0x1818UL
+#define SABRE_ICLR_AU_PLAY 0x1820UL
+#define SABRE_ICLR_PFAIL 0x1828UL
+#define SABRE_ICLR_KMS 0x1830UL
+#define SABRE_ICLR_FLPY 0x1838UL
+#define SABRE_ICLR_SHW 0x1840UL
+#define SABRE_ICLR_KBD 0x1848UL
+#define SABRE_ICLR_MS 0x1850UL
+#define SABRE_ICLR_SER 0x1858UL
+#define SABRE_ICLR_UE 0x1870UL
+#define SABRE_ICLR_CE 0x1878UL
+#define SABRE_ICLR_PCIERR 0x1880UL
+
+static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
+{
+ unsigned int bus = (ino & 0x10) >> 4;
+ unsigned int slot = (ino & 0x0c) >> 2;
+
+ if (bus == 0)
+ return SABRE_IMAP_A_SLOT0 + (slot * 8);
+ else
+ return SABRE_IMAP_B_SLOT0 + (slot * 8);
+}
+
+#define SABRE_OBIO_IMAP_BASE 0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE 0x20
+#define sabre_onboard_imap_offset(__ino) \
+ (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
+
+#define sabre_iclr_offset(ino) \
+ ((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
+ (SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
+
+static int sabre_device_needs_wsync(struct device_node *dp)
+{
+ struct device_node *parent = dp->parent;
+ const char *parent_model, *parent_compat;
+
+ /* This traversal up towards the root is meant to
+ * handle two cases:
+ *
+ * 1) non-PCI bus sitting under PCI, such as 'ebus'
+ * 2) the PCI controller interrupts themselves, which
+ * will use the sabre_irq_build but do not need
+ * the DMA synchronization handling
+ */
+ while (parent) {
+ if (!strcmp(parent->type, "pci"))
+ break;
+ parent = parent->parent;
+ }
+
+ if (!parent)
+ return 0;
+
+ parent_model = of_get_property(parent,
+ "model", NULL);
+ if (parent_model &&
+ (!strcmp(parent_model, "SUNW,sabre") ||
+ !strcmp(parent_model, "SUNW,simba")))
+ return 0;
+
+ parent_compat = of_get_property(parent,
+ "compatible", NULL);
+ if (parent_compat &&
+ (!strcmp(parent_compat, "pci108e,a000") ||
+ !strcmp(parent_compat, "pci108e,a001")))
+ return 0;
+
+ return 1;
+}
+
+static unsigned int sabre_irq_build(struct device_node *dp,
+ unsigned int ino,
+ void *_data)
+{
+ struct sabre_irq_data *irq_data = _data;
+ unsigned long controller_regs = irq_data->controller_regs;
+ const struct linux_prom_pci_registers *regs;
+ unsigned long imap, iclr;
+ unsigned long imap_off, iclr_off;
+ int inofixup = 0;
+ int virt_irq;
+
+ ino &= 0x3f;
+ if (ino < SABRE_ONBOARD_IRQ_BASE) {
+ /* PCI slot */
+ imap_off = sabre_pcislot_imap_offset(ino);
+ } else {
+ /* onboard device */
+ imap_off = sabre_onboard_imap_offset(ino);
+ }
+
+ /* Now build the IRQ bucket. */
+ imap = controller_regs + imap_off;
+
+ iclr_off = sabre_iclr_offset(ino);
+ iclr = controller_regs + iclr_off;
+
+ if ((ino & 0x20) == 0)
+ inofixup = ino & 0x03;
+
+ virt_irq = build_irq(inofixup, iclr, imap);
+
+ /* If the parent device is a PCI<->PCI bridge other than
+ * APB, we have to install a pre-handler to ensure that
+ * all pending DMA is drained before the interrupt handler
+ * is run.
+ */
+ regs = of_get_property(dp, "reg", NULL);
+ if (regs && sabre_device_needs_wsync(dp)) {
+ irq_install_pre_handler(virt_irq,
+ sabre_wsync_handler,
+ (void *) (long) regs->phys_hi,
+ (void *) irq_data);
+ }
+
+ return virt_irq;
+}
+
+static void __init sabre_irq_trans_init(struct device_node *dp)
+{
+ const struct linux_prom64_registers *regs;
+ struct sabre_irq_data *irq_data;
+ const u32 *busrange;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = sabre_irq_build;
+
+ irq_data = prom_early_alloc(sizeof(struct sabre_irq_data));
+
+ regs = of_get_property(dp, "reg", NULL);
+ irq_data->controller_regs = regs[0].phys_addr;
+
+ busrange = of_get_property(dp, "bus-range", NULL);
+ irq_data->pci_first_busno = busrange[0];
+
+ dp->irq_trans->data = irq_data;
+}
+
+/* SCHIZO interrupt mapping support. Unlike Psycho, for this controller the
+ * imap/iclr registers are per-PBM.
+ */
+#define SCHIZO_IMAP_BASE 0x1000UL
+#define SCHIZO_ICLR_BASE 0x1400UL
+
+static unsigned long schizo_imap_offset(unsigned long ino)
+{
+ return SCHIZO_IMAP_BASE + (ino * 8UL);
+}
+
+static unsigned long schizo_iclr_offset(unsigned long ino)
+{
+ return SCHIZO_ICLR_BASE + (ino * 8UL);
+}
+
+static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
+ unsigned int ino)
+{
+
+ return pbm_regs + schizo_iclr_offset(ino);
+}
+
+static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
+ unsigned int ino)
+{
+ return pbm_regs + schizo_imap_offset(ino);
+}
+
+#define schizo_read(__reg) \
+({ u64 __ret; \
+ __asm__ __volatile__("ldxa [%1] %2, %0" \
+ : "=r" (__ret) \
+ : "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
+ : "memory"); \
+ __ret; \
+})
+#define schizo_write(__reg, __val) \
+ __asm__ __volatile__("stxa %0, [%1] %2" \
+ : /* no outputs */ \
+ : "r" (__val), "r" (__reg), \
+ "i" (ASI_PHYS_BYPASS_EC_E) \
+ : "memory")
+
+static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
+{
+ unsigned long sync_reg = (unsigned long) _arg2;
+ u64 mask = 1UL << (ino & IMAP_INO);
+ u64 val;
+ int limit;
+
+ schizo_write(sync_reg, mask);
+
+ limit = 100000;
+ val = 0;
+ while (--limit) {
+ val = schizo_read(sync_reg);
+ if (!(val & mask))
+ break;
+ }
+ if (limit <= 0) {
+ printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n",
+ val, mask);
+ }
+
+ if (_arg1) {
+ static unsigned char cacheline[64]
+ __attribute__ ((aligned (64)));
+
+ __asm__ __volatile__("rd %%fprs, %0\n\t"
+ "or %0, %4, %1\n\t"
+ "wr %1, 0x0, %%fprs\n\t"
+ "stda %%f0, [%5] %6\n\t"
+ "wr %0, 0x0, %%fprs\n\t"
+ "membar #Sync"
+ : "=&r" (mask), "=&r" (val)
+ : "0" (mask), "1" (val),
+ "i" (FPRS_FEF), "r" (&cacheline[0]),
+ "i" (ASI_BLK_COMMIT_P));
+ }
+}
+
+struct schizo_irq_data {
+ unsigned long pbm_regs;
+ unsigned long sync_reg;
+ u32 portid;
+ int chip_version;
+};
+
+static unsigned int schizo_irq_build(struct device_node *dp,
+ unsigned int ino,
+ void *_data)
+{
+ struct schizo_irq_data *irq_data = _data;
+ unsigned long pbm_regs = irq_data->pbm_regs;
+ unsigned long imap, iclr;
+ int ign_fixup;
+ int virt_irq;
+ int is_tomatillo;
+
+ ino &= 0x3f;
+
+ /* Now build the IRQ bucket. */
+ imap = schizo_ino_to_imap(pbm_regs, ino);
+ iclr = schizo_ino_to_iclr(pbm_regs, ino);
+
+ /* On Schizo, no inofixup occurs. This is because each
+ * INO has it's own IMAP register. On Psycho and Sabre
+ * there is only one IMAP register for each PCI slot even
+ * though four different INOs can be generated by each
+ * PCI slot.
+ *
+ * But, for JBUS variants (essentially, Tomatillo), we have
+ * to fixup the lowest bit of the interrupt group number.
+ */
+ ign_fixup = 0;
+
+ is_tomatillo = (irq_data->sync_reg != 0UL);
+
+ if (is_tomatillo) {
+ if (irq_data->portid & 1)
+ ign_fixup = (1 << 6);
+ }
+
+ virt_irq = build_irq(ign_fixup, iclr, imap);
+
+ if (is_tomatillo) {
+ irq_install_pre_handler(virt_irq,
+ tomatillo_wsync_handler,
+ ((irq_data->chip_version <= 4) ?
+ (void *) 1 : (void *) 0),
+ (void *) irq_data->sync_reg);
+ }
+
+ return virt_irq;
+}
+
+static void __init __schizo_irq_trans_init(struct device_node *dp,
+ int is_tomatillo)
+{
+ const struct linux_prom64_registers *regs;
+ struct schizo_irq_data *irq_data;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = schizo_irq_build;
+
+ irq_data = prom_early_alloc(sizeof(struct schizo_irq_data));
+
+ regs = of_get_property(dp, "reg", NULL);
+ dp->irq_trans->data = irq_data;
+
+ irq_data->pbm_regs = regs[0].phys_addr;
+ if (is_tomatillo)
+ irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL;
+ else
+ irq_data->sync_reg = 0UL;
+ irq_data->portid = of_getintprop_default(dp, "portid", 0);
+ irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
+}
+
+static void __init schizo_irq_trans_init(struct device_node *dp)
+{
+ __schizo_irq_trans_init(dp, 0);
+}
+
+static void __init tomatillo_irq_trans_init(struct device_node *dp)
+{
+ __schizo_irq_trans_init(dp, 1);
+}
+
+static unsigned int pci_sun4v_irq_build(struct device_node *dp,
+ unsigned int devino,
+ void *_data)
+{
+ u32 devhandle = (u32) (unsigned long) _data;
+
+ return sun4v_build_irq(devhandle, devino);
+}
+
+static void __init pci_sun4v_irq_trans_init(struct device_node *dp)
+{
+ const struct linux_prom64_registers *regs;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = pci_sun4v_irq_build;
+
+ regs = of_get_property(dp, "reg", NULL);
+ dp->irq_trans->data = (void *) (unsigned long)
+ ((regs->phys_addr >> 32UL) & 0x0fffffff);
+}
+
+struct fire_irq_data {
+ unsigned long pbm_regs;
+ u32 portid;
+};
+
+#define FIRE_IMAP_BASE 0x001000
+#define FIRE_ICLR_BASE 0x001400
+
+static unsigned long fire_imap_offset(unsigned long ino)
+{
+ return FIRE_IMAP_BASE + (ino * 8UL);
+}
+
+static unsigned long fire_iclr_offset(unsigned long ino)
+{
+ return FIRE_ICLR_BASE + (ino * 8UL);
+}
+
+static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
+ unsigned int ino)
+{
+ return pbm_regs + fire_iclr_offset(ino);
+}
+
+static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
+ unsigned int ino)
+{
+ return pbm_regs + fire_imap_offset(ino);
+}
+
+static unsigned int fire_irq_build(struct device_node *dp,
+ unsigned int ino,
+ void *_data)
+{
+ struct fire_irq_data *irq_data = _data;
+ unsigned long pbm_regs = irq_data->pbm_regs;
+ unsigned long imap, iclr;
+ unsigned long int_ctrlr;
+
+ ino &= 0x3f;
+
+ /* Now build the IRQ bucket. */
+ imap = fire_ino_to_imap(pbm_regs, ino);
+ iclr = fire_ino_to_iclr(pbm_regs, ino);
+
+ /* Set the interrupt controller number. */
+ int_ctrlr = 1 << 6;
+ upa_writeq(int_ctrlr, imap);
+
+ /* The interrupt map registers do not have an INO field
+ * like other chips do. They return zero in the INO
+ * field, and the interrupt controller number is controlled
+ * in bits 6 to 9. So in order for build_irq() to get
+ * the INO right we pass it in as part of the fixup
+ * which will get added to the map register zero value
+ * read by build_irq().
+ */
+ ino |= (irq_data->portid << 6);
+ ino -= int_ctrlr;
+ return build_irq(ino, iclr, imap);
+}
+
+static void __init fire_irq_trans_init(struct device_node *dp)
+{
+ const struct linux_prom64_registers *regs;
+ struct fire_irq_data *irq_data;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = fire_irq_build;
+
+ irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
+
+ regs = of_get_property(dp, "reg", NULL);
+ dp->irq_trans->data = irq_data;
+
+ irq_data->pbm_regs = regs[0].phys_addr;
+ irq_data->portid = of_getintprop_default(dp, "portid", 0);
+}
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_SBUS
+/* INO number to IMAP register offset for SYSIO external IRQ's.
+ * This should conform to both Sunfire/Wildfire server and Fusion
+ * desktop designs.
+ */
+#define SYSIO_IMAP_SLOT0 0x2c00UL
+#define SYSIO_IMAP_SLOT1 0x2c08UL
+#define SYSIO_IMAP_SLOT2 0x2c10UL
+#define SYSIO_IMAP_SLOT3 0x2c18UL
+#define SYSIO_IMAP_SCSI 0x3000UL
+#define SYSIO_IMAP_ETH 0x3008UL
+#define SYSIO_IMAP_BPP 0x3010UL
+#define SYSIO_IMAP_AUDIO 0x3018UL
+#define SYSIO_IMAP_PFAIL 0x3020UL
+#define SYSIO_IMAP_KMS 0x3028UL
+#define SYSIO_IMAP_FLPY 0x3030UL
+#define SYSIO_IMAP_SHW 0x3038UL
+#define SYSIO_IMAP_KBD 0x3040UL
+#define SYSIO_IMAP_MS 0x3048UL
+#define SYSIO_IMAP_SER 0x3050UL
+#define SYSIO_IMAP_TIM0 0x3060UL
+#define SYSIO_IMAP_TIM1 0x3068UL
+#define SYSIO_IMAP_UE 0x3070UL
+#define SYSIO_IMAP_CE 0x3078UL
+#define SYSIO_IMAP_SBERR 0x3080UL
+#define SYSIO_IMAP_PMGMT 0x3088UL
+#define SYSIO_IMAP_GFX 0x3090UL
+#define SYSIO_IMAP_EUPA 0x3098UL
+
+#define bogon ((unsigned long) -1)
+static unsigned long sysio_irq_offsets[] = {
+ /* SBUS Slot 0 --> 3, level 1 --> 7 */
+ SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
+ SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
+ SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
+ SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
+ SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
+ SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
+ SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
+ SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
+
+ /* Onboard devices (not relevant/used on SunFire). */
+ SYSIO_IMAP_SCSI,
+ SYSIO_IMAP_ETH,
+ SYSIO_IMAP_BPP,
+ bogon,
+ SYSIO_IMAP_AUDIO,
+ SYSIO_IMAP_PFAIL,
+ bogon,
+ bogon,
+ SYSIO_IMAP_KMS,
+ SYSIO_IMAP_FLPY,
+ SYSIO_IMAP_SHW,
+ SYSIO_IMAP_KBD,
+ SYSIO_IMAP_MS,
+ SYSIO_IMAP_SER,
+ bogon,
+ bogon,
+ SYSIO_IMAP_TIM0,
+ SYSIO_IMAP_TIM1,
+ bogon,
+ bogon,
+ SYSIO_IMAP_UE,
+ SYSIO_IMAP_CE,
+ SYSIO_IMAP_SBERR,
+ SYSIO_IMAP_PMGMT,
+ SYSIO_IMAP_GFX,
+ SYSIO_IMAP_EUPA,
+};
+
+#undef bogon
+
+#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
+
+/* Convert Interrupt Mapping register pointer to associated
+ * Interrupt Clear register pointer, SYSIO specific version.
+ */
+#define SYSIO_ICLR_UNUSED0 0x3400UL
+#define SYSIO_ICLR_SLOT0 0x3408UL
+#define SYSIO_ICLR_SLOT1 0x3448UL
+#define SYSIO_ICLR_SLOT2 0x3488UL
+#define SYSIO_ICLR_SLOT3 0x34c8UL
+static unsigned long sysio_imap_to_iclr(unsigned long imap)
+{
+ unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
+ return imap + diff;
+}
+
+static unsigned int sbus_of_build_irq(struct device_node *dp,
+ unsigned int ino,
+ void *_data)
+{
+ unsigned long reg_base = (unsigned long) _data;
+ const struct linux_prom_registers *regs;
+ unsigned long imap, iclr;
+ int sbus_slot = 0;
+ int sbus_level = 0;
+
+ ino &= 0x3f;
+
+ regs = of_get_property(dp, "reg", NULL);
+ if (regs)
+ sbus_slot = regs->which_io;
+
+ if (ino < 0x20)
+ ino += (sbus_slot * 8);
+
+ imap = sysio_irq_offsets[ino];
+ if (imap == ((unsigned long)-1)) {
+ prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
+ ino);
+ prom_halt();
+ }
+ imap += reg_base;
+
+ /* SYSIO inconsistency. For external SLOTS, we have to select
+ * the right ICLR register based upon the lower SBUS irq level
+ * bits.
+ */
+ if (ino >= 0x20) {
+ iclr = sysio_imap_to_iclr(imap);
+ } else {
+ sbus_level = ino & 0x7;
+
+ switch(sbus_slot) {
+ case 0:
+ iclr = reg_base + SYSIO_ICLR_SLOT0;
+ break;
+ case 1:
+ iclr = reg_base + SYSIO_ICLR_SLOT1;
+ break;
+ case 2:
+ iclr = reg_base + SYSIO_ICLR_SLOT2;
+ break;
+ default:
+ case 3:
+ iclr = reg_base + SYSIO_ICLR_SLOT3;
+ break;
+ };
+
+ iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
+ }
+ return build_irq(sbus_level, iclr, imap);
+}
+
+static void __init sbus_irq_trans_init(struct device_node *dp)
+{
+ const struct linux_prom64_registers *regs;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = sbus_of_build_irq;
+
+ regs = of_get_property(dp, "reg", NULL);
+ dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr;
+}
+#endif /* CONFIG_SBUS */
+
+
+static unsigned int central_build_irq(struct device_node *dp,
+ unsigned int ino,
+ void *_data)
+{
+ struct device_node *central_dp = _data;
+ struct of_device *central_op = of_find_device_by_node(central_dp);
+ struct resource *res;
+ unsigned long imap, iclr;
+ u32 tmp;
+
+ if (!strcmp(dp->name, "eeprom")) {
+ res = ¢ral_op->resource[5];
+ } else if (!strcmp(dp->name, "zs")) {
+ res = ¢ral_op->resource[4];
+ } else if (!strcmp(dp->name, "clock-board")) {
+ res = ¢ral_op->resource[3];
+ } else {
+ return ino;
+ }
+
+ imap = res->start + 0x00UL;
+ iclr = res->start + 0x10UL;
+
+ /* Set the INO state to idle, and disable. */
+ upa_writel(0, iclr);
+ upa_readl(iclr);
+
+ tmp = upa_readl(imap);
+ tmp &= ~0x80000000;
+ upa_writel(tmp, imap);
+
+ return build_irq(0, iclr, imap);
+}
+
+static void __init central_irq_trans_init(struct device_node *dp)
+{
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = central_build_irq;
+
+ dp->irq_trans->data = dp;
+}
+
+struct irq_trans {
+ const char *name;
+ void (*init)(struct device_node *);
+};
+
+#ifdef CONFIG_PCI
+static struct irq_trans __initdata pci_irq_trans_table[] = {
+ { "SUNW,sabre", sabre_irq_trans_init },
+ { "pci108e,a000", sabre_irq_trans_init },
+ { "pci108e,a001", sabre_irq_trans_init },
+ { "SUNW,psycho", psycho_irq_trans_init },
+ { "pci108e,8000", psycho_irq_trans_init },
+ { "SUNW,schizo", schizo_irq_trans_init },
+ { "pci108e,8001", schizo_irq_trans_init },
+ { "SUNW,schizo+", schizo_irq_trans_init },
+ { "pci108e,8002", schizo_irq_trans_init },
+ { "SUNW,tomatillo", tomatillo_irq_trans_init },
+ { "pci108e,a801", tomatillo_irq_trans_init },
+ { "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
+ { "pciex108e,80f0", fire_irq_trans_init },
+};
+#endif
+
+static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
+ unsigned int devino,
+ void *_data)
+{
+ u32 devhandle = (u32) (unsigned long) _data;
+
+ return sun4v_build_irq(devhandle, devino);
+}
+
+static void __init sun4v_vdev_irq_trans_init(struct device_node *dp)
+{
+ const struct linux_prom64_registers *regs;
+
+ dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+ dp->irq_trans->irq_build = sun4v_vdev_irq_build;
+
+ regs = of_get_property(dp, "reg", NULL);
+ dp->irq_trans->data = (void *) (unsigned long)
+ ((regs->phys_addr >> 32UL) & 0x0fffffff);
+}
+
+void __init irq_trans_init(struct device_node *dp)
+{
+#ifdef CONFIG_PCI
+ const char *model;
+ int i;
+#endif
+
+#ifdef CONFIG_PCI
+ model = of_get_property(dp, "model", NULL);
+ if (!model)
+ model = of_get_property(dp, "compatible", NULL);
+ if (model) {
+ for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
+ struct irq_trans *t = &pci_irq_trans_table[i];
+
+ if (!strcmp(model, t->name)) {
+ t->init(dp);
+ return;
+ }
+ }
+ }
+#endif
+#ifdef CONFIG_SBUS
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi")) {
+ sbus_irq_trans_init(dp);
+ return;
+ }
+#endif
+ if (!strcmp(dp->name, "fhc") &&
+ !strcmp(dp->parent->name, "central")) {
+ central_irq_trans_init(dp);
+ return;
+ }
+ if (!strcmp(dp->name, "virtual-devices") ||
+ !strcmp(dp->name, "niu")) {
+ sun4v_vdev_irq_trans_init(dp);
+ return;
+ }
+}
--
1.5.6.5
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
