On Tue, Sep 09, 2008 at 04:39:32PM +0200, Josip Rodin wrote:
> On Mon, Sep 08, 2008 at 07:01:02PM -0700, Andrew Vasquez wrote:
> > Yes, please do try the patch. Could you also enable error-logging via
> > the ql2xextended_error_logging module parameter:
> >
> > # insmod qla2xxx.ko ql2xextended_error_logging=1
> >
> > And send the kernel messages... Thanks, AV
>
> OK, I reset the bisection, pulled the latest updates, applied your patch
> and added the parameter to the initrd module setup, rebuilt after an
> all-enter make oldconfig. After rebooting, it failed to load the firmware:
>
> scsi(0): **** Load RISC code ****
> firmware: requesting ql2200_fw.bin
> scsi(0): Failed to load firmware image (ql2200_fw.bin).
> qla2xxx 0001:00:04.0: Firmware image unavailable.
OK, so I did git reset --hard bed475c4cde5d12f537f445bdd0a5a3bb5684481
to get back to the point which the bisection said was the problem, and
yet that version of 2.6.27-rc2 also exhibited the firmware problem.
Then I went back up to git reset --hard bf6583b5831d3195c45f98ec3016499389cbe18f
to see if it'll do that again, and that 2.6.26 *also* did the same.
So I reviewed my steps and concluded that the only other thing different was
adding ql2xextended_error_logging=1. I undid that change, rebuilt the
initramfs image, and then the machine booted fine!
So, um, please fix the debugging code so that it doesn't cause more bugs... :/
In the meantime, I'll go back up to bed475c4cde5d12f537f445bdd0a5a3bb5684481
and see how it does with the debugging patch.
--
2. That which causes joy or happiness.
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
