Im getting an opps switching to init with kernel-2.6.25-0.151.rc6.git7.fc9 build logs from the kernel can be found at http://sparc.koji.fedoraproject.org/packages/kernel/2.6.25/0.151.rc6.git7.fc9/data/logs/sparc64/ the kernel was built with gcc-4.3.0-3 it has the recent patches for big kernel images applied. Sun Netra X1 (UltraSPARC-IIe 400MHz), No Keyboard OpenBoot 4.0, 1024 MB memory installed, Serial #50714290. Ethernet address 0:3:ba:5:d6:b2, Host ID: 8305d6b2. Executing last command: boot Boot device: disk File and args: SILO Version 1.4.13 \ Welcome to Aurora! Hit <TAB> for boot options boot: 2.6.25-0.151.rc 2.6.23.1-26.5.a boot: 2.6.25-0.151.rc enforcing=0 Allocated 64 Megs of memory at 0x40000000 for kernel Loaded kernel version 2.6.25 Loading initial ramdisk (7471887 bytes at 0x6F000000 phys, 0x40C00000 virt)... - PROMLIB: Sun IEEE Boot Prom 'OBP 4.0.6 2001/02/19 09:56' PROMLIB: Root node compatible: sun4u Initializing cgroup subsys cpu Linux version 2.6.25-0.151.rc6.git7.fc9 (mockbuild@) (gcc version 4.3.0 20080314 (Red Hat 4.3.0-3) (GCC) ) #1 Mon Mar 24 23:44:17 EDT 2008 console [earlyprom0] enabled ARCH: SUN4U Ethernet address: 00:03:ba:05:d6:b2 Kernel: Using 2 locked TLB entries for main kernel image. Remapping the kernel... done. [0000000200000000-fffff80000400000] page_structs=262144 node=0 entry=0/0 [0000000200000000-fffff80000800000] page_structs=262144 node=0 entry=1/0 [0000000200000000-fffff80000c00000] page_structs=262144 node=0 entry=2/0 [0000000200000000-fffff80001000000] page_structs=262144 node=0 entry=3/0 Allocated 1056768 bytes for kernel page tables. OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8 PROM: Built device tree with 45756 bytes of memory. Booting Linux... Built 1 zonelists in Zone order, mobility grouping on. Total pages: 128740 Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=ttyS0,9600n8 enforcing=0 PID hash table entries: 4096 (order: 12, 32768 bytes) clocksource: mult[b40001] shift[16] clockevent: mult[16c16bf] shift[32] Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 6, 524288 bytes) Memory: 1014992k available (2672k kernel code, 1176k data, 160k init) [fffff80000000000,000000006fec8000] SLUB: Genslabs=13, HWalign=32, Order=0-2, MinObjects=8, CPUs=1, Nodes=1 Calibrating delay using timer specific routine.. 11.14 BogoMIPS (lpj=55702) Security Framework initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct khelper used greatest stack depth: 10384 bytes left net_namespace: 1040 bytes NET: Registered protocol family 16 PCI: Probing for controllers. /pci@1f,0: SABRE PCI Bus Module /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000] PCI: Scanning PBM /pci@1f,0 pci 0000:00:03.0: quirk: region 2000-203f claimed by ali7101 ACPI pci 0000:00:03.0: quirk: region 4000-401f claimed by ali7101 SMB isa0: [dma] [rtc] [power] [SUNW,lomh] [serial] [serial] [flashprom] ebus: No EBus's found. power: Control reg at 1fe02002000 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default /pci@1f,0/isa@7/rtc@0,70: Clock regs at 000001fe02000070 Time: hbtick clocksource has been installed. NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 65536 bytes) TCP established hash table entries: 32768 (order: 6, 524288 bytes) TCP bind hash table entries: 32768 (order: 7, 1048576 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 7296k freed Mini RTC Driver audit: initializing netlink socket (disabled) type=2000 audit(1206463038.364:1): initialized Total HugeTLB memory allocated, 0 khelper used greatest stack depth: 10048 bytes left VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:07.0: Activating ISA DMA hang workarounds f0075d40: ttyS0 at MMIO 0x1fe020003f8 (irq = 7) is a 16550A Console: ttyS0 (SU) console handover: boot [earlyprom0] -> real [ttyS0] f0077a2c: ttyS1 at MMIO 0x1fe020002e8 (irq = 7) is a 16550A khelper used greatest stack depth: 10016 bytes left brd: module loaded mice: PS/2 mouse device common for all mice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Red Hat nash version 6.0.40 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. Loading ehci-hcd mmodprobe used greatest stack depth: 0 bytes left odule Loading ohci-hcd module ohci_hcd 0000:00:0a.0: OHCI Host Controller ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:0a.0: irq 11, io mem 0x1ff01000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-0.151.rc6.git7.fc9 ohci_hcd usb usb1: SerialNumber: 0000:00:0a.0 Loading uhci-hcd module USB Universal Host Controller Interface driver v3.0 Loading ext3 module Loading scsi_mod module SCSI subsystem initialized Loading sd_mod module Driver 'sd' needs updating - please use bus_type methods Loading libata module Loading pata_ali module scsi0 : pata_ali scsi1 : pata_ali ata1: PATA max UDMA/66 cmd 0x1fe02010200 ctl 0x1fe02010218 bmdma 0x1fe02010220 irq 12 ata2: PATA max UDMA/66 cmd 0x1fe02010210 ctl 0x1fe02010208 bmdma 0x1fe02010228 irq 12 ata1.00: ATA-5: QUANTUM FIREBALLP LM10.2, A35.0700, max UDMA/66 ata1.00: 19925880 sectors, multi 0: LBA ata1.00: configured for UDMA/66 ata2.00: ATA-6: WDC WD800BB-22FJA0, 13.03G13, max UDMA/100 ata2.00: 156301488 sectors, multi 0: LBA ata2.00: configured for UDMA/66 scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A35. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 19925880 512-byte hardware sectors (10202 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 19925880 512-byte hardware sectors (10202 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: Direct-Access ATA WDC WD800BB-22FJ 13.0 PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb3 sd 1:0:0:0: [sdb] Attached SCSI disk Waiting for driver initialization. Loading ata_generic module Loading dm-mod module device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx Loading dm-mirror module Loading dm-zero module Loading dm-snapshot module Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults security: class memprotect not defined in policy security: class peer not defined in policy security: class capability2 not defined in policy security: permission recvfrom in class node not defined in policy security: permission sendto in class node not defined in policy security: permission ingress in class netif not defined in policy security: permission egress in class netif not defined in policy security: permission setfcap in class capability not defined in policy security: permission forward_in in class packet not defined in policy security: permission forward_out in class packet not defined in policy SELinux: policy loaded with handle_unknown=deny type=1403 audit(1206463052.898:2): policy loaded auid=4294967295 ses=4294967295 Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys Unable to handle kernel paging request at virtual address fffff8006cbe0000 tsk->{mm,active_mm}->context = 0000000000000027 tsk->{mm,active_mm}->pgd = fffff8006c1ce000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ sh(388): Oops [#1] TSTATE: 0000004411009605 TPC: 0000000000563390 TNPC: 0000000000563394 Y: 00000000 Not tainted TPC: <___copy_to_user+0x1218/0x13c0> g0: 0000000000330000 g1: 0000000000000011 g2: 0000000000000000 g3: 0000000000000000 g4: fffff8006e1af020 g5: 0000000000260100 g6: fffff8006cbdc000 g7: 0000000000000080 o0: 000007feffac8d68 o1: fffff8006cbe0000 o2: 0000000000000000 o3: 00000ffe92ee8d68 o4: 000007feffac8d68 o5: fffff80100260120 sp: fffff8006cbdf521 ret_pc: 0000000000432f68 RPC: <do_notify_resume+0x200/0x584> l0: fffff801004917c8 l1: 0000000000000005 l2: fffff8006e1af490 l3: 0000000000000000 l4: 0000000000000000 l5: 0000000000000014 l6: 0000000000000000 l7: fffff8010048c000 i0: fffff8006cbdff60 i1: 000007feffac8d68 i2: fffff8006cbe0000 i3: 000007feffac8b60 i4: 0000000000000000 i5: 0000000000000000 i6: fffff8006cbdf6a1 i7: 0000000000404a9c I7: <__handle_signal+0x18/0x34> Caller[0000000000404a9c]: __handle_signal+0x18/0x34 Caller[000000000013b91c]: 0x13b924 Instruction DUMP: 96220009 8e2aa00f 940aa00f <da5a6000> c25a6008 8ea1e010 daf2422b 92026008 c2f2422b init: rcS main process (388) killed by KILL signal
Attachment:
signature.asc
Description: This is a digitally signed message part.
