Good news,
With kernel (2.6.24.2) and libc6 I have uploaded, SS20 boots fine with
dual RT626 (double CPU module). At this time, I don't see any strange
memory error I have seen with older kernel. I shall try with four RT626
this evening, but it sounds good :
hilbert:[~] > cat /proc/cpuinfo
cpu : ROSS HyperSparc RT625 or RT626
fpu : ROSS HyperSparc combined IU/FPU
promlib : Version 3 Revision 2
prom : 2.25
type : sun4m
ncpus probed : 2
ncpus active : 2
Cpu0Bogo : 199.88
Cpu1Bogo : 199.88
MMU type : ROSS HyperSparc
contexts : 4096
nocache total : 5242880
nocache used : 904704
State:
CPU0 : online
CPU1 : online
I only receive in dmesg :
WARNING: at mm/vmalloc.c:105 vmap_pte_range()
[f005a93c : sys_init_module+0x70/0x1b64 ] [f00155c8 :
syscall_is_too_hard+0x3c/0x40 ] [000133b8 : 0x133c0 ]
WARNING: at mm/vmalloc.c:105 vmap_pte_range()
[f005a93c : sys_init_module+0x70/0x1b64 ] [f00155c8 :
syscall_is_too_hard+0x3c/0x40 ] [000133b8 : 0x133c0 ]
WARNING: at mm/vmalloc.c:105 vmap_pte_range()
[f005a93c : sys_init_module+0x70/0x1b64 ] [f00155c8 :
syscall_is_too_hard+0x3c/0x40 ] [000133b8 : 0x133c0 ]
WARNING: at mm/vmalloc.c:105 vmap_pte_range()
[f005a93c : sys_init_module+0x70/0x1b64 ] [f00155c8 :
syscall_is_too_hard+0x3c/0x40 ] [000133b8 : 0x133c0 ]
but I can obtain the same message with SuperSPARC-II.
Regards,
JKB
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
