Re: [ANNOUNCE] Aurora SPARC Linux Build 2.99 (Beta 2 for 3.0)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



David Miller wrote:
> From: Bernd Zeimetz <bernd@xxxxxxx>
> Date: Sat, 01 Dec 2007 13:43:30 +0100
> 
>>>> - Systems that boot off qlogic attached disks are not supported, because 
>>>> there is no working firmware loader in anaconda, and the qlogic driver 
>>>> needs firmware.
>>> That's very unfortunate, how are qlogic device handled on other
>>> platforms?
>> In Debian you just install the firmware package, udevl will handle it
>> then. If you have to boot from it, you need to rebuild your initrd after
>> installing the firmware package.
>> The installer doesn't support non-free modules yet unfortunately, but
>> with some not too complicated tricks you can install Debian without
>> problems.
> 
> I said "other platforms" as in x86, x86_64, powerpc.

Just the same. You can even install the firmware on hardware where you
wouldn't be able use a qlogic card. It's only loaded if an appropriate
device is detected.

-- 
Bernd Zeimetz
<bernd@xxxxxxx>                         <http://bzed.de/>
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Kernel Development]     [DCCP]     [Linux ARM Development]     [Linux]     [Photo]     [Yosemite Help]     [Linux ARM Kernel]     [Linux SCSI]     [Linux x86_64]     [Linux Hams]

  Powered by Linux