From: Daniel Smolik <marvin@xxxxxxxxxx>
Date: Thu, 22 Feb 2007 15:29:45 +0100
> Here are required logs.
Daniel and others seeing this problem, please give this
patch a try, if it fails please provide a new "of_debug=3"
kernel bootup debug log with the patch applied so I can
diagnose this further.
Thanks!
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index b0f3e00..ad74e5e 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -708,7 +708,7 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp,
unsigned int irq)
{
struct linux_prom_pci_registers *regs;
- unsigned int devfn, slot, ret;
+ unsigned int bus, devfn, slot, ret;
if (irq < 1 || irq > 4)
return irq;
@@ -717,10 +717,46 @@ static unsigned int __init pci_irq_swizzle(struct device_node *dp,
if (!regs)
return irq;
+ bus = (regs->phys_hi >> 16) & 0xff;
devfn = (regs->phys_hi >> 8) & 0xff;
slot = (devfn >> 3) & 0x1f;
- ret = ((irq - 1 + (slot & 3)) & 3) + 1;
+ if (pp->irq_trans) {
+ /* Derived from Table 8-3, U2P User's Manual. This branch
+ * is handling a PCI controller that lacks a proper set of
+ * interrupt-map and interrupt-map-mask properties. The
+ * Ultra-E450 is one example.
+ *
+ * The bit layout is BSSLL, where:
+ * B: 0 on bus A, 1 on bus B
+ * D: 2-bit slot number, derived from PCI device number as
+ * (dev - 1) for bus A, or (dev - 2) for bus B
+ * L: 2-bit line number
+ *
+ * Actually, more "portable" way to calculate the funky
+ * slot number is to subtract pbm->pci_first_slot from the
+ * device number, and that's exactly what the pre-OF
+ * sparc64 code did, but we're building this stuff generically
+ * using the OBP tree, not in the PCI controller layer.
+ */
+ if (bus & 0x80) {
+ /* PBM-A */
+ bus = 0x00;
+ slot = (slot - 1) << 2;
+ } else {
+ /* PBM-B */
+ bus = 0x10;
+ slot = (slot - 2) << 2;
+ }
+ irq -= 1;
+
+ ret = (bus | slot | irq);
+ } else {
+ /* Going through a PCI-PCI bridge that lacks a set of
+ * interrupt-map and interrupt-map-mask properties.
+ */
+ ret = ((irq - 1 + (slot & 3)) & 3) + 1;
+ }
return ret;
}
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
