>On Fri, 2007-01-26 at 16:05 -0600, Tom 'spot' Callaway wrote: >> On Sun, 2007-01-21 at 17:25 +0200, Meelis Roos wrote: >> > TS> Warning: unable to open an initial console. >> > >> > Try to use network console if the native console is not supported. >> > netconsole=..., see Documentation/networking/netconsole.txt >> >> It was a good idea, but unfortunately: >> >> eth0: Quattro HME slot 0 (SBUS) 10/100baseT Ethernet 08:00:20:b7:8f:c8 >> eth1: Quattro HME slot 1 (SBUS) 10/100baseT Ethernet 08:00:20:b7:8f:c9 >> eth2: Quattro HME slot 2 (SBUS) 10/100baseT Ethernet 08:00:20:b7:8f:ca >> eth3: Quattro HME slot 3 (SBUS) 10/100baseT Ethernet 08:00:20:b7:8f:cb >> netconsole: eth0 doesn't support polling, aborting. >> >> Yes, I have an e10k too. :) > >Even when I mount a valid root over NFS, the kernel always says: >Warning: unable to open an initial console. >VFS: Mounted root (nfs filesystem) readonly. >Warning: unable to open an initial console. Create /dev/console as char(5,1) on the root fs. -`J' -- - To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html