From: Mikael Pettersson <mikpe@xxxxxxxx> Date: Sun, 9 Jul 2006 12:40:58 +0200 (MEST) > 2.6.17-git7 was the last development kernel to boot on my U5. > 2.6.17-git8 to -git15 all hang immediately after being loaded. > 2.6.17-git16 to 2.6.18-rc1 partially boot but crash and burn in > different places depending on kernel configuration: my standard > config got alignment exceptions in the floppy driver followed by > (sabre?) PCI errors and a hang; a minimal kernel gets further but > fails "su" probe and then oopses hard when the /dev/hda partition > table is about to be printed. > > I'll try to capture the kernel messages soon, but I don't have > a null-modem serial cable to the U5 yet, and my attempts to use > a digital camera only resulted in blurry pictures of the screen :-( I have an ultra5 here, I'll give it some testing. I bet I messed up the interrupt mapping register handling for the Sabre pci controller. Thanks for the report. - To unsubscribe from this list: send the line "unsubscribe sparclinux" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
